Every AirTAC MA20 configuration on one page: 16 stock order codes with strokes from 10 to 250 mm and 2 cover/mounting combinations, from $32.18. Pick a stroke, cover and mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
The AirTAC MA20 is a double-acting stainless-steel mini cylinder with a 20 mm bore and an 8 mm piston rod. At 0.5 MPa it pushes 157 N and pulls 132 N; at 0.7 MPa that rises to 220 N push and 185 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All MA20 versions share 1/8" air ports, an M8×1.25 rod thread and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 16 stock order codes with strokes from 10 to 250 mm; the catalog maximum stroke is 500 mm.
| Bore size | Ø20 mm |
|---|---|
| Stock strokes | 10 – 250 mm |
| Catalog maximum stroke | 500 mm (longer on request) |
| Acting type | Double acting |
| Port size | 1/8" (PT standard, NPT) |
| Piston rod / rod thread | Ø8 mm / M8×1.25 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0455), MA series ordering code and specifications.
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 157 N | 132 N |
| 0.7 MPa | 220 N | 185 N |
Push = pressure × bore area; pull subtracts the Ø8 mm rod area. Usable force is lower because of friction and back-pressure.
| MA20 | Series and bore (20 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| CA / CM / U | Back cover: CA clevis-end cover; CM round-end cover; U flat-end cover |
| FA / LB / SDB | Mounting: FA front flange; LB foot bracket; SDB rear pivot bracket (blank = none) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Back cover · Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| MA20X10SCA | 10 mm | CA clevis-end cover | S · PT | $39.02 | |
| MA20X10SCAT | 10 mm | CA clevis-end cover | S · NPT | $39.02 | |
| MA20X15SCA | 15 mm | CA clevis-end cover | S · PT | $39.18 | |
| MA20X30SU | 30 mm | U flat-end cover | S · PT | $32.29 | |
| MA20X35SCA | 35 mm | CA clevis-end cover | S · PT | $32.29 | |
| MA20X40SU | 40 mm | U flat-end cover | S · PT | $32.29 | |
| MA20X50-S-CA | 50 mm | CA clevis-end cover | S · PT | $32.18 | |
| MA20X50SU | 50 mm | U flat-end cover | S · PT | $32.29 | |
| MA20X60SCA | 60 mm | CA clevis-end cover | S · PT | $43.50 | |
| MA20X75-S-CA | 75 mm | CA clevis-end cover | S · PT | $43.98 | |
| MA20X75SU | 75 mm | U flat-end cover | S · PT | $43.42 | |
| MA20X100-S-CA | 100 mm | CA clevis-end cover | S · PT | $46.22 | |
| MA20X100SU | 100 mm | U flat-end cover | S · PT | $45.66 | |
| MA20X125SCA | 125 mm | CA clevis-end cover | S · PT | $48.74 | |
| MA20X200SCA | 200 mm | CA clevis-end cover | S · PT | $56.30 | |
| MA20X250SCA | 250 mm | CA clevis-end cover | S · PT | $61.32 |
Need a combination that is not listed? Request a quote.
About 157 N at 0.5 MPa suits light pushers, stoppers, gates and ejectors.
Compact strokes for feeders, diverters and assembly stations.
Magnet versions report stroke ends to the PLC through cylinder sensors.
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the back cover and mounting. The back cover sets how the rear of the cylinder is fixed or where its air enters (CA clevis-end cover, U flat-end cover). A clevis-end cover with an SDB pivot bracket lets the cylinder swing; flat or round covers with an FA flange or LB foot hold it rigid.
Finally pick the version: S adds a magnet for position sensors; T gives NPT ports for North American fittings.
No. Every MA20 gives about 157 N push and 132 N pull at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard. The T version has NPT ports.
Back covers: CA clevis-end cover, U flat-end cover. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single MA20. Orders are processed and handed to the carrier within 3-5 business days.
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-28.
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.