AirTAC ACE16 Compact Air Cylinder, 16 mm Bore
Every AirTAC ACE16 configuration on one page: 56 stock order codes with strokes from 5 to 75 mm and 1 mounting, from $26.20. Pick a stroke, mounting and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC ACE16
The AirTAC ACE16 is a double-acting compact cylinder with a 16 mm bore and an 8 mm piston rod. At 0.5 MPa it pushes 101 N and pulls 75 N; at 0.7 MPa that rises to 141 N push and 106 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All ACE16 versions share M5×0.8 air ports, an M4×0.7 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 56 stock order codes with strokes from 5 to 75 mm; the catalog maximum stroke is 75 mm.
ACE16 Technical Specifications
| Bore size | Ø16 mm |
|---|---|
| Stock strokes | 5 – 75 mm |
| Catalog maximum stroke | 75 mm (longer on request) |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Piston rod / rod thread | Ø8 mm / M4×0.7; male option (B) |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0469), ACE series ordering code and specifications.
Theoretical output force (Ø16 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | 106 N |
Push = pressure × bore area; pull subtracts the Ø8 mm rod area. Usable force is lower because of friction and back-pressure.
How the ACE16 Order Code Is Built
| ACE16 | Series and bore (16 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| B | Male threaded rod end (blank = female) |
| LB / FA / FB / CA / CB / CR / FTC / SDB | Mounting: LB foot; FA front flange; FB rear flange; CA single clevis; CB double clevis; CR rear pin clevis; FTC front trunnion; SDB pivot bracket (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC ACE16 Order Codes (56)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Rod end · Thread | Price | Select |
|---|---|---|---|---|---|
| ACE16X5 | 5 mm | Basic (no mounting) | - · female rod · PT | $26.20 | |
| ACE16X5B | 5 mm | Basic (no mounting) | - · male rod (B) · PT | $26.20 | |
| ACE16X5S | 5 mm | Basic (no mounting) | S · female rod · PT | $27.75 | |
| ACE16X5SB | 5 mm | Basic (no mounting) | S · male rod (B) · PT | $27.75 | |
| ACE16X10 | 10 mm | Basic (no mounting) | - · female rod · PT | $26.44 | |
| ACE16X10B | 10 mm | Basic (no mounting) | - · male rod (B) · PT | $26.44 | |
| ACE16X10S | 10 mm | Basic (no mounting) | S · female rod · PT | $27.94 | |
| ACE16X10SB | 10 mm | Basic (no mounting) | S · male rod (B) · PT | $27.94 | |
| ACE16X15 | 15 mm | Basic (no mounting) | - · female rod · PT | $26.88 | |
| ACE16X15B | 15 mm | Basic (no mounting) | - · male rod (B) · PT | $26.88 | |
| ACE16X15S | 15 mm | Basic (no mounting) | S · female rod · PT | $28.38 | |
| ACE16X15SB | 15 mm | Basic (no mounting) | S · male rod (B) · PT | $28.38 | |
| ACE16X20 | 20 mm | Basic (no mounting) | - · female rod · PT | $27.07 | |
| ACE16X20B | 20 mm | Basic (no mounting) | - · male rod (B) · PT | $27.07 | |
| ACE16X20S | 20 mm | Basic (no mounting) | S · female rod · PT | $28.62 | |
| ACE16X20SB | 20 mm | Basic (no mounting) | S · male rod (B) · PT | $28.62 | |
| ACE16X25 | 25 mm | Basic (no mounting) | - · female rod · PT | $27.51 | |
| ACE16X25B | 25 mm | Basic (no mounting) | - · male rod (B) · PT | $27.51 | |
| ACE16X25S | 25 mm | Basic (no mounting) | S · female rod · PT | $29.06 | |
| ACE16X25SB | 25 mm | Basic (no mounting) | S · male rod (B) · PT | $29.06 | |
| ACE16X30 | 30 mm | Basic (no mounting) | - · female rod · PT | $27.75 | |
| ACE16X30B | 30 mm | Basic (no mounting) | - · male rod (B) · PT | $27.75 | |
