Airtac B52-F-M-U Rod End Complete Assembly B52-F-M10X125U
AirTAC B52-F-M-U Series Ball Joint Rod End Assembly B52-F-M10X125U
- Full model designation: B52-F-M10X125U
- Type: Heavy-duty self-lubricating ball joint
- Thread specification: M10×1.25 male thread
- Rod diameter: 8mm precision ground shaft
- Total length: 125mm (threaded portion 25mm)
- Angular misalignment: ±25° free rotation
- Static load capacity: 2,450N (axial), 1,120N (radial)
- Dynamic load capacity: 1,750N (axial), 800N (radial)
- Ball material: Carbon steel with nickel plating
- Housing material: Cold forged steel
- Bearing: Composite polymer liner (PTFE reinforced)
- Temperature range: -20℃ to 80℃
- Surface treatment: Electro-galvanized with yellow chromate
- Installation torque: 45-50 Nm (using 17mm hex wrench)
- Vibration resistance: 5-2000Hz, 15G acceleration
- IP rating: IP65 (dust-tight & protected against water jets)
- Weight: 320g ±5g
- Dimensions: 125mm(L) × 16mm(Φ shaft) × 28mm(H housing)
Precision-engineered rod end bearing with integrated locking nut, designed for high-cycle pneumatic and mechanical linkages. Features triple-sealed rotation (radial lip seal + dual O-rings) and maintenance-free operation. The cold-forged housing provides 30% higher impact resistance compared to standard cast units. Includes pre-applied thread locker on male threads for vibration resistance.
- Robotic arm articulation joints in assembly lines
- Pneumatic cylinder pivot points in packaging machinery
- Suspension linkage in automotive test rigs
- Adjustable sensor mounts for industrial automation
- Conveyor system tensioning mechanisms
Maintenance advisory:
While designed as maintenance-free, inspect every 50,000 cycles for play exceeding 0.5mm.
Avoid chemical cleaners that might degrade PTFE liner. For M10 installation, use torque wrench
with 17mm crowfoot adapter to prevent housing deformation.
- Alternative thread options: M8×1.25 to M20×1.5 available
- Custom lengths: 50mm to 300mm (in 25mm increments)
- High-temperature variant: Up to 150℃ with PEEK liner
| Property | Property Value |
|---|---|
| sku | B52-F-M10X125U |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.