AirTAC JSI100 Standard Air Cylinder, 100 mm Bore
Every AirTAC JSI100 configuration on one page: 171 stock order codes with strokes from 3 to 1800 mm and 6 mountings, from $127.24. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC JSI100
The AirTAC JSI100 is a double-acting standard air cylinder with a 100 mm bore and a 32 mm piston rod. At 0.5 MPa it pushes 3927 N and pulls 3525 N; at 0.7 MPa that rises to 5498 N push and 4935 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All JSI100 versions share 1/2" air ports, an M26×1.5 rod thread and 29 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 171 stock order codes with strokes from 3 to 1800 mm; the catalog maximum stroke is 1500 mm, and the longer codes are non-standard strokes we already supply.
JSI100 Technical Specifications
| Bore size | Ø100 mm |
|---|---|
| Stock strokes | 3 – 1800 mm |
| Catalog maximum stroke | 1500 mm (longer on request) |
| Acting type | Double acting |
| Port size | 1/2" (PT standard) |
| Piston rod / rod thread | Ø32 mm / M26×1.5 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion, 29 mm |
Source: AirTAC Products Catalog 2026A (PDF01-P0420), JSI series ordering code and specifications.
Theoretical output force (Ø100 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | 4935 N |
Push = pressure × bore area; pull subtracts the Ø32 mm rod area. Usable force is lower because of friction and back-pressure.
How the JSI100 Order Code Is Built
| JSI100 | Series and bore (100 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| LB / FA / FB / CA / CB / CR / TC | Mounting: LB foot; FA front flange; FB rear flange; CA single clevis; CB double clevis; CR rear pin clevis; TC center trunnion (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC JSI100 Order Codes (171)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| JSI100X3 | 3 mm | Basic (no mounting) | - · PT | $127.24 | |
| JSI100X20 | 20 mm | Basic (no mounting) | - · PT | $127.24 | |
| JSI100X25 | 25 mm | Basic (no mounting) | - · PT | $127.24 | |
| JSI100X25S | 25 mm | Basic (no mounting) | S · PT | $132.83 | |
| JSI100X25TC | 25 mm | TC center trunnion | - · PT | $173.77 | |
| JSI100X30S | 30 mm | Basic (no mounting) | S · PT | $135.82 | |
| JSI100X35 | 35 mm | Basic (no mounting) | - · PT | $130.24 | |
| JSI100X35S | 35 mm | Basic (no mounting) | S · PT | $135.82 | |
| JSI100X40 | 40 mm | Basic (no mounting) | - · PT | $130.24 | |
| JSI100X40S | 40 mm | Basic (no mounting) | S · PT | $135.82 | |
| JSI100X50 | 50 mm | Basic (no mounting) | - · PT | $130.24 | |
| JSI100X50S | 50 mm | Basic (no mounting) | S · PT | $135.82 | |
| JSI100X50FA | 50 mm | FA front flange | - · PT | $151.64 | |
| JSI100X50SFA | 50 mm | FA front flange | S · PT | $157.22 | |
| JSI100X50TC | 50 mm | TC center trunnion | - · PT | $176.77 | |
| JSI100X50STC | 50 mm | TC center trunnion | S · PT | $182.35 | |
| JSI100X55S | 55 mm | Basic (no mounting) | S · PT | $141.20 | |
| JSI100X60 | 60 mm | Basic (no mounting) | - · PT | $135.62 | |
| JSI100X60S | 60 mm | Basic (no mounting) | S · PT | $141.20 | |
| JSI100X65S | 65 mm | Basic (no mounting) | S · PT | $141.20 | |
| JSI100X70 | 70 mm | Basic (no mounting) | - · PT | $135.62 | |
| JSI100X70S | 70 mm | Basic (no mounting) | S · PT | $141.20 | |
| JSI100X75 | 75 mm | Basic (no mounting) | - · PT | $135.62 | |
| JSI100X75S | 75 mm | Basic (no mounting) | S · PT | $141.20 | |
| JSI100X75TC | 75 mm | TC center trunnion | - · PT | $182.14 | |
| JSI100X75STC | 75 mm | TC center trunnion | S · PT | $187.73 | |
| JSI100X80 | 80 mm | Basic (no mounting) | - · PT | $140.73 | |
