Airtac MTF Mini Cylinder MTF25X60SCM
The AirTAC Airtac MTF Mini Cylinder MTF25X60SCM is a genuine single acting, pull (spring return) JIS-standard round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeSingle acting, pull (spring return)
- Rod threadM10×1.25
- CushionFixed TPU bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MTF Mini Cylinder MTF25X60SCM
Generating 153.6 N of pull at 0.5 MPa, this JIS-standard round-body mini cylinder uses a spring to extend the rod and compressed air through its 1/8 inch port to retract it. Because the internal spring constantly pushes outward, the MTF25X60SCM fails safely to the extended position upon air loss, making it optimal for spring-open and air-close operations. The SUS304 stainless steel barrel and riveted aluminium covers resist mild washdown corrosion while maintaining a shorter overall body than an ISO 6432 unit of identical bore and stroke.
The quoted 153.6 N pull force is already net of the spring resistance, yielding a safe working load of about 92 N or a 7.8 kg vertical lift capacity with a 2:1 margin. This specific configuration includes a CM round-end rear cover and a built-in piston magnet, enabling direct mounting of CMSG, DMSG, or EMSG switches for position sensing. End-of-stroke deceleration is handled by fixed TPU bumper pads rather than an adjustable air cushion.
Airtac MTF Mini Cylinder MTF25X60SCM Technical Specifications
| Model | Airtac MTF Mini Cylinder MTF25X60SCM |
|---|---|
| Series | MTF JIS mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Single acting, pull (spring return) |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 50 – 800 mm/s |
| Cushion | Fixed TPU bumper pads |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø25mm)
| Pressure | Pull force (spring return) |
|---|---|
| 0.5 MPa | 153.6 N |
| 0.7 MPa | 236.0 N |
Single-acting pull: the spring extends the rod; air retracts it. Forces already net the spring; minimum working pressure is 0.2 MPa.
Model Code: Airtac MTF Mini Cylinder MTF25X60SCM
| MTF | JIS-standard round-body mini cylinder (single-acting pull, spring-return). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MTF Mini Cylinder MTF25X60SCM Is Used
Tensioning Systems
Pulls web materials or cables with a 92 N safe working load, releasing tension automatically when air pressure drops.
Fail-Safe Hatches
Holds doors or gates closed via air retraction, allowing the internal spring to force them open during an air loss event.
Rejecter Arms
Retracts a diverter pin using 153.6 N of force to push products off a line, relying on the spring to reset the arm outward.
Is the Airtac MTF Mini Cylinder MTF25X60SCM the Right Cylinder?
When sizing this 25 mm bore unit against alternatives, step down to the MTF20 for 93.4 N of pull at 0.5 MPa, or step up to the MTF32 for 266.8 N if the load requires greater retraction force. A minimum operating pressure of 0.2 MPa is required to overcome the internal spring and initiate the pull stroke, with a maximum limit of 1.0 MPa. Choose this single-acting pull configuration for tensioning or return-to-extended fail-safe tasks, and utilize the compatible LB foot, FA flange, or TC trunnion mounts to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.2 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MTF Mini Cylinder MTF25X60SCM FAQ
It provides a net pull force of 153.6 N at 0.5 MPa and 236 N at 0.7 MPa. The cylinder requires a minimum of 0.2 MPa to overcome the return spring and accepts a maximum operating pressure of 1.0 MPa.
The internal spring constantly extends the rod, meaning compressed air is only used to pull it in. If air pressure is lost, the spring drives the rod back out to the fully extended position, so it cannot hold a mid-stroke load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MTF Mini Cylinder MTF25X60SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.