Airtac B06-SI Battery Dedicated ISO Standard Cylinder B06-SI80X50
AirTAC B06-SI80X50 Battery-Optimized ISO Cylinder Specifications
- Model: B06-SI80X50
- Standard: ISO 15552 compliant
- Bore size: 80mm
- Stroke: 50mm (±1mm tolerance)
- Operation type: Double-acting
- Working pressure: 0.1–1.0 MPa
- Piston speed: 50–800 mm/s (lubricated)
- Cushioning: Adjustable elastic cushion (both ends)
- Rod thread: M16×1.5
- Ambient temperature: -20℃ to 80℃
- Seal material: Heat-resistant NBR (Nitrile Butadiene Rubber)
- Body material: Anodized aluminum alloy (6063-T5)
- Weight: 2.45 kg (bare cylinder), 2.68 kg (with magnetic switch)
- Dimensions: 232mm (L) × 80mm (Bore Ø) × 50mm (Stroke)
- Extended length: 282mm
- Retracted length: 232mm
- Mounting base: 125mm × 32mm
- Special features: Low-friction design (≤0.015 dynamic friction coefficient), IP67 protection
Engineered for battery-powered pneumatic systems, this ISO cylinder features 30% reduced energy consumption through optimized seal geometry. The chromium-plated piston rod integrates with a built-in magnetic field enhancer for reliable sensor detection. Anti-corrosion coating withstands 500hr salt spray test per ASTM B117.
- Mobile battery-operated assembly robots
- Solar-powered agricultural actuators
- EV battery pack handling systems
- Portable medical compression devices
- Off-grid material handling equipment
Installation protocol:
Requires M12 anti-rotation brackets for vertical mounting.
Lubricate with ISO VG32 hydraulic oil (0.3cc minimum) before initial use.
Maintain 15mm clearance around cylinder body for heat dissipation.
Not compatible with phosphate ester
hydraulic fluids. Maximum side load: 180N at mid-stroke.
For continuous cycling >50% duty cycle, install heat sink kit HSK-B06.
| Property | Property Value |
|---|---|
| sku | B06-SI80X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.