| ACE16X30S | 30 mm | Basic (no mounting) | S · female rod · PT | $29.25 | |
| ACE16X30SB | 30 mm | Basic (no mounting) | S · male rod (B) · PT | $29.25 | |
| ACE16X35 | 35 mm | Basic (no mounting) | - · female rod · PT | $28.18 | |
| ACE16X35B | 35 mm | Basic (no mounting) | - · male rod (B) · PT | $28.18 | |
| ACE16X35S | 35 mm | Basic (no mounting) | S · female rod · PT | $29.69 | |
| ACE16X35SB | 35 mm | Basic (no mounting) | S · male rod (B) · PT | $29.69 | |
| ACE16X40 | 40 mm | Basic (no mounting) | - · female rod · PT | $28.62 | |
| ACE16X40B | 40 mm | Basic (no mounting) | - · male rod (B) · PT | $28.62 | |
| ACE16X40S | 40 mm | Basic (no mounting) | S · female rod · PT | $30.12 | |
| ACE16X40SB | 40 mm | Basic (no mounting) | S · male rod (B) · PT | $30.12 | |
| ACE16X45 | 45 mm | Basic (no mounting) | - · female rod · PT | $29.06 | |
| ACE16X45B | 45 mm | Basic (no mounting) | - · male rod (B) · PT | $29.06 | |
| ACE16X45S | 45 mm | Basic (no mounting) | S · female rod · PT | $30.56 | |
| ACE16X45SB | 45 mm | Basic (no mounting) | S · male rod (B) · PT | $30.56 | |
| ACE16X50 | 50 mm | Basic (no mounting) | - · female rod · PT | $29.25 | |
| ACE16X50B | 50 mm | Basic (no mounting) | - · male rod (B) · PT | $29.25 | |
| ACE16X50S | 50 mm | Basic (no mounting) | S · female rod · PT | $30.80 | |
| ACE16X50SB | 50 mm | Basic (no mounting) | S · male rod (B) · PT | $30.80 | |
| ACE16X55 | 55 mm | Basic (no mounting) | - · female rod · PT | $29.69 | |
| ACE16X55B | 55 mm | Basic (no mounting) | - · male rod (B) · PT | $29.69 | |
| ACE16X55S | 55 mm | Basic (no mounting) | S · female rod · PT | $31.24 | |
| ACE16X55SB | 55 mm | Basic (no mounting) | S · male rod (B) · PT | $31.24 | |
| ACE16X60 | 60 mm | Basic (no mounting) | - · female rod · PT | $29.93 | |
| ACE16X60B | 60 mm | Basic (no mounting) | - · male rod (B) · PT | $29.93 | |
| ACE16X60S | 60 mm | Basic (no mounting) | S · female rod · PT | $31.43 | |
| ACE16X60SB | 60 mm | Basic (no mounting) | S · male rod (B) · PT | $31.43 | |
| ACE16X70 | 70 mm | Basic (no mounting) | - · female rod · PT | $30.56 | |
| ACE16X70B | 70 mm | Basic (no mounting) | - · male rod (B) · PT | $30.56 | |
| ACE16X70S | 70 mm | Basic (no mounting) | S · female rod · PT | $32.11 | |
| ACE16X70SB | 70 mm | Basic (no mounting) | S · male rod (B) · PT | $32.11 | |
| ACE16X75 | 75 mm | Basic (no mounting) | - · female rod · PT | $31.24 | |
| ACE16X75B | 75 mm | Basic (no mounting) | - · male rod (B) · PT | $31.24 | |
| ACE16X75S | 75 mm | Basic (no mounting) | S · female rod · PT | $32.74 | |
| ACE16X75SB | 75 mm | Basic (no mounting) | S · male rod (B) · PT | $32.74 |
Need a combination that is not listed? Request a quote.
Where the ACE16 Is Used
Small pushers and stoppers
About 101 N at 0.5 MPa suits light pushers, stoppers, gates and ejectors.
Packaging and assembly
Compact strokes for feeders, diverters and assembly stations.
Sensed positioning
Magnet versions report stroke ends to the PLC through cylinder sensors.
Choosing the Right ACE16 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors; B gives a male threaded rod end instead of the standard female thread.
AirTAC ACE16 FAQ
No. Every ACE16 gives about 101 N push and 75 N pull at 0.5 MPa, whatever the stroke.
M5×0.8 ports.
Basic mounting only. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single ACE16. Orders are processed and handed to the carrier within 3-5 business days.
Buying the ACE16 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-28.
Request a Quote for the ACE16
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.