Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC40X25S
AirTAC B04-SC40X25S Construction Machinery Standard Cylinder Specifications
- Model Series: B04-SC (Construction Machinery Special)
- Bore Size: Ø40mm
- Stroke: 25mm
- Operation Type: Double-acting
- Working Pressure: 0.15-1.0 MPa
- Temperature Range: -20℃ to 80℃
- Cushioning: Adjustable rubber buffers (both ends)
- Port Size: 1/4" NPT (G1/8 optional)
- Piston Rod Material: Chrome-plated carbon steel
- Tube Material: Aluminum alloy (hard anodized)
- Seal Material: NBR (Nitrile) with wear-resistant ring
- Mounting Type: Basic foot mounting (ISO 15552 standard)
- Weight: 2.8kg (with standard accessories)
- Dimensions: 215mm(L) × 62mm(W) × 62mm(H) (at mid-stroke position)
- Protection Rating: IP65 (dust-tight & protected against water jets)
- Magnetic Sensor: Pre-installed (SMCR-25 compatible)
Heavy-duty pneumatic cylinder engineered for construction equipment applications. Features enhanced corrosion resistance through multi-layer surface treatment (chromate conversion + epoxy coating). The reinforced rod gland design withstands lateral forces common in excavator attachments. Includes 3-position mounting holes for flexible installation alignment.
- Excavator bucket control mechanisms
- Concrete pump truck boom positioning
- Forklift mast tilt adjustment
- Pile driver impact systems
- Crane outrigger stabilization
Maintenance protocol:
Lubricate through air supply (ISO VG32 recommended) every 500 operating hours.
Avoid axial misalignment exceeding ±2° during installation. Maximum side load capacity: 120N.
Critical note:
Requires 5-10μm filtration for abrasive environments. Not suitable for
continuous impact cycles exceeding 80 CPM (cycles per minute).
| Property | Property Value |
|---|---|
| sku | B04-SC40X25S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.