AirTAC GAL200 Air Lubricator, 1/8"-1/4" Port
Every stocked AirTAC GAL200 configuration on one page: 12 order codes with 1/8"-1/4" ports, from $21.16. Pick the port, bowl and configuration to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GAL200
The AirTAC GAL200 is a GA-series air line lubricator. It has 1/8", 1/4" ports (PT thread as standard). Operating pressure is 0.05 – 0.9 MPa (7 – 130 psi).
The drip unit is diaphragm-sealed, so the oil feed stays stable; one turn of the adjusting ring covers the whole range and the feed changes almost linearly with it. The drip design keeps the pressure loss low, and oil can be topped up without shutting off the air. Proof pressure 1.5 MPa (215 psi), temperature -5 to +70 °C (no freezing).
GAL200 Technical Specifications
| Model | GAL200 |
|---|---|
| Port | 1/8" (06), 1/4" (08) |
| Thread | PT (standard) |
| Lubricator capacity | 36 cc |
| Weight | 200 g |
| Fluid | Air |
|---|---|
| Operating pressure | 0.05 – 0.9 MPa (7 – 130 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Recommended oil | ISO VG32 turbine oil |
Source: AirTAC Products Catalog 2026A (p.232, PDF01-P0234), GAL ordering code and specifications.
How the GAL200 Order Code Is Built
| GAL200 | Series and body size |
|---|---|
| C / N | Bowl: C = metal, N = nylon, blank = PC |
| 06 / 08 | Port: 06 = 1/8", 08 = 1/4" |
| J | Without bracket (blank = bracket included) |
| G / T | Thread: G = G, T = NPT, blank = PT |
All AirTAC GAL200 Order Codes (12)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Port | Bowl | Configuration | Price | Select |
|---|---|---|---|---|---|
| GAL20006 | 1/8" (06) | PC bowl | With bracket · PT thread | $22.09 | |
| GAL20006J | 1/8" (06) | PC bowl | No bracket (J) · PT thread | $21.16 | |
| GAL200C06 | 1/8" (06) | Metal bowl (C) | With bracket · PT thread | $25.55 | |
| GAL200C06J | 1/8" (06) | Metal bowl (C) | No bracket (J) · PT thread | $24.62 | |
| GAL200N06 | 1/8" (06) | Nylon bowl (N) | With bracket · PT thread | $25.55 | |
| GAL200N06J | 1/8" (06) | Nylon bowl (N) | No bracket (J) · PT thread | $24.62 | |
| GAL20008 | 1/4" (08) | PC bowl | With bracket · PT thread | $22.09 | |
| GAL20008J | 1/4" (08) | PC bowl | No bracket (J) · PT thread | $21.16 | |
| GAL200C08 | 1/4" (08) | Metal bowl (C) | With bracket · PT thread | $25.55 | |
| GAL200C08J | 1/4" (08) | Metal bowl (C) | No bracket (J) · PT thread | $24.62 | |
| GAL200N08 | 1/4" (08) | Nylon bowl (N) | With bracket · PT thread | $25.55 | |
| GAL200N08J | 1/4" (08) | Nylon bowl (N) | No bracket (J) · PT thread | $24.62 |
Need a combination that is not listed? Request a quote.
Where the GAL200 Is Used
Lubricated actuators
Adds a fine oil mist for tools and cylinders that need it.
End of an FRL set
Fits after a GAF filter and GAR regulator.
Air tools
Lubricated air for pneumatic tools and motors.
Choosing the Right GAL200 Configuration
Start with the port size of your air line: 1/8" (06), 1/4" (08).
Then the bowl and drain: PC is standard, C is metal and N is nylon.
Finally the configuration. A mounting bracket is included unless the code carries J.
AirTAC GAL200 FAQ
1/8" (06), 1/4" (08); PT thread as standard.
PC is the standard clear bowl; C (metal) suits areas with solvents or impact risk; N is nylon. The standard drain is differential + manual; A drains automatically.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the GAL200 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the GAL200
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.