AirTAC MTA40 Single-Acting Pull Mini Cylinder, 40 mm Bore
Every AirTAC MTA40 configuration on one page: 33 stock order codes with strokes from 5 to 100 mm and 3 cover/mounting combinations, from $51.14. Pick a stroke, cover and mounting and version to see the exact order code and price.
S · PT
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MTA40
The AirTAC MTA40 is a single-acting, spring-return stainless-steel mini cylinder (pull type) with a 40 mm bore and a 16 mm piston rod. Compressed air retracts the rod and a built-in spring extends it when the air is released, so the rod rests extended; only one port takes air. Catalog output with the spring force already deducted is 339.1 N pull at 0.5 MPa and 550.1 N at 0.7 MPa. The spring stroke has no air behind it, so it must not carry a load.
All MTA40 versions share 1/8" air ports, an M12×1.25 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.2 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 50 to 800 mm/s. This page lists 33 stock order codes with strokes from 5 to 100 mm; the catalog maximum stroke is 100 mm.
MTA40 Technical Specifications
| Bore size | Ø40 mm |
|---|---|
| Stock strokes | 5 – 100 mm |
| Catalog maximum stroke | 100 mm (longer on request) |
| Acting type | Single acting, spring return (pull) |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø16 mm / M12×1.25 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0455), MA series (MTA) ordering code and specifications.
Catalog output force (Ø40 mm)
| Pressure | Pull (spring deducted) |
|---|---|
| 0.5 MPa | 339.1 N |
| 0.7 MPa | 550.1 N |
AirTAC catalog values for the single-acting pull type: air force on the bore minus the Ø16 mm rod less the return-spring force. The spring stroke delivers no rated force.
How the MTA40 Order Code Is Built
| MTA40 | Series and bore (40 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| CA / CM / U | Back cover: CA clevis-end cover; CM round-end cover; U flat-end cover |
| FA / LB / SDB | Mounting: FA front flange; LB foot bracket; SDB rear pivot bracket (blank = none) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC MTA40 Order Codes (33)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Back cover · Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| MTA40X5SCA | 5 mm | CA clevis-end cover | S · PT | $51.14 | |
| MTA40X10SCA | 10 mm | CA clevis-end cover | S · PT | $51.14 | |
| MTA40X10SCM | 10 mm | CM round-end cover | S · PT | $51.14 | |
| MTA40X15SCA | 15 mm | CA clevis-end cover | S · PT | $51.14 | |
| MTA40X15SCM | 15 mm | CM round-end cover | S · PT | $51.14 | |
| MTA40X15SU | 15 mm | U flat-end cover | S · PT | $51.14 | |
| MTA40X20SCA | 20 mm | CA clevis-end cover | S · PT | $51.14 | |
| MTA40X20SCM | 20 mm | CM round-end cover | S · PT | $51.14 | |
| MTA40X20SU | 20 mm | U flat-end cover | S · PT | $51.14 | |
| MTA40X25SCA | 25 mm | CA clevis-end cover | S · PT | $51.14 | |
| MTA40X25SCM | 25 mm | CM round-end cover | S · PT | $51.14 | |
| MTA40X25SU | 25 mm | U flat-end cover | S · PT | $51.14 | |
| MTA40X30SCA | 30 mm | CA clevis-end cover | S · PT | $54.40 | |
| MTA40X30SCM | 30 mm | CM round-end cover | S · PT | $54.40 | |
| MTA40X30SU | 30 mm | U flat-end cover | S · PT | $54.40 | |
| MTA40X40SCA | 40 mm | CA clevis-end cover | S · PT | $54.40 | |
| MTA40X40SCM | 40 mm | CM round-end cover | S · PT | $54.40 | |
| MTA40X40SU | 40 mm | U flat-end cover | S · PT | $54.40 | |
| MTA40X50SCA | 50 mm | CA clevis-end cover | S · PT | $54.40 | |
| MTA40X50SCM | 50 mm | CM round-end cover | S · PT | $54.40 | |
| MTA40X50SU | 50 mm | U flat-end cover | S · PT | $54.40 | |
| MTA40X60SCA | 60 mm | CA clevis-end cover | S · PT | $57.45 | |
| MTA40X60SCM | 60 mm | CM round-end cover | S · PT | $57.45 | |
| MTA40X60SU | 60 mm | U flat-end cover | S · PT | $57.45 | |
| MTA40X75SCA | 75 mm | CA clevis-end cover | S · PT | $57.45 | |
| MTA40X75SCM | 75 mm | CM round-end cover | S · PT | $57.45 | |
| MTA40X75SU | 75 mm | U flat-end cover | S · PT | $57.45 | |
| MTA40X80SCA | 80 mm | CA clevis-end cover | S · PT | $60.45 | |
| MTA40X80SCM | 80 mm | CM round-end cover | S · PT | $60.45 | |
| MTA40X80SU | 80 mm | U flat-end cover | S · PT | $60.45 | |
| MTA40X100SCA | 100 mm | CA clevis-end cover | S · PT | $60.45 | |
| MTA40X100SCM | 100 mm | CM round-end cover | S · PT | $60.45 | |
| MTA40X100SU | 100 mm | U flat-end cover | S · PT | $60.45 |
Need a combination that is not listed? Request a quote.
Where the MTA40 Is Used
General automation
About 339.1 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right MTA40 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the back cover and mounting. The back cover sets how the rear of the cylinder is fixed or where its air enters (CA clevis-end cover, CM round-end cover, U flat-end cover). A clevis-end cover with an SDB pivot bracket lets the cylinder swing; flat or round covers with an FA flange or LB foot hold it rigid.
Finally pick the version: S adds a magnet for position sensors.
AirTAC MTA40 FAQ
Air retracts the rod with about 339.1 N at 0.5 MPa (catalog value, spring force deducted); the internal spring extends it when the port is vented. The force does not depend on the stroke code.
No. The return stroke is driven only by the internal spring, and AirTAC specifies that single-acting cylinders must not be loaded on it. Use a double-acting model if both directions must do work.
1/8" ports, PT thread as standard.
Back covers: CA clevis-end cover, CM round-end cover, U flat-end cover. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.2 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single MTA40. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MTA40 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the MTA40
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.