Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD50X50
AirTAC B04-SUD50X50 Construction Machinery Cylinder Specifications
- Model: B04-SUD50X50
- Type: Double-acting pneumatic cylinder (construction machinery series)
- Bore size: 50mm
- Stroke: 50mm
- Operating pressure: 0.15–0.8 MPa
- Temperature range: -20℃ to 80℃
- Port size: G1/8 (standard) with dual mounting threads
- Cushioning: Adjustable pneumatic cushioning at both ends
- Material:
- Tube: Hard anodized aluminum alloy
- Piston rod: Chrome-plated steel (rod diameter 16mm)
- Seals: NBR (nitrile rubber) with wear-resistant guide rings
- Weight: 2.5kg (excluding accessories)
- Dimensions:
- Extended length: 200mm (base to rod end at full stroke)
- Retracted length: 150mm
- Mounting base: 80mm × 80mm square flange
- Rod end thread: M10×1.25
- Protection rating: IP65 (standard wiper design)
- Lubrication: Pre-lubricated (recommended oil viscosity: ISO VG32)
Heavy-duty cylinder engineered for construction equipment applications, featuring enhanced structural rigidity and contamination resistance. The hardened piston rod and multi-layered sealing system withstand high lateral loads and vibration. Requires 5μm filtered air with automatic lubrication for optimal performance.
- Excavator bucket positioning mechanisms
- Loader arm articulation control
- Forklift mast tilt adjustment
- Compactor vibration dampening systems
- Agricultural machinery gate actuators
Installation note:
Use reinforced mounting brackets for dynamic applications.
Maintain 0.5-1mm clearance between rod end and load during alignment.
Perform monthly grease replenishment (ISO-L-AGB lubricant recommended).
| Property | Property Value |
|---|---|
| sku | B04-SUD50X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.