AirTAC GF200-06 Filter (GF20006J)
The AirTAC AirTAC GF200-06 Filter (GF20006J) is a genuine G-series air filter. It separates condensed water and filters particulate from the compressed-air line through a 40 µm element, with PT1/8" ports and a differential-pressure drain. A filter does not set downstream pressure — pair it with a GR regulator, or use a GFR filter regulator, when pressure control is needed.
- TypeAir filter
- Port sizePT1/8"
- Filtering grade40 µm
- DrainDifferential-pressure drain
- Inlet pressure0.15 - 1.0 MPa (22 - 145 psi)
- Bowl materialPC
- ThreadPT
- BracketSupplied without bracket
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC GF200-06 Filter (GF20006J)
The GF series is an air filter only: it removes water and particulate from compressed air. It does not regulate pressure and it does not lubricate. This GF20006J is built at size 200 with 1/8 in. PT ports, carries the standard 40 um element, drains by differential pressure, and is ordered without a mounting bracket (J). With the differential-pressure drain the maximum inlet pressure is 1.0 MPa (145 psi), the working temperature range is -5 to 70 C (non-freezing), and the size 200 bowl is polycarbonate (PC).
This is a genuine AirTAC part. The GF range covers sizes 200, 300, 400 and 600 with ports from 1/8 in. to 1 in., with a choice of drain type (differential-pressure, automatic or manual), 40 um or 5 um filtration, bracket option, and PT, G (BSPP) or NPT threads; at size 600 the bowl is aluminium alloy. Flow is published as curves rather than a single rating, so we confirm the datasheet figures for your application on request.
AirTAC GF200-06 Filter (GF20006J) Technical Specifications
| Model | AirTAC GF200-06 Filter (GF20006J) |
|---|---|
| Series | GF200 air filter |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 40 µm |
| Drain type | Differential-pressure drain |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Inlet pressure | 0.15 - 1.0 MPa (22 - 145 psi) |
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Bowl material | PC |
| Feature | Low pressure loss |
Specifications follow the official AirTAC G-series air-preparation data. The inlet-pressure band is set by the drain type: automatic and differential-pressure drains run 0.15 - 1.0 MPa, a manual drain runs 0 - 0.9 MPa. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GF200-06 Filter (GF20006J)
| GF200 | G-series air filter, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain. Options are differential (blank), automatic (A) or manual (M). |
| J | Supplied without bracket. A bracket ships by default; J orders it without. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
Field order is size, port, drain, bracket, grade, thread — a blank position takes the default. Example: GF300-10AJW is a 300 body, PT3/8", automatic drain, no bracket, 5 µm element, PT thread.
Size Class
- GF200PT1/8" - PT1/4"
- GF300PT1/4" - PT1/2"
- GF400PT3/8" - PT1/2"
- GF600PT3/4" - PT1"
A larger body carries a larger port and passes more air at the same pressure drop. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure. The GF600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GF200 · PT1/8" · 40 µm |
|---|---|
| One size up | GF300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GF200-06 Filter (GF20006J) Is Used
Air-tool protection at the drop
Catching water and pipe-scale particles at a 1/8 in. drop before they reach impact drivers, ratchets and other shop air tools.
Solenoid valve pilot air cleanup
Point-of-use filtration ahead of pilot-operated solenoid valves on packaging and assembly machinery, keeping orifices and seats clear of condensate and debris.
Bench-mounted tool station filter
A compact filter at a maintenance bench supply that removes particulate and accumulated water from the air feeding hand-held pneumatic tools.
Is the AirTAC GF200-06 Filter (GF20006J) the Right Filter?
Size 200 with 1/8 in. PT ports is the smallest step in the G series, suited to light point-of-use duties; move to 300, 400 or 600 for larger ports and higher flow. This code uses the standard 40 um element (W gives the finer 5 um option) and a differential-pressure drain, with automatic (A) or manual (M) drains as alternatives. The J suffix means no mounting bracket; omit it for the bracket-included version. Thread is PT as standard, with G (BSPP) and NPT available to order. Flow is published as curves rather than a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Element 40 µm or 5 µm
- ✓ Drain: differential, automatic or manual
- ✓ Manual drain caps inlet at 0.9 MPa
- ✓ Thread PT, G (BSPP) or NPT
- ✓ Bracket needed, or order with J
Installation & Maintenance Notes
- check Mount vertically, bowl down, and follow the airflow arrow.
- check Put the filter first in the air-preparation line.
- check Keep inlet pressure within 0.15 - 1.0 MPa (22 - 145 psi).
- check Drain condensate before the bowl fills.
- check Keep the unit above freezing (-5 to +70 °C, unfreeze).
- check Replace the 40 µm element when pressure loss rises.
The PC bowl must not be cleaned with solvents or exposed to synthetic oils that attack polycarbonate — wipe it with a dry cloth. A filter removes water and particulate only; it does not regulate pressure or add lubrication.
AirTAC GF200-06 Filter (GF20006J) FAQ
Flow for the GF series is published as curves rather than a single rated figure, so we do not state a number on this page. Share your line pressure and air demand and we will confirm the datasheet curve and the suitability of this size on request.
J means the unit is supplied without a mounting bracket. The standard configuration includes a bracket, so if you need panel or wall fixing, order the code without the J suffix or tell us your requirement and we will confirm the right part.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GF200-06 Filter (GF20006J)
Send us the quantity, thread type (PT / G / NPT) and destination. We confirm price, availability and lead time — usually within 7-8 hours.