Airtac B04-SC Construction Machinery Special Standard Cylinder B04-SC80X200
AirTAC B04-SC80X200 Construction Machinery Standard Cylinder Specifications
- Model: B04-SC80X200
- Bore size: 80mm (ISO 6432 compliant)
- Stroke: 200mm (customizable up to 500mm)
- Operating pressure: 0.05-1.0 MPa (7-145 psi)
- Cushioning type: Adjustable pneumatic cushion at both ends
- Port size: G1/2 (NPT 1/2 optional)
- Piston speed: 50-750 mm/s (lubricated)
- Ambient temperature: -20℃ to +80℃
- Seal material: NBR + Polyurethane (oil & abrasion resistant)
- Rod material: Hard chrome-plated carbon steel
- Mounting type: Basic front flange (MF2) & rear foot (MP4)
- Weight: 5.8kg ±2% (without accessories)
- Dimensions:
- Length: 347mm (full retracted)
- Width: 108mm (mounting flange span)
- Height: 108mm (cylinder body diameter)
Heavy-duty double-acting cylinder engineered for construction equipment, featuring enhanced side load capacity through integrated guide ribs. The chrome-plated piston rod incorporates a multi-layer scraper system to prevent debris ingress in high-particulate environments. Requires ISO VG32 hydraulic oil or equivalent lubrication.
- Excavator bucket linkage actuation
- Concrete pump truck outrigger positioning
- Bulldozer blade angle adjustment
- Crane boom locking mechanisms
- Pile driver impact dampening systems
Installation protocol:
Align within 0.2mm/m parallelism tolerance during mounting.
Apply thread locker to all fasteners (Grade 8.8 or higher).
Perform 50-cycle dry run before full load operation.
- Relubricate every 500km of cumulative stroke movement
- Inspect rod surface roughness (Ra ≤0.4μm) quarterly
- Replace cushion seals after 1 million cycles
| Property | Property Value |
|---|---|
| sku | B04-SC80X200 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.