AirTAC ACE63 Compact Air Cylinder, 63 mm Bore
Every AirTAC ACE63 configuration on one page: 67 stock order codes with strokes from 5 to 250 mm and 3 mountings, from $52.16. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC ACE63
The AirTAC ACE63 is a double-acting compact cylinder with a 63 mm bore and a 16 mm piston rod. At 0.5 MPa it pushes 1559 N and pulls 1458 N; at 0.7 MPa that rises to 2182 N push and 2041 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All ACE63 versions share 1/8" air ports, an M10×1.5 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 67 stock order codes with strokes from 5 to 250 mm; the catalog maximum stroke is 250 mm.
ACE63 Technical Specifications
| Bore size | Ø63 mm |
|---|---|
| Stock strokes | 5 – 250 mm |
| Catalog maximum stroke | 250 mm (longer on request) |
| Acting type | Double acting |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø16 mm / M10×1.5; male option (B) |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0469), ACE series ordering code and specifications.
Theoretical output force (Ø63 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
Push = pressure × bore area; pull subtracts the Ø16 mm rod area. Usable force is lower because of friction and back-pressure.
How the ACE63 Order Code Is Built
| ACE63 | Series and bore (63 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| B | Male threaded rod end (blank = female) |
| LB / FA / FB / CA / CB / CR / FTC / SDB | Mounting: LB foot; FA front flange; FB rear flange; CA single clevis; CB double clevis; CR rear pin clevis; FTC front trunnion; SDB pivot bracket (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC ACE63 Order Codes (67)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Rod end · Thread | Price | Select |
|---|---|---|---|---|---|
| ACE63X5B | 5 mm | Basic (no mounting) | - · male rod (B) · PT | $52.16 | |
| ACE63X5S | 5 mm | Basic (no mounting) | S · female rod · PT | $54.77 | |
| ACE63X5SB | 5 mm | Basic (no mounting) | S · male rod (B) · PT | $54.77 | |
| ACE63X15B | 15 mm | Basic (no mounting) | - · male rod (B) · PT | $53.66 | |
| ACE63X15S | 15 mm | Basic (no mounting) | S · female rod · PT | $56.27 | |
| ACE63X15SB | 15 mm | Basic (no mounting) | S · male rod (B) · PT | $56.27 | |
| ACE63X15SBFTC | 15 mm | FTC front trunnion | S · male rod (B) · PT | $79.81 | |
| ACE63X20 | 20 mm | Basic (no mounting) | - · female rod · PT | $54.34 | |
| ACE63X20B | 20 mm | Basic (no mounting) | - · male rod (B) · PT | $54.34 | |
| ACE63X20S | 20 mm | Basic (no mounting) | S · female rod · PT | $56.95 | |
| ACE63X20SB | 20 mm | Basic (no mounting) | S · male rod (B) · PT | $56.95 | |
| ACE63X25 | 25 mm | Basic (no mounting) | - · female rod · PT | $55.21 | |
| ACE63X25B | 25 mm | Basic (no mounting) | - · male rod (B) · PT | $55.21 | |
| ACE63X25S | 25 mm | Basic (no mounting) | S · female rod · PT | $57.82 | |
| ACE63X25SB | 25 mm | Basic (no mounting) | S · male rod (B) · PT | $57.82 | |
| ACE63X30 | 30 mm | Basic (no mounting) | - · female rod · PT | $55.84 | |
| ACE63X30B | 30 mm | Basic (no mounting) | - · male rod (B) · PT | $55.84 | |
| ACE63X30S | 30 mm | Basic (no mounting) | S · female rod · PT | $58.45 | |
| ACE63X30SB | 30 mm | Basic (no mounting) | S · male rod (B) · PT | $58.45 | |
| ACE63X35 | 35 mm | Basic (no mounting) | - · female rod · PT | $56.52 | |
| ACE63X55S | 55 mm | Basic (no mounting) | S · female rod · PT | $61.94 | |
| ACE63X55SB | 55 mm | Basic (no mounting) | S · male rod (B) · PT | $61.94 | |
| ACE63X60 | 60 mm | Basic (no mounting) | - · female rod · PT | $60.20 | |
| ACE63X60B | 60 mm | Basic (no mounting) | - · male rod (B) · PT | $60.20 | |
| ACE63X60S | 60 mm | Basic (no mounting) | S · female rod · PT | $62.81 | |
| ACE63X60SB | 60 mm | Basic (no mounting) | S · male rod (B) · PT | $62.81 | |
| ACE63X60SBFTC | 60 mm | FTC front trunnion | S · male rod (B) · PT | $86.35 | |
| ACE63X70 | 70 mm | Basic (no mounting) | - · female rod · PT | $61.51 | |
