Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD50X175S
AirTAC B04-SUD50X175S Construction Machinery Cylinder Specifications
- Series: B04-SUD (Heavy-Duty Construction Series)
- Bore size: 50mm (ISO 6432 standard)
- Stroke: 175mm (±1.5mm tolerance)
- Operating pressure: 0.05-1.2 MPa
- Cushioning type: Adjustable pneumatic cushion at both ends
- Operating temperature: -20℃ to 80℃
- Piston speed: 50-800 mm/s (lubricated)
- Mounting style: Basic type (MF1) with front/rear threaded ports
- Port size: G1/2 (BSPP thread)
- Seal material: Nitrile rubber (NBR) + Wear-resistant ring
- Rod material: Chrome-plated carbon steel (S45C)
- Tube material: Anodized aluminum alloy
- Weight: 2.8kg (without accessories)
- Dimensions: 256mm(L) × 60mm(W) × 60mm(H) (retracted state)
- Rod end thread: M16×1.5 (external)
- Position detection: Pre-drilled slots for magnetic sensors
- ISO standard: 15552 compliant
Heavy-wall cylinder specifically engineered for construction equipment, featuring triple chrome plating on piston rods and impact-resistant end caps. The enhanced rod bearing design withstands lateral forces common in excavator attachments. Includes built-in auto-dust wipers and IP66-rated seals for debris protection.
- Excavator bucket control mechanisms
- Concrete pump truck outrigger systems
- Bulldozer blade angle adjustment
- Crane boom locking devices
- Drilling rig stabilizer actuation
Installation note:
Requires minimum 10μm filtration. For vertical mounting,
use rod-down orientation to prevent condensate accumulation.
Apply ISO VG32 hydraulic oil if manual lubrication needed.
Critical parameters:- Maximum side load: 180N at mid-stroke
- Cycle life: 5,000km travel distance (20℃, clean air)
- Rebuild interval: 2 million cycles (under rated pressure)
| Property | Property Value |
|---|---|
| sku | B04-SUD50X175S |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.