Airtac ACE Compact Cylinder ACE16X10S
The AirTAC Airtac ACE Compact Cylinder ACE16X10S is a genuine double acting ISO 21287 compact air cylinder with a Ø16mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ16 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE16X10S
This AirTAC ACE16X10S is a double acting compact cylinder that uses air to both extend and retract its 8 mm rod, with a fixed TPU bumper at each end to absorb impact. The 16 mm bore delivers 100.5 N of push force at 0.5 MPa, making it a solid choice for light automation tasks.
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not. Since this model carries the optional -S magnet, you can mount CMSE or DMSE reed and solid-state switches for position sensing. For real work, plan on roughly 60 N of usable force at 0.5 MPa, which is about 6 kg of vertical lift with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE16X10S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE16X10S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | 106 N |
| Max (@1.0 MPa) | 21 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE16X10S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 16 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE16X10S Is Used
Tight Jig Clamping
Use the ACE16X10S to clamp small parts in a CNC fixture where the short ISO 21287 body clears the spindle and tool changer, with 100.5 N holding light workpieces.
Label Applicator
Drive a label tamp head on a packaging line with this 10 mm stroke cylinder, using the fitted magnet to trigger a CMSE sensor at the extend position for repeatable cycles.
PCB Pin Staking
In electronics assembly, this compact cylinder pushes connector pins into a PCB with 75.4 N of pull force on the return, fitting between guide rails where space is limited.
Is the Airtac ACE Compact Cylinder ACE16X10S the Right Cylinder?
When sizing, compare this 16 mm bore with the smaller 12 mm bore that pushes 56.5 N, or step up to a 20 mm bore for 157.1 N at the same 0.5 MPa pressure. The 10 mm stroke suits short indexing moves, and the M5x0.8 port keeps plumbing compact. Since the magnet is fitted, order CMSE or DMSE switches to confirm position. This cylinder does not hold its load if air pressure is lost, so add a rod lock or pilot check valve for vertical applications.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE16X10S FAQ
At 0.5 MPa, the push force is 100.5 N and the pull force is 75.4 N. At 0.7 MPa, push is 140.7 N and pull is 105.6 N. The theoretical maximum force is 20.5 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The ACE16X10S body is about 50% shorter than an ISO 15552 profile cylinder, so it mounts in tight spots. It has a hard-anodized aluminium body and a fixed TPU bumper at both ends, which absorbs end-of-stroke impact. The optional -S magnet on this model lets you add CMSE or DMSE switches for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE16X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.