AirTAC GF200 Air Filter, 1/8"-1/4" Ports
Every AirTAC GF200 air filter configuration on one page: 32 stock order codes with 1/8"-1/4" ports, 2 drain types and 40 µm or 5 µm elements, from $20.93. Pick port, drain and configuration to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF200
The AirTAC GF200 is a G-series compressed-air filter. It separates condensed water and filters out particles through a 40 or 5 µm element, with a polycarbonate (PC) bowl and 1/8"-1/4" ports. A filter only cleans the air; it does not set downstream pressure. Pair it with a GR regulator, or use a GFR filter regulator when pressure control is needed.
The maximum inlet pressure is 1.0 MPa (145 psi). Automatic and differential-pressure drain versions work from 0.15 to 1.0 MPa (22-145 psi); the manual-drain version works from 0 to 0.9 MPa (0-131 psi). Operating temperature is -5 to +70 °C with no freezing. Pressure loss through the element is low.
GF200 Technical Specifications
| Body size | GF200 |
|---|---|
| Ports | 1/8" (06), 1/4" (08) |
| Thread | PT (standard) |
| Filter element | 40 µm (standard), 5 µm (W) |
| Bowl material | PC (polycarbonate) |
| Bracket | Included (standard); J = without bracket |
| Fluid | Compressed air |
|---|---|
| Maximum inlet pressure | 1.0 MPa (145 psi) |
| Inlet pressure, auto / differential drain | 0.15 – 1.0 MPa (22 – 145 psi) |
| Inlet pressure, manual drain | 0 – 0.9 MPa (0 – 131 psi) |
| Temperature | -5 to +70 °C (no freezing) |
| Drain types | Differential-pressure drain, Manual drain (M) |
Source: AirTAC Products Catalog 2026A, G series GF200–600. Flow rate, weight and dimensions are not published in our data; request a quote for them.
How the GF200 Order Code Is Built
| GF200 | Body size (200 / 300 / 400 / 600; larger = higher flow) |
|---|---|
| C | C-body version (listed only where stocked) |
| 06/08 | Port size: 06 = 1/8", 08 = 1/4" |
| A / M | Drain: A = automatic, M = manual, blank = differential-pressure |
| J | Supplied without bracket (blank = bracket included) |
| W | 5 µm element (blank = 40 µm) |
| G / T | Thread: G = G (BSPP), T = NPT, blank = PT |
Example: GF20006 is one of the stock codes listed below.
All AirTAC GF200 Order Codes (32)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Port | Drain | Configuration | Price | Select |
|---|---|---|---|---|---|
| GF20006 | 1/8" (06) | Differential-pressure drain | 40 µm · With bracket · PT thread | $21.85 | |
| GF20006J | 1/8" (06) | Differential-pressure drain | 40 µm · No bracket (J) · PT thread | $20.93 | |
| GF20006W | 1/8" (06) | Differential-pressure drain | 5 µm (W) · With bracket · PT thread | $21.85 | |
| GF20006JW | 1/8" (06) | Differential-pressure drain | 5 µm (W) · No bracket (J) · PT thread | $20.93 | |
| GF200C06 | 1/8" (06) | Differential-pressure drain | C body · 40 µm · With bracket · PT thread | $27.54 | |
| GF200C06J | 1/8" (06) | Differential-pressure drain | C body · 40 µm · No bracket (J) · PT thread | $26.64 | |
| GF200C06W | 1/8" (06) | Differential-pressure drain | C body · 5 µm (W) · With bracket · PT thread | $27.54 | |
| GF200C06JW | 1/8" (06) | Differential-pressure drain | C body · 5 µm (W) · No bracket (J) · PT thread | $26.64 | |
| GF20006M | 1/8" (06) | Manual drain (M) | 40 µm · With bracket · PT thread | $21.85 | |
| GF20006MJ | 1/8" (06) | Manual drain (M) | 40 µm · No bracket (J) · PT thread | $20.93 | |
| GF20006MW | 1/8" (06) | Manual drain (M) | 5 µm (W) · With bracket · PT thread | $21.85 | |
| GF20006MJW | 1/8" (06) | Manual drain (M) | 5 µm (W) · No bracket (J) · PT thread | $20.93 | |
| GF200C06M | 1/8" (06) | Manual drain (M) | C body · 40 µm · With bracket · PT thread | $27.54 | |
| GF200C06MJ | 1/8" (06) | Manual drain (M) | C body · 40 µm · No bracket (J) · PT thread | $26.64 | |
