AirTAC LSH25RL Linear Guide Rail, Size 25
Every stocked AirTAC size 25 LSH rail on one page: 11 order codes from $24.41. Pick the length, accuracy and matching code to see the exact order code and price.
E matching code
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC LSH25RL
These are LSH standard linear guide rails, size 25 (23 mm wide), sold without blocks. Rails are fixed with M6 bolts; one-piece rails go up to 4040 mm, and the 4000 mm full-length rail can be cut to size.
The rail uses an X-type (45° / -45°) arc groove with four rows of balls at a 45° contact angle, so the guide self-aligns, takes equal load in four directions and can be preloaded for rigidity. Blocks and rails of the same size are interchangeable. The matching code (D or E) decides which block codes give which preload on this rail.
LSH25RL Technical Specifications
| Size | 25 |
|---|---|
| Rail width | 23 mm |
| Mounting bolt | M6 |
| Max one-piece rail | 4040 mm |
| Stocked lengths | 220 – 4000 mm |
| Accuracy | N normal, H high |
|---|---|
| Matching code | D or E |
Source: AirTAC linear guide catalog (PDF02-P0023 to P0031), LSH series ordering codes, preload pairing table and load ratings.
How the LSH25RL Order Code Is Built
| LSH | LSH standard linear guide |
|---|---|
| B | Black chrome rail (blank = natural) |
| 25 | Size 25 (23 mm rail) |
| RL | Rail |
| X4000 | Rail length in mm |
| -S20 | Rail end to first hole in mm (cut rails) |
| -N / H | Normal / high accuracy |
| -D / E | Rail matching code |
| -T | Bottom-mount rail (blank = top-mount) |
All AirTAC LSH25RL Order Codes (11)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Length | Accuracy | Matching code | Price | Select |
|---|---|---|---|---|---|
| LSH25RLX220-S20-N-E | 220 mm rail, S20 | Normal accuracy (N) | E matching code | $24.41 | |
| LSH25RLX460-S20-H-E | 460 mm rail, S20 | High accuracy (H) | E matching code | $51.61 | |
| LSH25RLX530-S25-N-E | 530 mm rail, S25 | Normal accuracy (N) | E matching code | $55.33 | |
| LSH25RLX580-S20-N-E | 580 mm rail, S20 | Normal accuracy (N) | E matching code | $60.24 | |
| LSH25RLX880-S20-H-E | 880 mm rail, S20 | High accuracy (H) | E matching code | $96.53 | |
| LSH25RLX940-S20-N-E | 940 mm rail, S20 | Normal accuracy (N) | E matching code | $96.27 | |
| LSH25RLX1000-S20-H-E | 1000 mm rail, S20 | High accuracy (H) | E matching code | $109.30 | |
| LSH25RLX1080-S30-H-E | 1080 mm rail, S30 | High accuracy (H) | E matching code | $117.93 | |
| LSH25RLX1780-S20-H-E | 1780 mm rail, S20 | High accuracy (H) | E matching code | $192.85 | |
| LSH25RLX4000-N-E | 4000 mm full-length rail | Normal accuracy (N) | E matching code | $383.82 | |
| LSH25RLX4000-H-E | 4000 mm full-length rail | High accuracy (H) | E matching code | $400.10 |
Need a combination that is not listed? Request a quote.
Where the LSH25RL Is Used
Transfer and handling units
Conveyors, pick-and-place units and small linear slides.
Machine tools
NC lathes, EDM machines, machining centres and tool guides.
Precision stages
XY tables, measuring equipment, semiconductor and robot axes.
Choosing the Right LSH25RL Configuration
Start with the length: a 4000 mm full-length rail to cut yourself, or a cut rail where S is the distance from the rail end to the first mounting hole.
Then pick the accuracy, N (normal) or H (high).
Finally check the matching code. Blocks are paired to D or E rails; the block page lists which block code gives each preload.
AirTAC LSH25RL FAQ
Yes. The full-length rail is meant to be cut to the length you need; pair it with blocks of the matching code.
Yes. Blocks of the same size can be fitted to any LSH rail of that size and keep their smoothness, preload and accuracy, as long as the matching code is right.
Usually yes. Request a quote with the full order code and we will confirm price and lead time.
No. You can order a single LSH25RL item. Orders are processed and handed to the carrier within 3-5 business days.
Buying the LSH25RL from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-30.
Request a Quote for the LSH25RL
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.