AirTAC MTF25 Single-Acting Pull Mini Cylinder, 25 mm Bore
Every AirTAC MTF25 configuration on one page: 65 stock order codes with strokes from 10 to 150 mm and 4 cover/mounting combinations, from $34.29. Pick a stroke, cover and mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MTF25
The AirTAC MTF25 is a single-acting, spring-return stainless-steel mini cylinder (pull type) with a 25 mm bore and a 10 mm piston rod. Compressed air retracts the rod and a built-in spring extends it when the air is released, so the rod rests extended; only one port takes air. Catalog output with the spring force already deducted is 153.6 N pull at 0.5 MPa and 236.0 N at 0.7 MPa. The spring stroke has no air behind it, so it must not carry a load.
All MTF25 versions share 1/8" air ports, an M10×1.25 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.2 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 50 to 800 mm/s. This page lists 65 stock order codes with strokes from 10 to 150 mm; the catalog maximum stroke is 150 mm.
MTF25 Technical Specifications
| Bore size | Ø25 mm |
|---|---|
| Stock strokes | 10 – 150 mm |
| Catalog maximum stroke | 150 mm (longer on request) |
| Acting type | Single acting, spring return (pull) |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø10 mm / M10×1.25 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0443), MF series (MTF) ordering code and specifications.
Catalog output force (Ø25 mm)
| Pressure | Pull (spring deducted) |
|---|---|
| 0.5 MPa | 153.6 N |
| 0.7 MPa | 236.0 N |
AirTAC catalog values for the single-acting pull type: air force on the bore minus the Ø10 mm rod less the return-spring force. The spring stroke delivers no rated force.
How the MTF25 Order Code Is Built
| MTF25 | Series and bore (25 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| CA / CM / U | Back cover: CA clevis-end cover; CM round-end cover; U flat-end cover |
| FA / LB / SDB / TC | Mounting: FA front flange; LB foot bracket; SDB rear pivot bracket; TC center trunnion (blank = none) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC MTF25 Order Codes (65)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Back cover · Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| MTF25X10CA | 10 mm | CA clevis-end cover | - · PT | $34.29 | |
| MTF25X10SCA | 10 mm | CA clevis-end cover | S · PT | $36.03 | |
| MTF25X10CM | 10 mm | CM round-end cover | - · PT | $34.29 | |
| MTF25X10SCM | 10 mm | CM round-end cover | S · PT | $36.03 | |
| MTF25X10U | 10 mm | U flat-end cover | - · PT | $34.29 | |
| MTF25X10SU | 10 mm | U flat-end cover | S · PT | $36.03 | |
| MTF25X15SCA | 15 mm | CA clevis-end cover | S · PT | $36.03 | |
| MTF25X15CM | 15 mm | CM round-end cover | - · PT | $34.29 | |
| MTF25X15SCM | 15 mm | CM round-end cover | S · PT | $36.03 | |
| MTF25X15U | 15 mm | U flat-end cover | - · PT | $34.29 | |
| MTF25X15SU | 15 mm | U flat-end cover | S · PT | $36.03 | |
| MTF25X20CA | 20 mm | CA clevis-end cover | - · PT | $34.29 | |
| MTF25X20SCA | 20 mm | CA clevis-end cover | S · PT | $36.03 | |
| MTF25X20CM | 20 mm | CM round-end cover | - · PT | $34.29 | |
| MTF25X20SCM | 20 mm | CM round-end cover | S · PT | $36.03 | |
| MTF25X20U | 20 mm | U flat-end cover | - · PT | $34.29 | |
| MTF25X25CA | 25 mm | CA clevis-end cover | - · PT | $34.29 | |
| MTF25X25SCA | 25 mm | CA clevis-end cover | S · PT | $36.03 | |
| MTF25X25SCM | 25 mm | CM round-end cover | S · PT | $36.03 | |
| MTF25X25SU | 25 mm | U flat-end cover | S · PT | $36.03 | |
| MTF25X25SUTC | 25 mm | U flat-end cover + TC center trunnion | S · PT | $45.81 | |
| MTF25X30CA | 30 mm | CA clevis-end cover | - · PT | $36.22 | |
| MTF25X30SCA | 30 mm | CA clevis-end cover | S · PT | $37.97 | |
| MTF25X30CM | 30 mm | CM round-end cover | - · PT | $36.22 | |
| MTF25X30SCM | 30 mm | CM round-end cover | S · PT | $37.97 | |
| MTF25X30U | 30 mm | U flat-end cover | - · PT | $36.22 | |
| MTF25X30SU | 30 mm | U flat-end cover | S · PT | $37.97 | |
| MTF25X40CA | 40 mm | CA clevis-end cover | - · PT | $36.22 | |
