Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC100X700
AirTAC B04-SC Construction Machinery-Specific Standard Cylinder B04-SC100X700 Specifications
- Model: B04-SC100X700
- Series: Heavy-duty SC series (Construction Machinery Special)
- Bore size: Φ100mm
- Stroke: 700mm
- Operating pressure: 0.05-1.2MPa
- Medium temperature: -20℃ to 80℃
- Buffer type: Adjustable hydraulic cushion (both ends)
- Mounting style: Standard MF1/MB1 flange & foot mounts
- Port size: G1/2 (BSPP thread)
- Piston material: High-grade aluminum alloy with hard anodizing
- Rod material: Chrome-plated carbon steel (Cr-Mo)
- Seal type: HNBR seals with wear indicators
- Weight: 16.8kg (without accessories)
- Dimensions:
- Extended length: 1135mm
- Retracted length: 435mm
- Body diameter: 122mm
- Rod end thread: M45×1.5
- Protection class: IP65 (wipers included)
- Lubrication: Pre-lubricated (Grease-free operation possible)
Heavy-wall cylinder engineered for extreme construction environments, featuring triple chrome plating on piston rods and impact-resistant end caps. The reinforced rod bearing design withstands 3x higher side loads than standard cylinders. Integrated shock absorbers prevent metal-to-metal contact at stroke ends. Compatible with auto-switch sensors via T-slot mounting.
- Excavator bucket positioning mechanisms
- Concrete pump truck boom actuators
- Pile driver impact systems
- Crane outrigger stabilization controls
- Rock crusher jaw plate adjusters
Installation protocol:
Requires 200-hour break-in period with reduced pressure (0.3MPa max).
Must use 40μm filtration and water separator. Rod end must be supported
within 0.2mm alignment tolerance. Monthly lubrication recommended for
high-vibration applications.
| Property | Property Value |
|---|---|
| sku | B04-SC100X700 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.