Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC63X1400S
AirTAC B04-SC63X1400S Construction Machinery Standard Cylinder Specifications
- Model: B04-SC63X1400S
- Series: B04-SC Heavy Duty Construction Series
- Bore size: 63mm
- Stroke: 1400mm
- Operating pressure: 0.05–1.0 MPa
- Temperature range: -20℃ to 80℃
- Port size: Rc1/4 (NPT1/4 optional)
- Cushioning type: Adjustable rubber buffer
- Mounting style: MF1 (Basic front flange)
- Material: Aluminum alloy barrel, CR12MoV piston rod
- Seal material: NBR + PU hybrid seals
- Protection rating: IP67 (Dust-tight & water immersion resistant)
- Lubrication: Pre-lubricated (Oil-free operation possible)
- Corrosion resistance: Hard anodized piston rod surface
- Weight: 12.8kg ±5% (Without accessories)
- Dimensions: 1630mm(L) × 100mm(W) × 100mm(H)
Heavy-wall cylinder engineered for construction equipment durability, featuring enhanced side load capacity through reinforced rod bearing design. The chrome-molybdenum piston rod undergoes multi-stage polishing and hardening treatment (HRC 45-50) to withstand abrasive environments. Includes anti-rotation guide mechanism for precise linear motion in vibratory conditions.
- Excavator bucket control mechanisms
- Concrete pump truck boom positioning
- Crane outrigger extension systems
- Pile driver impact hammer actuation
- Road roller vibration unit activation
Installation note:
Requires minimum 50mm parallel alignment tolerance. Use rod-end spherical bearings
to compensate for angular misalignment. Apply Molykote 111 grease to piston rod
before initial operation in high-dust environments.
Maintenance alert:
Inspect wiper seal every 500 operating hours under heavy particulate exposure.
Maximum side load capacity 280N at full extension. Avoid rapid pressure changes
exceeding 0.5 MPa/sec.
| Property | Property Value |
|---|---|
| sku | B04-SC63X1400S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.