| MTF25X40SCA | 40 mm | CA clevis-end cover | S · PT | $37.97 | |
| MTF25X40CM | 40 mm | CM round-end cover | - · PT | $36.22 | |
| MTF25X40SCM | 40 mm | CM round-end cover | S · PT | $37.97 | |
| MTF25X40U | 40 mm | U flat-end cover | - · PT | $36.22 | |
| MTF25X40SU | 40 mm | U flat-end cover | S · PT | $37.97 | |
| MTF25X50CA | 50 mm | CA clevis-end cover | - · PT | $36.22 | |
| MTF25X50SCA | 50 mm | CA clevis-end cover | S · PT | $37.97 | |
| MTF25X50CM | 50 mm | CM round-end cover | - · PT | $36.22 | |
| MTF25X50SCM | 50 mm | CM round-end cover | S · PT | $37.97 | |
| MTF25X50U | 50 mm | U flat-end cover | - · PT | $36.22 | |
| MTF25X50SU | 50 mm | U flat-end cover | S · PT | $37.97 | |
| MTF25X60CA | 60 mm | CA clevis-end cover | - · PT | $37.78 | |
| MTF25X60CM | 60 mm | CM round-end cover | - · PT | $37.78 | |
| MTF25X60SCM | 60 mm | CM round-end cover | S · PT | $39.52 | |
| MTF25X60U | 60 mm | U flat-end cover | - · PT | $37.78 | |
| MTF25X75SCA | 75 mm | CA clevis-end cover | S · PT | $39.52 | |
| MTF25X75SCM | 75 mm | CM round-end cover | S · PT | $39.52 | |
| MTF25X75SU | 75 mm | U flat-end cover | S · PT | $39.52 | |
| MTF25X80CA | 80 mm | CA clevis-end cover | - · PT | $39.52 | |
| MTF25X80SCA | 80 mm | CA clevis-end cover | S · PT | $41.26 | |
| MTF25X80CM | 80 mm | CM round-end cover | - · PT | $39.52 | |
| MTF25X80SCM | 80 mm | CM round-end cover | S · PT | $41.26 | |
| MTF25X80U | 80 mm | U flat-end cover | - · PT | $39.52 | |
| MTF25X80SU | 80 mm | U flat-end cover | S · PT | $41.26 | |
| MTF25X100CA | 100 mm | CA clevis-end cover | - · PT | $39.52 | |
| MTF25X100SCA | 100 mm | CA clevis-end cover | S · PT | $41.26 | |
| MTF25X100CM | 100 mm | CM round-end cover | - · PT | $39.52 | |
| MTF25X100SCM | 100 mm | CM round-end cover | S · PT | $41.26 | |
| MTF25X100U | 100 mm | U flat-end cover | - · PT | $39.52 | |
| MTF25X100SU | 100 mm | U flat-end cover | S · PT | $41.26 | |
| MTF25X125SCA | 125 mm | CA clevis-end cover | S · PT | $43.87 | |
| MTF25X150CA | 150 mm | CA clevis-end cover | - · PT | $44.07 | |
| MTF25X150SCA | 150 mm | CA clevis-end cover | S · PT | $45.81 | |
| MTF25X150CM | 150 mm | CM round-end cover | - · PT | $44.07 | |
| MTF25X150SCM | 150 mm | CM round-end cover | S · PT | $45.81 | |
| MTF25X150U | 150 mm | U flat-end cover | - · PT | $44.07 | |
| MTF25X150SU | 150 mm | U flat-end cover | S · PT | $45.81 |
Need a combination that is not listed? Request a quote.
Where the MTF25 Is Used
Small pushers and stoppers
About 153.6 N at 0.5 MPa suits light pushers, stoppers, gates and ejectors.
Packaging and assembly
Compact strokes for feeders, diverters and assembly stations.
Sensed positioning
Magnet versions report stroke ends to the PLC through cylinder sensors.
Choosing the Right MTF25 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the back cover and mounting. The back cover sets how the rear of the cylinder is fixed or where its air enters (CA clevis-end cover, CM round-end cover, U flat-end cover). Mounting brackets on this page: TC center trunnion. A clevis-end cover with an SDB bracket or a TC trunnion lets the cylinder swing; an FA flange or LB foot holds it rigid.
Finally pick the version: S adds a magnet for position sensors.
AirTAC MTF25 FAQ
Air retracts the rod with about 153.6 N at 0.5 MPa (catalog value, spring force deducted); the internal spring extends it when the port is vented. The force does not depend on the stroke code.
No. The return stroke is driven only by the internal spring, and AirTAC specifies that single-acting cylinders must not be loaded on it. Use a double-acting model if both directions must do work.
1/8" ports, PT thread as standard.
Back covers: CA clevis-end cover, CM round-end cover, U flat-end cover. Brackets: TC center trunnion. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.2 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single MTF25. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MTF25 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the MTF25
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.