Airtac SDAD Double Rod Slim Cylinder SDAD100X35
The AirTAC Airtac SDAD Double Rod Slim Cylinder SDAD100X35 is a genuine double-acting COMPACT cylinder with a piston rod out BOTH ends (Ø100mm bore, 35mm stroke). The through-rod resists twisting and lets you drive a tool on one end while a switch or dog reads position on the other — with identical force in both directions.
- BoreØ100 mm
- Stroke35 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM18×1.5 (F) / M26×1.5 (B)
- CushionFixed NBR bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SDAD Double Rod Slim Cylinder SDAD100X35
The AirTAC SDAD100X35 is a double-acting compact cylinder featuring a 100mm bore and a 35mm stroke. Its through-rod design exits both ends of the riveted body, ensuring the annular area remains identical on extend and retract strokes. Consequently, push and pull forces are perfectly balanced at 3524.9 N at 0.5 MPa, providing stable performance for heavy symmetric loads.
This model features a 32mm piston rod and PT3/8 air ports. The short body geometry saves axial mounting depth compared to standard round-body options. End-of-stroke deceleration is handled by a fixed NBR bumper, which absorbs shock but is not an adjustable air cushion. Because this specific SKU lacks the S magnet suffix, it cannot directly mount AirTAC reed or electronic switches.
Airtac SDAD Double Rod Slim Cylinder SDAD100X35 Technical Specifications
| Model | Airtac SDAD Double Rod Slim Cylinder SDAD100X35 |
|---|---|
| Series | SDAD compact double-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting, rod both ends |
| Port size | PT3/8 |
| Rod end thread | M18×1.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed NBR bumper (both ends) |
| Max standard stroke | Up to 120 mm |
Because a rod occupies both cylinder chambers, the effective area — and therefore the force — is identical in both directions. Specifications follow the official AirTAC SDAD datasheet.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 3525 N |
| 0.7 MPa | 4935 N |
| Max (@1.0 MPa) | 719 kgf |
Force uses the annular (rod-side) area on both strokes, so extend and retract match. Actual usable force is lower than theoretical due to friction. Size with a safety margin.
Model Code: Airtac SDAD Double Rod Slim Cylinder SDAD100X35
| SDAD | Compact double-acting cylinder, rod out both ends. |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rods (omit = female thread). |
Thread: PT standard. Related SDA-family variants: SDA (single rod), SSA/STA (single acting), SDAJ (adjustable stroke), SDAT (duplex), SDAW (duplex-end).
Where the Airtac SDAD Double Rod Slim Cylinder SDAD100X35 Is Used
Heavy Press Tooling
Drives a forming die from one rod end while a dog trips a mechanical limit on the opposite end, utilizing the 4934.8 N force at 0.7 MPa for symmetric pressing.
Vertical Lift Platform
Lifts a 179.7 kg payload with a 2:1 safety margin, relying on the through-rod to prevent platform twist during elevation and descent.
Riveting Station
Applies equal 3524.9 N clamping force on both extend and retract strokes to secure heavy metal assemblies within a tight axial footprint.
Is the Airtac SDAD Double Rod Slim Cylinder SDAD100X35 the Right Cylinder?
When sizing this actuator, consider the SDAD80 if your layout permits, which yields 2267.8 N at 0.5 MPa. The SDAD100X35 is the largest bore in the family, delivering a robust 4934.8 N at 0.7 MPa. For safe vertical lifting, expect a working load around 2115 N, equating to roughly 179.7 kg with a 2:1 safety margin. The through-rod geometry resists twisting and allows tooling on one end with a dog on the opposite side.
Confirm the 100mm bore, 35mm stroke, and female M18x1.5 rod-end threads suit your tooling. Note that a plain cylinder drifts when air is lost or the valve centers; the fixed NBR bumper only decelerates near stroke end and does not lock the load. For load holding without live pressure, install an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Need equal force both directions?
- ✓ Anti-rotation / dual-end mounting?
- ✓ Space for a rod that exits both ends
- ✓ Port/thread type (PT)
- ✓ Magnet (S) for sensors?
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Leave clearance for the rod exiting both ends.
- check Avoid side load on either rod end.
- check Front/rear covers are riveted — do not dismantle.
- check Installation by qualified personnel per AirTAC docs.
Airtac SDAD Double Rod Slim Cylinder SDAD100X35 FAQ
The push and pull forces are identical because the rod occupies both chambers. It generates 3524.9 N at 0.5 MPa, 4934.8 N at 0.7 MPa, and a theoretical maximum of 719 kgf at 1.0 MPa. The maximum operating pressure is 1.0 MPa.
No, this specific SKU lacks the S magnet suffix, so it cannot trigger AirTAC reed or electronic switches. You must choose the SDAD100X35S variant for magnetic sensing, or mount external mechanical limits to detect the rod ends.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SDAD Cylinders
Request a Quote for Airtac SDAD Double Rod Slim Cylinder SDAD100X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.