AirTAC Pneumatics
AirTAC SDAD Series Double-Rod Compact Cylinders
The AirTAC SDAD series is a double-rod compact (thin) air cylinder spanning 12-100 mm bores, delivering equal push and pull force with built-in anti-rotation for space-saving automation.
inventory_2782 models availableSeries Overview
The AirTAC SDAD series is the double-rod version of the SDA compact (thin) cylinder family. A rod exits both ends, so the push and pull forces are equal in both directions. The twin rods also resist rotation and guide the load directly, eliminating the need for external guide rails in many setups.
The range spans 10 bores from 12 to 100 mm. Port sizes scale with the bore: M5x0.8 for 12-25 mm, PT1/8 for 32-40 mm, PT1/4 for 50-63 mm, and PT3/8 for 80-100 mm. Because the pull side has equal force, the force class at 0.5 MPa spans roughly 45 N on the 12 mm bore up to about 3600 N on the 100 mm bore.
Shared design features include a double-acting mechanism, a space-saving riveted body with C-clip retention, and fixed NBR bumpers that decelerate the piston near stroke end. Magnetic-switch grooves allow for position sensing using -S magnet options. This is a compact thin cylinder, not a tie-rod or ISO cylinder. Within the family, SDA is the single-rod version and SDAJ offers adjustable stroke.
Browse Models
Airtac SDAD Double Rod Slim Cylinder SDAD100X75SB
SKU: SDAD100X75SB
$195.17$202.67
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X70SB
SKU: SDAD100X70SB
$191.66$199.16
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X50B
SKU: SDAD100X50B
$160.28$167.78
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X70B
SKU: SDAD100X70B
$173.30$180.80
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X5SB
SKU: SDAD100X5SB
$149.11$156.61
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X30SB
SKU: SDAD100X30SB
$164.93$172.43
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X65SB
SKU: SDAD100X65SB
$187.73$195.23
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X45
SKU: SDAD100X45
$156.76$164.26
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X30B
SKU: SDAD100X30B
$147.25$154.75
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X25
SKU: SDAD100X25
$143.73$151.23
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X20
SKU: SDAD100X20
$140.73$148.23
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X45SB
SKU: SDAD100X45SB
$174.91$182.41
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X55
SKU: SDAD100X55
$163.53$171.03
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X15S
SKU: SDAD100X15S
$155.36$162.86
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X35
SKU: SDAD100X35
$150.50$158.00
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X20S
SKU: SDAD100X20S
$158.88$166.38
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X5S
SKU: SDAD100X5S
$149.11$156.61
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X15B
SKU: SDAD100X15B
$137.22$144.72
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X120
SKU: SDAD100X120
$217.04$224.54
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X55B
SKU: SDAD100X55B
$163.53$171.03
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X25SB
SKU: SDAD100X25SB
$162.34$169.84
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X120SB
SKU: SDAD100X120SB
$238.18$245.68
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X45S
SKU: SDAD100X45S
$174.91$182.41
schedule Confirm lead time
Airtac SDAD Double Rod Slim Cylinder SDAD100X110B
SKU: SDAD100X110B
$207.01$214.51
schedule Confirm lead time
Typical Applications
Pick-and-Place Transfer
Twin rods resist torsional load during rapid part transfers on conveyor lines, keeping grippers aligned without external guides.
Carton Flap Folding
Equal push and pull force ensures symmetric folding pressure on packaging machines, while the compact riveted body saves space.
PCB Handling Jaws
The anti-rotation property of the double rods prevents jaw twist during delicate electronic board gripping and lifting.
How to Choose the Right Model
Choose the bore size based on your load and the equal bidirectional force requirement. Smaller 12-25 mm bores fit tight spaces with M5x0.8 ports, while 80-100 mm bores provide up to roughly 3600 N of force at 0.5 MPa using PT3/8 ports. Pick the SDAD specifically when you need anti-rotation, a rear sensor cam, or equal force both ways in a thin envelope. Step out of this series to the SDA if single-rod action is sufficient, to SDAJ for adjustable stroke, or to the ACQD if you need a JIS double-rod compact equivalent.
When requesting a quote, confirm these five points: 1) the exact bore size (12-100 mm), 2) the required stroke length, 3) the port thread size (M5x0.8, PT1/8, PT1/4, or PT3/8), 4) the mounting style, and 5) whether you need the magnet option (-S) for switch sensing. The fixed NBR bumper only decelerates the piston; it does not hold position. If load holding is needed when pressure is lost, a mechanical lock or pilot check valve is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and available mounting space
- ✓ Port / thread type (PT / NPT / G)
- ✓ Sensor / magnet option (-S)?
- ✓ Side load — consider a guided model
Frequently Asked Questions
The series spans 10 bores from 12 to 100 mm. Because it is a double-rod cylinder, the push and pull forces are equal. At 0.5 MPa, the force spans roughly 45 N on the 12 mm bore up to about 3600 N on the 100 mm bore.
The SDAD is the double-rod version of the SDA compact thin cylinder, providing equal push/pull force, anti-rotation, and a rear sensor cam. The SDA is the single-rod version, while the SDAJ offers adjustable stroke. The JIS double-rod compact equivalent is the ACQD.
No, the SDAD is a compact riveted thin cylinder, not a tie-rod or ISO cylinder. It uses fixed NBR bumpers that only decelerate the piston near stroke end. As a double-acting air cylinder, it does not hold position when pressure is lost; a mechanical lock or pilot check valve is required for load holding.
Port sizes scale with the bore. The 12-25 mm bores use M5x0.8 ports, the 32-40 mm bores use PT1/8, the 50-63 mm bores use PT1/4, and the 80-100 mm bores use PT3/8. Confirm specific dimensions from the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote
Send us the model number, quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.