| JSI100X80S | 80 mm | Basic (no mounting) | S · PT | $146.32 | |
| JSI100X80SLB | 80 mm | LB foot | S · PT | $153.04 | |
| JSI100X80STC | 80 mm | TC center trunnion | S · PT | $192.85 | |
| JSI100X90 | 90 mm | Basic (no mounting) | - · PT | $140.73 | |
| JSI100X100 | 100 mm | Basic (no mounting) | - · PT | $140.73 | |
| JSI100X100S | 100 mm | Basic (no mounting) | S · PT | $146.32 | |
| JSI100X100FA | 100 mm | FA front flange | - · PT | $162.14 | |
| JSI100X100CB | 100 mm | CB double clevis | - · PT | $163.53 | |
| JSI100X100TC | 100 mm | TC center trunnion | - · PT | $187.26 | |
| JSI100X100STC | 100 mm | TC center trunnion | S · PT | $192.85 | |
| JSI100X110 | 110 mm | Basic (no mounting) | - · PT | $146.06 | |
| JSI100X120 | 120 mm | Basic (no mounting) | - · PT | $146.06 | |
| JSI100X120S | 120 mm | Basic (no mounting) | S · PT | $151.64 | |
| JSI100X125 | 125 mm | Basic (no mounting) | - · PT | $146.06 | |
| JSI100X125S | 125 mm | Basic (no mounting) | S · PT | $151.64 | |
| JSI100X125TC | 125 mm | TC center trunnion | - · PT | $192.58 | |
| JSI100X125STC | 125 mm | TC center trunnion | S · PT | $198.17 | |
| JSI100X130 | 130 mm | Basic (no mounting) | - · PT | $151.18 | |
| JSI100X135S | 135 mm | Basic (no mounting) | S · PT | $156.76 | |
| JSI100X140 | 140 mm | Basic (no mounting) | - · PT | $151.18 | |
| JSI100X150 | 150 mm | Basic (no mounting) | - · PT | $151.18 | |
| JSI100X150S | 150 mm | Basic (no mounting) | S · PT | $156.76 | |
| JSI100X150SFB | 150 mm | FB rear flange | S · PT | $178.16 | |
| JSI100X150TC | 150 mm | TC center trunnion | - · PT | $197.70 | |
| JSI100X150STC | 150 mm | TC center trunnion | S · PT | $203.29 | |
| JSI100X155 | 155 mm | Basic (no mounting) | - · PT | $156.55 | |
| JSI100X160 | 160 mm | Basic (no mounting) | - · PT | $156.55 | |
| JSI100X160S | 160 mm | Basic (no mounting) | S · PT | $162.14 | |
| JSI100X160STC | 160 mm | TC center trunnion | S · PT | $208.67 | |
| JSI100X175 | 175 mm | Basic (no mounting) | - · PT | $156.55 | |
| JSI100X175S | 175 mm | Basic (no mounting) | S · PT | $162.14 | |
| JSI100X175CB | 175 mm | CB double clevis | - · PT | $179.35 | |
| JSI100X175TC | 175 mm | TC center trunnion | - · PT | $203.08 | |
| JSI100X175STC | 175 mm | TC center trunnion | S · PT | $208.67 | |
| JSI100X180 | 180 mm | Basic (no mounting) | - · PT | $161.67 | |
| JSI100X180S | 180 mm | Basic (no mounting) | S · PT | $167.25 | |
| JSI100X190S | 190 mm | Basic (no mounting) | S · PT | $167.25 | |
| JSI100X200 | 200 mm | Basic (no mounting) | - · PT | $161.67 | |
| JSI100X200S | 200 mm | Basic (no mounting) | S · PT | $167.25 | |
| JSI100X200FA | 200 mm | FA front flange | - · PT | $183.07 | |
| JSI100X200TC | 200 mm | TC center trunnion | - · PT | $208.20 | |
| JSI100X200STC | 200 mm | TC center trunnion | S · PT | $213.78 | |
| JSI100X210S | 210 mm | Basic (no mounting) | S · PT | $172.58 | |
| JSI100X215CB | 215 mm | CB double clevis | - · PT | $189.79 | |
| JSI100X220 | 220 mm | Basic (no mounting) | - · PT | $167.00 | |
| JSI100X220S | 220 mm | Basic (no mounting) | S · PT | $172.58 | |
| JSI100X220TC | 220 mm | TC center trunnion | - · PT | $213.52 | |
| JSI100X225 | 225 mm | Basic (no mounting) | - · PT | $167.00 | |
| JSI100X225S | 225 mm | Basic (no mounting) | S · PT | $172.58 | |
| JSI100X230 | 230 mm | Basic (no mounting) | - · PT | $172.12 | |
| JSI100X230S | 230 mm | Basic (no mounting) | S · PT | $177.70 | |
| JSI100X240S | 240 mm | Basic (no mounting) | S · PT | $177.70 | |
| JSI100X250 | 250 mm | Basic (no mounting) | - · PT | $172.12 | |
| JSI100X250S | 250 mm | Basic (no mounting) | S · PT | $177.70 | |
