Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC50X125
AirTAC B04-SC50X125 Construction Machinery Standard Cylinder Specifications
- Model: B04-SC50X125
- Series: B04-SC (Construction Machinery Series)
- Bore diameter: 50 mm
- Stroke: 125 mm
- Operating pressure: 0.05–1.0 MPa
- Temperature range: -20℃ to 80℃
- Port size: Rc1/4 (G1/4 optional)
- Cushion type: Adjustable air cushion (both ends)
- Mounting type: MF1 (Front flange) / LB5 (Rear pivot)
- Piston rod material: Hard chrome-plated steel
- Tube material: Aluminum alloy with hard anodizing
- Seal material: NBR + Polyurethane (wear-resistant)
- Protection rating: IP54 (standard dust/moisture resistance)
- Weight: 2.8 kg (bare cylinder without accessories)
- Dimensions:
- Extended length: 275 mm
- Retracted length: 150 mm
- Tube outer diameter: 63 mm
- Mounting base width: 38 mm
Heavy-duty pneumatic cylinder engineered for construction equipment applications. Features enhanced structural rigidity with thick-walled aluminum alloy tubing and triple-sealing system. The chrome-plated piston rod incorporates a hardened layer (HRC 45-50) for abrasion resistance in gritty environments. Designed for 5000km+ service life under ISO 15552 standards.
- Excavator boom positioning mechanisms
- Concrete pump truck outrigger controls
- Pile driver hammer actuation systems
- Crane cabin rotation limiters
- Asphalt compactor vibration dampers
Installation note:
Requires SAE 10-30 turbine oil lubrication for optimal performance.
Avoid side-load forces exceeding 15% of maximum thrust capacity.
Recommend using M12x1.25 mounting bolts (Grade 8.8 or higher).
| Property | Property Value |
|---|---|
| sku | B04-SC50X125 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.