| ACE63X70B | 70 mm | Basic (no mounting) | - · male rod (B) · PT | $61.51 | |
| ACE63X70S | 70 mm | Basic (no mounting) | S · female rod · PT | $64.12 | |
| ACE63X70SB | 70 mm | Basic (no mounting) | S · male rod (B) · PT | $64.12 | |
| ACE63X75 | 75 mm | Basic (no mounting) | - · female rod · PT | $62.38 | |
| ACE63X75B | 75 mm | Basic (no mounting) | - · male rod (B) · PT | $62.38 | |
| ACE63X75S | 75 mm | Basic (no mounting) | S · female rod · PT | $64.99 | |
| ACE63X75SB | 75 mm | Basic (no mounting) | S · male rod (B) · PT | $64.99 | |
| ACE63X80 | 80 mm | Basic (no mounting) | - · female rod · PT | $63.05 | |
| ACE63X80B | 80 mm | Basic (no mounting) | - · male rod (B) · PT | $63.05 | |
| ACE63X80S | 80 mm | Basic (no mounting) | S · female rod · PT | $65.67 | |
| ACE63X80SB | 80 mm | Basic (no mounting) | S · male rod (B) · PT | $65.67 | |
| ACE63X90 | 90 mm | Basic (no mounting) | - · female rod · PT | $64.56 | |
| ACE63X90B | 90 mm | Basic (no mounting) | - · male rod (B) · PT | $64.56 | |
| ACE63X90S | 90 mm | Basic (no mounting) | S · female rod · PT | $67.17 | |
| ACE63X90SB | 90 mm | Basic (no mounting) | S · male rod (B) · PT | $67.17 | |
| ACE63X150S | 150 mm | Basic (no mounting) | S · female rod · PT | $75.70 | |
| ACE63X150SB | 150 mm | Basic (no mounting) | S · male rod (B) · PT | $75.70 | |
| ACE63X160 | 160 mm | Basic (no mounting) | - · female rod · PT | $74.82 | |
| ACE63X160B | 160 mm | Basic (no mounting) | - · male rod (B) · PT | $74.82 | |
| ACE63X160S | 160 mm | Basic (no mounting) | S · female rod · PT | $77.44 | |
| ACE63X160SB | 160 mm | Basic (no mounting) | S · male rod (B) · PT | $77.44 | |
| ACE63X175 | 175 mm | Basic (no mounting) | - · female rod · PT | $77.20 | |
| ACE63X175B | 175 mm | Basic (no mounting) | - · male rod (B) · PT | $77.20 | |
| ACE63X175S | 175 mm | Basic (no mounting) | S · female rod · PT | $79.81 | |
| ACE63X175SB | 175 mm | Basic (no mounting) | S · male rod (B) · PT | $79.81 | |
| ACE63X175SBFTC | 175 mm | FTC front trunnion | S · male rod (B) · PT | $103.35 | |
| ACE63X200 | 200 mm | Basic (no mounting) | - · female rod · PT | $81.36 | |
| ACE63X200B | 200 mm | Basic (no mounting) | - · male rod (B) · PT | $81.36 | |
| ACE63X200S | 200 mm | Basic (no mounting) | S · female rod · PT | $83.98 | |
| ACE63X200SB | 200 mm | Basic (no mounting) | S · male rod (B) · PT | $83.98 | |
| ACE63X225 | 225 mm | Basic (no mounting) | - · female rod · PT | $85.28 | |
| ACE63X225B | 225 mm | Basic (no mounting) | - · male rod (B) · PT | $85.28 | |
| ACE63X225S | 225 mm | Basic (no mounting) | S · female rod · PT | $87.90 | |
| ACE63X225SB | 225 mm | Basic (no mounting) | S · male rod (B) · PT | $87.90 | |
| ACE63X250 | 250 mm | Basic (no mounting) | - · female rod · PT | $89.40 | |
| ACE63X250B | 250 mm | Basic (no mounting) | - · male rod (B) · PT | $89.40 | |
| ACE63X250S | 250 mm | Basic (no mounting) | S · female rod · PT | $92.02 | |
| ACE63X250SB | 250 mm | Basic (no mounting) | S · male rod (B) · PT | $92.02 | |
| ACE63X250SCB | 250 mm | CB double clevis | S · female rod · PT | $103.35 |
Need a combination that is not listed? Request a quote.
Where the ACE63 Is Used
General automation
About 1559 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right ACE63 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with CB double clevis, FTC front trunnion. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors; B gives a male threaded rod end instead of the standard female thread.
AirTAC ACE63 FAQ
No. Every ACE63 gives about 1559 N push and 1458 N pull at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
Brackets: CB double clevis, FTC front trunnion. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single ACE63. Orders are processed and handed to the carrier within 3-5 business days.
Buying the ACE63 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-28.
Request a Quote for the ACE63
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.