| JSI100X250SFA | 250 mm | FA front flange | S · PT | $199.10 | |
| JSI100X250CB | 250 mm | CB double clevis | - · PT | $194.91 | |
| JSI100X250TC | 250 mm | TC center trunnion | - · PT | $218.64 | |
| JSI100X250STC | 250 mm | TC center trunnion | S · PT | $224.23 | |
| JSI100X255S | 255 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X260 | 260 mm | Basic (no mounting) | - · PT | $182.35 | |
| JSI100X260S | 260 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X266 | 266 mm | Basic (no mounting) | - · PT | $182.35 | |
| JSI100X270S | 270 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X275S | 275 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X280S | 280 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X285S | 285 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X300 | 300 mm | Basic (no mounting) | - · PT | $182.35 | |
| JSI100X300S | 300 mm | Basic (no mounting) | S · PT | $187.93 | |
| JSI100X300SFA | 300 mm | FA front flange | S · PT | $209.34 | |
| JSI100X300TC | 300 mm | TC center trunnion | - · PT | $228.88 | |
| JSI100X300STC | 300 mm | TC center trunnion | S · PT | $234.46 | |
| JSI100X320 | 320 mm | Basic (no mounting) | - · PT | $192.85 | |
| JSI100X320TC | 320 mm | TC center trunnion | - · PT | $239.37 | |
| JSI100X325S | 325 mm | Basic (no mounting) | S · PT | $198.43 | |
| JSI100X330 | 330 mm | Basic (no mounting) | - · PT | $192.85 | |
| JSI100X340TC | 340 mm | TC center trunnion | - · PT | $239.37 | |
| JSI100X350 | 350 mm | Basic (no mounting) | - · PT | $192.85 | |
| JSI100X350S | 350 mm | Basic (no mounting) | S · PT | $198.43 | |
| JSI100X350TC | 350 mm | TC center trunnion | - · PT | $239.37 | |
| JSI100X350STC | 350 mm | TC center trunnion | S · PT | $244.95 | |
| JSI100X370S | 370 mm | Basic (no mounting) | S · PT | $208.87 | |
| JSI100X380S | 380 mm | Basic (no mounting) | S · PT | $208.87 | |
| JSI100X400 | 400 mm | Basic (no mounting) | - · PT | $203.29 | |
| JSI100X400S | 400 mm | Basic (no mounting) | S · PT | $208.87 | |
| JSI100X415S | 415 mm | Basic (no mounting) | S · PT | $219.37 | |
| JSI100X425S | 425 mm | Basic (no mounting) | S · PT | $219.37 | |
| JSI100X425TC | 425 mm | TC center trunnion | - · PT | $260.31 | |
| JSI100X450 | 450 mm | Basic (no mounting) | - · PT | $213.78 | |
| JSI100X450S | 450 mm | Basic (no mounting) | S · PT | $219.37 | |
| JSI100X450TC | 450 mm | TC center trunnion | - · PT | $260.31 | |
| JSI100X475S | 475 mm | Basic (no mounting) | S · PT | $240.30 | |
| JSI100X500 | 500 mm | Basic (no mounting) | - · PT | $234.72 | |
| JSI100X500S | 500 mm | Basic (no mounting) | S · PT | $240.30 | |
| JSI100X500LB | 500 mm | LB foot | - · PT | $241.44 | |
| JSI100X500TC | 500 mm | TC center trunnion | - · PT | $281.25 | |
| JSI100X520S | 520 mm | Basic (no mounting) | S · PT | $262.38 | |
| JSI100X530S | 530 mm | Basic (no mounting) | S · PT | $262.38 | |
| JSI100X550 | 550 mm | Basic (no mounting) | - · PT | $256.79 | |
| JSI100X550S | 550 mm | Basic (no mounting) | S · PT | $262.38 | |
| JSI100X550FA | 550 mm | FA front flange | - · PT | $278.20 | |
| JSI100X550SFB | 550 mm | FB rear flange | S · PT | $283.78 | |
| JSI100X550STC | 550 mm | TC center trunnion | S · PT | $308.90 | |
| JSI100X560 | 560 mm | Basic (no mounting) | - · PT | $256.79 | |
| JSI100X560S | 560 mm | Basic (no mounting) | S · PT | $262.38 | |
| JSI100X565SFA | 565 mm | FA front flange | S · PT | $283.78 | |
| JSI100X600 | 600 mm | Basic (no mounting) | - · PT | $256.79 | |
| JSI100X600S | 600 mm | Basic (no mounting) | S · PT | $262.38 | |
