Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI63X100S
AirTAC B06-SI Battery-Specific ISO Cylinder B06-SI63X100S Specifications
- Model: B06-SI63X100S
- Series: Battery-optimized ISO 15552 compliant
- Bore size: 63mm (ISO 6432 standard)
- Stroke: 100mm (±1.5mm tolerance)
- Operating pressure: 0.1-0.9 MPa
- Temperature range: -20℃ to 80℃
- Cushioning: Adjustable pneumatic cushion (dual-side)
- Mounting style: Basic type (MF1) with optional foot/rod/flange mounts
- Port size: M5x0.8 (G1/8 NPT optional)
- Piston rod thread: M16x1.5
- Tube material: Anodized aluminum alloy (AlSi10Mg)
- Seal material: NBR standard (FKM available for high-temp)
- Weight: 1.8kg (without accessories)
- Dimensions: 200mm(L) × 82mm(W) × 82mm(H) (at full extension)
- Rod end type: Female thread with shock-absorbing cap
- Lubrication: Pre-lubricated (DOP-free grease)
- Corrosion resistance: Class CRC2 (ISO 9227 salt spray 96hrs)
High-efficiency pneumatic cylinder specifically engineered for battery manufacturing environments. Features nickel-plated piston rod and IP67-rated seals to withstand electrolyte exposure. The symmetrical cushion design minimizes vibration during high-cycle operations (up to 3,000,000 cycles @ 0.5MPa). Includes built-in magnetic sensor slots (M5x8mm) for position feedback.
- Lithium battery cell stacking mechanisms
- Battery module compression fixtures
- Electrode plate handling robots
- EV battery pack assembly lines
- Electrolyte filling station actuators
Installation guidelines:
Use with filtered air (5-40μm) at dew point -20℃ below ambient.
For vertical mounting, install rod end downward to prevent condensate
accumulation. Torque mounting bolts to 12-15N·m using cross pattern tightening sequence.
| Property | Property Value |
|---|---|
| sku | B06-SI63X100S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.