Airtac B06-SU Battery Dedicated Standard Cylinder B06-SU100X200
AirTAC B06-SU Battery-Optimized Standard Cylinder B06-SU100X200 Technical Details
- Full model designation: B06-SU100X200-S
- Bore size: Φ100mm (3.94")
- Stroke: 200mm (7.87")
- Operating pressure range: 0.05–1.0 MPa (7–145 PSI)
- Ambient temperature: -20℃ to 80℃ (-4°F to 176°F)
- Cushioning type: Adjustable air cushion (both ends)
- Piston speed: 50–800 mm/s (with cushioning)
- Mounting options: Basic type (MF1), front flange (MF2), rear flange (MF3)
- Rod thread: M20×1.5 (ISO metric standard)
- Material composition:
- Tube: Aluminum alloy (hard anodized)
- Piston rod: Chrome-plated stainless steel (SUS304)
- Seals: NBR (nitrile rubber) with wear-resistant ring
- Weight: 5.8 kg (12.8 lbs) ±3%
- Dimensions:
- Total length: 385mm (15.16")
- Width (square tube): 120mm (4.72")
- Height (with mounting brackets): 135mm (5.31")
- Air port size: G3/8 (BSPP thread)
- Lubrication: Pre-lubricated (DOP-free grease), maintenance-free operation
Heavy-duty pneumatic cylinder specifically engineered for battery manufacturing and energy storage systems. Features enhanced corrosion resistance with double-layered chrome plating on piston rods and IP67-rated dust/water protection. The optimized seal design minimizes internal leakage (<0.5 mL/min at 0.5 MPa) while maintaining smooth movement under variable loads up to 785N.
- Lithium battery cell stacking mechanisms
- Battery module compression fixtures
- Energy storage cabinet door actuators
- EV battery pack assembly lines
- Battery recycling equipment pushers
Installation protocol:
Requires horizontal mounting for optimal performance. Use locknuts (M20×1.5) with 40–50 N·m torque.
Install moisture separator when operating below 0℃. Avoid side-load forces exceeding 200N.
| Property | Property Value |
|---|---|
| sku | B06-SU100X200 |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.