Airtac JSI Series Standard Cylinder JSI100X60
The AirTAC Airtac JSI Series Standard Cylinder JSI100X60 is a genuine double acting JIS-standard air cylinder with a Ø100mm bore and 60mm stroke, G1/2 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ100 mm
- Stroke60 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM26×1.5
- CushionAdjustable, 33 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI100X60
Delivering 3927 N of push force at 0.5 MPa, this double-acting 100 mm bore cylinder handles heavy-duty automation with ease. Built to JIS standards, its extruded hard-anodized aluminum profile is purposefully shorter and more compact than a same-bore ISO 15552 unit, saving valuable machine space. The internal two-way piston seal retains grease for long, low-friction life.
This specific SKU lacks the -S magnet, meaning it cannot accept CMSE or DMSE position switches. For real-world sizing, plan for about 2356 N of actual work at 0.5 MPa, which safely lifts a 200 kg load vertically with a 2:1 margin. The G1/2 port and 33 mm adjustable air cushions at both ends ensure smooth deceleration under high kinetic loads.
Airtac JSI Series Standard Cylinder JSI100X60 Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI100X60 |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M26×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 33 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI100X60
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 100 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI100X60 Is Used
Press Fit Assembly
Drives heavy bearing housings into automotive gearbox castings, utilizing the 3927 N push force to seat components reliably without an oversized footprint.
Pallet Stopper Gate
Acts as a robust 60 mm stroke stopper arm on high-throughput conveyor lines, halting loaded pallets before the strapping station.
Heavy Carton Flap Folder
Folds thick corrugated flaps on industrial appliance packaging lines, where the compact JIS profile keeps the folder mechanism clear of adjacent rollers.
Is the Airtac JSI Series Standard Cylinder JSI100X60 the Right Cylinder?
When sizing this 100 mm bore unit, verify if the 80 mm bore (3518 N push at 0.7 MPa) offers enough force, or step up to the 125 mm option if you need more power. Because this is a non-magnet SKU, you must select the -S variant if your application requires CMSE or DMSE sensors. Mounting options include LB foot, FA/FB flange, CA/CB/CR clevis, TC/TCM1/TCM2 trunnion, or an I/Y/F/U rod knuckle.
Remember that a standard cylinder does not hold its load if air pressure drops or the valve is centered; the piston will drift. The cushions only decelerate the stroke near the end points. To suspend a load securely, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI100X60 FAQ
The JSI100X60 delivers a push force of 3927 N and a pull force of 3574 N at 0.5 MPa. At 0.7 MPa, push is 5497 N and pull is 5003 N. The theoretical maximum force is 801 kgf at 1.0 MPa. It features a G1/2 air port, a 32 mm piston rod, and operates at speeds between 30-800 mm/s.
No, this specific SKU does not include a magnet. To use CMSE or DMSE switches in the side sensor grooves, you must purchase the -S variant (JSI100X60-S). Additionally, while this JIS profile cylinder is shorter and more compact than an ISO 15552 equivalent, it does not hold position on air loss without an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI100X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.