AirTAC TACED100 Double-Rod Guided Compact Cylinder, 100 mm Bore
Every AirTAC TACED100 configuration on one page: 34 stock order codes with strokes from 5 to 100 mm and 1 mounting, from $154.78. Pick a stroke, mounting and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC TACED100
The AirTAC TACED100 is a double-rod, double-acting compact cylinder with a 100 mm bore and a 20 mm piston rod. The rod runs through both end covers, so push and pull are equal: 3770 N at 0.5 MPa and 5278 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output. AirTAC builds the TACED100 as the guide-rod version of the ACE compact cylinder (double-rod, double-acting with guide rods); its order codes have no rod-end thread option.
All TACED100 versions share 1/8" air ports and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 34 stock order codes with strokes from 5 to 100 mm; the catalog maximum stroke is 100 mm.
TACED100 Technical Specifications
| Bore size | Ø100 mm |
|---|---|
| Stock strokes | 5 – 100 mm |
| Catalog maximum stroke | 100 mm (longer on request) |
| Acting type | Double acting, double rod, with guide rods |
| Port size | 1/8" (PT standard) |
| Piston rod | Ø20 mm |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0469), ACE series (TACED) ordering code and specifications.
Theoretical output force (Ø100 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 3770 N | 3770 N |
| 0.7 MPa | 5278 N | 5278 N |
Both directions act on the bore area minus the Ø20 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the TACED100 Order Code Is Built
| TACED100 | Series and bore (100 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| FB | Mounting: FB rear flange (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC TACED100 Order Codes (34)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| TACED100X5 | 5 mm | Basic (no mounting) | - · PT | $154.78 | |
| TACED100X5S | 5 mm | Basic (no mounting) | S · PT | $158.07 | |
| TACED100X10 | 10 mm | Basic (no mounting) | - · PT | $156.52 | |
| TACED100X10S | 10 mm | Basic (no mounting) | S · PT | $159.82 | |
| TACED100X15 | 15 mm | Basic (no mounting) | - · PT | $158.07 | |
| TACED100X15S | 15 mm | Basic (no mounting) | S · PT | $161.32 | |
| TACED100X20 | 20 mm | Basic (no mounting) | - · PT | $159.82 | |
| TACED100X20S | 20 mm | Basic (no mounting) | S · PT | $163.06 | |
| TACED100X25 | 25 mm | Basic (no mounting) | - · PT | $161.56 | |
| TACED100X25S | 25 mm | Basic (no mounting) | S · PT | $164.80 | |
| TACED100X30 | 30 mm | Basic (no mounting) | - · PT | $163.30 | |
| TACED100X30S | 30 mm | Basic (no mounting) | S · PT | $166.54 | |
| TACED100X35 | 35 mm | Basic (no mounting) | - · PT | $165.04 | |
| TACED100X35S | 35 mm | Basic (no mounting) | S · PT | $168.29 | |
| TACED100X40 | 40 mm | Basic (no mounting) | - · PT | $166.54 | |
| TACED100X40S | 40 mm | Basic (no mounting) | S · PT | $169.84 | |
| TACED100X45 | 45 mm | Basic (no mounting) | - · PT | $168.29 | |
| TACED100X45S | 45 mm | Basic (no mounting) | S · PT | $171.58 | |
| TACED100X50 | 50 mm | Basic (no mounting) | - · PT | $170.03 | |
| TACED100X50S | 50 mm | Basic (no mounting) | S · PT | $173.32 | |
| TACED100X55 | 55 mm | Basic (no mounting) | - · PT | $171.78 | |
| TACED100X55S | 55 mm | Basic (no mounting) | S · PT | $175.07 | |
| TACED100X60 | 60 mm | Basic (no mounting) | - · PT | $173.52 | |
| TACED100X60S | 60 mm | Basic (no mounting) | S · PT | $176.81 | |
| TACED100X70 | 70 mm | Basic (no mounting) | - · PT | $176.81 | |
| TACED100X70S | 70 mm | Basic (no mounting) | S · PT | $180.06 | |
| TACED100X75 | 75 mm | Basic (no mounting) | - · PT | $178.56 | |
| TACED100X75S | 75 mm | Basic (no mounting) | S · PT | $181.80 | |
| TACED100X80 | 80 mm | Basic (no mounting) | - · PT | $180.30 | |
| TACED100X80S | 80 mm | Basic (no mounting) | S · PT | $183.55 | |
| TACED100X90 | 90 mm | Basic (no mounting) | - · PT | $183.55 | |
| TACED100X90S | 90 mm | Basic (no mounting) | S · PT | $186.84 | |
| TACED100X100 | 100 mm | Basic (no mounting) | - · PT | $187.03 | |
| TACED100X100S | 100 mm | Basic (no mounting) | S · PT | $190.33 |
Need a combination that is not listed? Request a quote.
Where the TACED100 Is Used
Heavy pushing and lifting
About 3770 N at 0.5 MPa moves heavy slides, lifts gates and ejects parts.
Clamping and pressing
Rigid mountings for press-fit, riveting and heavy clamping.
Pivoting mechanisms
Clevis and trunnion versions drive levers, dampers and tilting tables.
Choosing the Right TACED100 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors.
AirTAC TACED100 FAQ
No. Every TACED100 gives about 3770 N in both directions at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
Basic mounting only. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single TACED100. Orders are processed and handed to the carrier within 3-5 business days.
Buying the TACED100 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the TACED100
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.