| JSI100X600SFA | 600 mm | FA front flange | S · PT | $283.78 | |
| JSI100X600TC | 600 mm | TC center trunnion | - · PT | $303.32 | |
| JSI100X610S | 610 mm | Basic (no mounting) | S · PT | $284.51 | |
| JSI100X650 | 650 mm | Basic (no mounting) | - · PT | $278.92 | |
| JSI100X650S | 650 mm | Basic (no mounting) | S · PT | $284.51 | |
| JSI100X700 | 700 mm | Basic (no mounting) | - · PT | $278.92 | |
| JSI100X700S | 700 mm | Basic (no mounting) | S · PT | $284.51 | |
| JSI100X700TC | 700 mm | TC center trunnion | - · PT | $325.45 | |
| JSI100X700STC | 700 mm | TC center trunnion | S · PT | $331.03 | |
| JSI100X710 | 710 mm | Basic (no mounting) | - · PT | $300.99 | |
| JSI100X750S | 750 mm | Basic (no mounting) | S · PT | $306.58 | |
| JSI100X800 | 800 mm | Basic (no mounting) | - · PT | $300.99 | |
| JSI100X800S | 800 mm | Basic (no mounting) | S · PT | $306.58 | |
| JSI100X800TC | 800 mm | TC center trunnion | - · PT | $347.52 | |
| JSI100X800STC | 800 mm | TC center trunnion | S · PT | $353.11 | |
| JSI100X900 | 900 mm | Basic (no mounting) | - · PT | $323.12 | |
| JSI100X900S | 900 mm | Basic (no mounting) | S · PT | $328.70 | |
| JSI100X950 | 950 mm | Basic (no mounting) | - · PT | $345.20 | |
| JSI100X1000 | 1000 mm | Basic (no mounting) | - · PT | $345.20 | |
| JSI100X1000S | 1000 mm | Basic (no mounting) | S · PT | $350.78 | |
| JSI100X1000FA | 1000 mm | FA front flange | - · PT | $366.60 | |
| JSI100X1000STC | 1000 mm | TC center trunnion | S · PT | $397.31 | |
| JSI100X1050S | 1050 mm | Basic (no mounting) | S · PT | $372.19 | |
| JSI100X1100 | 1100 mm | Basic (no mounting) | - · PT | $366.60 | |
| JSI100X1100S | 1100 mm | Basic (no mounting) | S · PT | $372.19 | |
| JSI100X1200 | 1200 mm | Basic (no mounting) | - · PT | $388.00 | |
| JSI100X1200S | 1200 mm | Basic (no mounting) | S · PT | $393.59 | |
| JSI100X1200STC | 1200 mm | TC center trunnion | S · PT | $440.12 | |
| JSI100X1250S | 1250 mm | Basic (no mounting) | S · PT | $414.99 | |
| JSI100X1400S | 1400 mm | Basic (no mounting) | S · PT | $436.39 | |
| JSI100X1500S | 1500 mm | Basic (no mounting) | S · PT | $457.79 | |
| JSI100X1600 | 1600 mm | Basic (no mounting) | - · PT | $473.61 | |
| JSI100X1600S | 1600 mm | Basic (no mounting) | S · PT | $479.20 | |
| JSI100X1600LB | 1600 mm | LB foot | - · PT | $480.38 | |
| JSI100X1650S | 1650 mm | Basic (no mounting) | S · PT | $500.60 | |
| JSI100X1700S | 1700 mm | Basic (no mounting) | S · PT | $500.60 | |
| JSI100X1800STC | 1800 mm | TC center trunnion | S · PT | $568.53 |
Need a combination that is not listed? Request a quote.
Where the JSI100 Is Used
Heavy pushing and lifting
About 3927 N at 0.5 MPa moves heavy slides, lifts gates and ejects parts.
Clamping and pressing
Rigid mountings for press-fit, riveting and heavy clamping.
Pivoting mechanisms
Clevis and trunnion versions drive levers, dampers and tilting tables.
Choosing the Right JSI100 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with LB foot, FA front flange, FB rear flange, CB double clevis, TC center trunnion. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors.
AirTAC JSI100 FAQ
No. Every JSI100 gives about 3927 N push and 3525 N pull at 0.5 MPa, whatever the stroke.
1/2" ports, PT thread as standard.
Brackets: LB foot, FA front flange, FB rear flange, CB double clevis, TC center trunnion. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single JSI100. Orders are processed and handed to the carrier within 3-5 business days.
Buying the JSI100 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-28.
Request a Quote for the JSI100
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.