AirTAC MFD20 Double-Rod Mini Cylinder, 20 mm Bore
Every AirTAC MFD20 configuration on one page: 39 stock order codes with strokes from 10 to 450 mm and 1 mounting, from $35.59. Pick a stroke, mounting and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MFD20
The AirTAC MFD20 is a double-rod, double-acting stainless-steel mini cylinder with a 20 mm bore and an 8 mm piston rod. The rod runs through both end covers, so push and pull are equal: 132 N at 0.5 MPa and 185 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All MFD20 versions share 1/8" air ports, an M8×1.25 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 39 stock order codes with strokes from 10 to 450 mm; the catalog maximum stroke is 300 mm, and the longer codes are non-standard strokes we already supply.
MFD20 Technical Specifications
| Bore size | Ø20 mm |
|---|---|
| Stock strokes | 10 – 450 mm |
| Catalog maximum stroke | 300 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø8 mm / M8×1.25 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0443), MF series (MFD) ordering code and specifications.
Theoretical output force (Ø20 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 132 N | 132 N |
| 0.7 MPa | 185 N | 185 N |
Both directions act on the bore area minus the Ø8 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the MFD20 Order Code Is Built
| MFD20 | Series and bore (20 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| FA / LB / TC | Mounting: FA front flange; LB foot bracket; TC center trunnion (blank = none) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC MFD20 Order Codes (39)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| MFD20X10S | 10 mm | Basic (no mounting) | S · PT | $37.34 | |
| MFD20X15 | 15 mm | Basic (no mounting) | - · PT | $35.59 | |
| MFD20X15S | 15 mm | Basic (no mounting) | S · PT | $37.34 | |
| MFD20X20S | 20 mm | Basic (no mounting) | S · PT | $37.34 | |
| MFD20X25 | 25 mm | Basic (no mounting) | - · PT | $35.59 | |
| MFD20X25S | 25 mm | Basic (no mounting) | S · PT | $37.34 | |
| MFD20X30 | 30 mm | Basic (no mounting) | - · PT | $37.09 | |
| MFD20X30S | 30 mm | Basic (no mounting) | S · PT | $38.84 | |
| MFD20X40 | 40 mm | Basic (no mounting) | - · PT | $37.09 | |
| MFD20X40S | 40 mm | Basic (no mounting) | S · PT | $38.84 | |
| MFD20X50 | 50 mm | Basic (no mounting) | - · PT | $37.09 | |
| MFD20X50S | 50 mm | Basic (no mounting) | S · PT | $38.84 | |
| MFD20X60 | 60 mm | Basic (no mounting) | - · PT | $38.65 | |
| MFD20X65S | 65 mm | Basic (no mounting) | S · PT | $40.39 | |
| MFD20X75 | 75 mm | Basic (no mounting) | - · PT | $38.65 | |
| MFD20X75S | 75 mm | Basic (no mounting) | S · PT | $40.39 | |
| MFD20X80 | 80 mm | Basic (no mounting) | - · PT | $39.95 | |
| MFD20X80S | 80 mm | Basic (no mounting) | S · PT | $41.70 | |
| MFD20X100 | 100 mm | Basic (no mounting) | - · PT | $39.95 | |
| MFD20X100S | 100 mm | Basic (no mounting) | S · PT | $41.70 | |
| MFD20X120 | 120 mm | Basic (no mounting) | - · PT | $41.70 | |
| MFD20X125 | 125 mm | Basic (no mounting) | - · PT | $41.70 | |
| MFD20X125S | 125 mm | Basic (no mounting) | S · PT | $43.44 | |
| MFD20X130S | 130 mm | Basic (no mounting) | S · PT | $45.19 | |
| MFD20X150 | 150 mm | Basic (no mounting) | - · PT | $43.44 | |
| MFD20X150S | 150 mm | Basic (no mounting) | S · PT | $45.19 | |
| MFD20X160 | 160 mm | Basic (no mounting) | - · PT | $45.19 | |
| MFD20X160S | 160 mm | Basic (no mounting) | S · PT | $46.93 | |
| MFD20X175 | 175 mm | Basic (no mounting) | - · PT | $45.19 | |
| MFD20X175S | 175 mm | Basic (no mounting) | S · PT | $46.93 | |
| MFD20X200 | 200 mm | Basic (no mounting) | - · PT | $46.93 | |
| MFD20X200S | 200 mm | Basic (no mounting) | S · PT | $48.67 | |
| MFD20X225 | 225 mm | Basic (no mounting) | - · PT | $48.23 | |
| MFD20X225S | 225 mm | Basic (no mounting) | S · PT | $49.98 | |
| MFD20X250 | 250 mm | Basic (no mounting) | - · PT | $49.98 | |
| MFD20X250S | 250 mm | Basic (no mounting) | S · PT | $51.72 | |
| MFD20X300 | 300 mm | Basic (no mounting) | - · PT | $53.66 | |
| MFD20X300S | 300 mm | Basic (no mounting) | S · PT | $55.40 | |
| MFD20X450S | 450 mm | Basic (no mounting) | S · PT | $66.30 |
Need a combination that is not listed? Request a quote.
Where the MFD20 Is Used
Small pushers and stoppers
About 132 N at 0.5 MPa suits light pushers, stoppers, gates and ejectors.
Packaging and assembly
Compact strokes for feeders, diverters and assembly stations.
Sensed positioning
Magnet versions report stroke ends to the PLC through cylinder sensors.
Choosing the Right MFD20 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors.
AirTAC MFD20 FAQ
No. Every MFD20 gives about 132 N in both directions at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
Basic mounting only. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single MFD20. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MFD20 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the MFD20
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.