Airtac B04-SUD Construction Machinery Special Standard Cylinder B04-SUD63X50
AirTAC B04-SUD63X50 Construction Machinery Cylinder Specifications
- Series: B04-SUD (Construction Machinery Special)
- Bore size: 63mm
- Stroke: 50mm
- Operating pressure: 0.1–1.0 MPa
- Operating medium: Dry air (ISO8573-1:2010 Class 3)
- Ambient temperature: -20℃ to 80℃
- Cushioning type: Adjustable air cushion (both ends)
- Mounting type: Square flange (ISO15552 compliant)
- Port size: G1/2 (BSPP thread)
- Piston rod material: Chrome-plated carbon steel (HRC 35-40)
- Tube material: Anodized aluminum alloy
- Seal material: Heat-resistant NBR (+5℃ to +100℃)
- Weight: 3.2kg (excluding accessories)
- Dimensions:
- Extended length: 297mm
- Retracted length: 247mm
- Flange width: 100mm
- Rod end thread: M20×1.5
- Lubrication: Pre-lubricated (Non-re-lube design)
- Protection class: IP65 (Dust-tight & water jet resistant)
Heavy-duty pneumatic cylinder engineered for construction equipment applications, featuring reinforced structure and corrosion-resistant coatings. The dual-cushion design minimizes impact at stroke ends during high-speed operations. Anti-rotation mechanism ensures stable load handling under lateral forces.
- Excavator bucket positioning systems
- Concrete pump truck boom actuators
- Loader arm articulation controls
- Drilling rig feed mechanisms
- Crane outrigger stabilization
Installation requirements:
Requires minimum 40μm filtration with automatic drain.
Mounting surface flatness ≤0.1mm.
Maximum allowable side load: 15% of thrust rating.
Recommend using 2:1 safety factor for dynamic loads.
- Inspect rod seals every 500km stroke travel
- Replace cushion seals every 2 million cycles
- Lubricator required if operated >0.5m/s
| Property | Property Value |
|---|---|
| sku | B04-SUD63X50 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.