AirTAC ESV330P ISO 5599-1 5/3-way Solenoid Valve, Pressure Center
Every stocked AirTAC ESV330P configuration on one page: 10 order codes covering 5 coil voltages, from $125.59. Pick the voltage, electrical entry to see the exact order code and price.
Internal pilot
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC ESV330P
The AirTAC ESV330P is a 5/3-way solenoid valve with an ISO 5599-1 mounting face (pressure center): with both coils off both cylinder ports are pressurised. It mounts on an ESV300 single or manifold base, which carries the PT3/8 working ports; the base is ordered separately. It is internally piloted as standard, and the W version takes its pilot air from a separate supply. On the 200, 300 and 400 series the pilot can be changed between internal and external by refitting the pilot seal.
The effective area is 42 mm² (Cv 2.32) and the switching time at 0.5 MPa is 50 / 62 ms (on / off). Internally piloted it works from 0.2 to 1.0 MPa; externally piloted from 0 to 1.0 MPa with 0.2-1.0 MPa pilot pressure. It needs no lubrication, and the coil is rated IP65 with class B insulation.
ESV330P Technical Specifications
| Model | ESV330P |
|---|---|
| Function | 5/3-way, pressure center |
| Mounting | ISO 5599-1 base |
| Effective area | 42 mm² (Cv 2.32) |
| Base / end-plate port | PT3/8 / PT1/2 |
| Switching time (0.5 MPa) | 50 / 62 ms on / off |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Pilot | Internal or external (W) |
| Pressure, internal pilot | 0.2 – 1.0 MPa (29 – 145 psi) |
| Pressure, external pilot | 0 – 1.0 MPa |
| Pilot pressure | 0.2 – 1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Coil power | AC220V / AC110V 4.5 VA · AC24V 5.0 VA · DC24V 3.0 W · DC12V 2.5 W |
| Voltage tolerance | AC ±15%, DC ±10% |
| Protection / insulation | IP65 / class B |
Source: AirTAC Products Catalog 2026A (PDF01-P0094..P0096), ESV200/300/400/600 series specifications and ordering code. Lubrication is not required.
How the ESV330P Order Code Is Built
| ESV | ISO 5599-1 solenoid valve |
|---|---|
| 3 | Series: 300 |
| 30P | 10 single solenoid, 20 double solenoid, 30C/30E/30P 5/3 closed/exhaust/pressure center |
| A / B / C / E / F | Voltage: A AC220V, B DC24V, C AC110V, E AC24V, F DC12V |
| I | Lead wire 0.5 m (blank = DIN connector) |
| W | External pilot (blank = internal) |
All AirTAC ESV330P Order Codes (10)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Voltage | Entry | Pilot | Price | Select |
|---|---|---|---|---|---|
| ESV330PB | DC24V (B) | DIN connector | Internal pilot | $125.59 | |
| ESV330PBI | DC24V (B) | Lead wire 0.5 m (I) | Internal pilot | $125.59 | |
| ESV330PA | AC220V (A) | DIN connector | Internal pilot | $125.59 | |
| ESV330PAI | AC220V (A) | Lead wire 0.5 m (I) | Internal pilot | $125.59 | |
| ESV330PC | AC110V (C) | DIN connector | Internal pilot | $125.59 | |
| ESV330PCI | AC110V (C) | Lead wire 0.5 m (I) | Internal pilot | $125.59 | |
| ESV330PE | AC24V (E) | DIN connector | Internal pilot | $125.59 | |
| ESV330PEI | AC24V (E) | Lead wire 0.5 m (I) | Internal pilot | $125.59 | |
| ESV330PF | DC12V (F) | DIN connector | Internal pilot | $125.59 | |
| ESV330PFI | DC12V (F) | Lead wire 0.5 m (I) | Internal pilot | $125.59 |
Need a combination that is not listed? Request a quote.
Where the ESV330P Is Used
Large cylinders
Cv 2.32 drives large-bore cylinders at speed.
ISO valve islands
Manifold bases stack to any number of stations, with interchangeable ISO 5599-1 valves.
Replacement of ISO valves
The standard mounting face takes the place of other ISO 5599-1 valves of the same size.
Choosing the Right ESV330P Configuration
Choose the coil voltage to match your control circuit: DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). Supply tolerance is AC ±15% and DC ±10%.
For the electrical entry, the standard DIN connector takes your own cable; the I version has a 0.5 m lead wire already attached.
Internal pilot (no code) needs at least 0.2 MPa supply; choose external pilot (W) with a separate 0.2-1.0 MPa pilot line when the working pressure may be lower, down to 0 MPa.
Then order the base: ESV301M single base, or ESV302M manifold bases with an ESV303M end plate set.
AirTAC ESV330P FAQ
With both coils off both cylinder ports are pressurised.
No. Order an ESV301M single base or ESV302M manifold bases with an ESV303M end plate set.
DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). The letter after the function code gives the voltage.
Internal pilot 0.2-1.0 MPa; external pilot (W) 0-1.0 MPa with 0.2-1.0 MPa pilot pressure. Proof pressure 1.5 MPa, -20 to +70 °C, air filtered to 40 µm.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the ESV330P from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the ESV330P
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.