| GF200C06MW | 1/8" (06) | Manual drain (M) | C body · 5 µm (W) · With bracket · PT thread | $27.54 | |
| GF200C06MJW | 1/8" (06) | Manual drain (M) | C body · 5 µm (W) · No bracket (J) · PT thread | $26.64 | |
| GF20008 | 1/4" (08) | Differential-pressure drain | 40 µm · With bracket · PT thread | $21.85 | |
| GF20008J | 1/4" (08) | Differential-pressure drain | 40 µm · No bracket (J) · PT thread | $20.93 | |
| GF20008W | 1/4" (08) | Differential-pressure drain | 5 µm (W) · With bracket · PT thread | $21.85 | |
| GF20008JW | 1/4" (08) | Differential-pressure drain | 5 µm (W) · No bracket (J) · PT thread | $20.93 | |
| GF200C08 | 1/4" (08) | Differential-pressure drain | C body · 40 µm · With bracket · PT thread | $27.54 | |
| GF200C08J | 1/4" (08) | Differential-pressure drain | C body · 40 µm · No bracket (J) · PT thread | $26.64 | |
| GF200C08W | 1/4" (08) | Differential-pressure drain | C body · 5 µm (W) · With bracket · PT thread | $27.54 | |
| GF200C08JW | 1/4" (08) | Differential-pressure drain | C body · 5 µm (W) · No bracket (J) · PT thread | $26.64 | |
| GF20008M | 1/4" (08) | Manual drain (M) | 40 µm · With bracket · PT thread | $21.85 | |
| GF20008MJ | 1/4" (08) | Manual drain (M) | 40 µm · No bracket (J) · PT thread | $20.93 | |
| GF20008MW | 1/4" (08) | Manual drain (M) | 5 µm (W) · With bracket · PT thread | $21.85 | |
| GF20008MJW | 1/4" (08) | Manual drain (M) | 5 µm (W) · No bracket (J) · PT thread | $20.93 | |
| GF200C08M | 1/4" (08) | Manual drain (M) | C body · 40 µm · With bracket · PT thread | $27.54 | |
| GF200C08MJ | 1/4" (08) | Manual drain (M) | C body · 40 µm · No bracket (J) · PT thread | $26.64 | |
| GF200C08MW | 1/4" (08) | Manual drain (M) | C body · 5 µm (W) · With bracket · PT thread | $27.54 | |
| GF200C08MJW | 1/4" (08) | Manual drain (M) | C body · 5 µm (W) · No bracket (J) · PT thread | $26.64 |
Need a combination that is not listed? Request a quote.
Where the GF200 Is Used
Machine air inlet
Fit the GF200 where compressed air enters a machine to stop water and dirt reaching valves and cylinders.
Condensate removal
The bowl collects condensed water from the compressor line; the drain type decides how it is emptied.
Before regulators and precision parts
Install ahead of a GR regulator or sensitive valves; use the 5 µm element where cleaner air is needed.
Choosing the Right GF200 Configuration
Start with the port size. Match the GF200 port to the pipe or fitting it connects to: 1/8" (06), 1/4" (08).
Then choose the drain. Manual drain (M) is opened by hand; it also works at low line pressure, from 0 MPa. The standard differential-pressure drain releases water when line pressure drops, for example at shutdown.
Finally the configuration. The 40 µm element is standard for general machine air; choose 5 µm (W) in front of precision valves and instruments. A mounting bracket is included unless the code carries J. Codes with C after the body size are AirTAC's C-body version, priced separately; ask us if you need to match an existing C unit.
AirTAC GF200 FAQ
No. The GF200 only filters water and particles. Use a GR regulator after it, or a GFR filter regulator that combines both.
1/8" (06), 1/4" (08). PT thread is standard.
Automatic drain for heavy condensate or unattended machines, manual drain when you empty the bowl by hand or run at very low pressure, and the standard differential-pressure drain for general use.
40 µm as standard. The W code gives a 5 µm element.
Up to 1.0 MPa (145 psi) inlet pressure and -5 to +70 °C with no freezing. Manual-drain versions are rated 0 to 0.9 MPa.
No. You can order a single GF200. Orders are processed and handed to the carrier within 3-5 business days.
Buying the GF200 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-09-27.
Request a Quote for the GF200
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.