AirTAC SGJ250 Adjustable Double-Rod Steel-Barrel Cylinder, 250 mm Bore
Every AirTAC SGJ250 configuration on one page: 149 stock order codes with strokes from 25 to 1000 mm and 7 adjustment values (10-100 mm), 1 mounting, from $813.73. Pick a stroke, adjustment, mounting and version to see the exact order code and price.
Basic (no mounting) · NBR · PT
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC SGJ250
The AirTAC SGJ250 is a double-rod, double-acting steel-barrel large-bore ISO cylinder with a 250 mm bore and a 50 mm piston rod. The rod runs through both end covers, so push and pull are equal: 23562 N at 0.5 MPa and 32987 N at 0.7 MPa. The rear rod end carries the stroke adjuster: the travel can be shortened by up to the adjustment amount in the code (10-100 mm across the codes on this page). Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SGJ250 versions share 1" air ports, an M42×2.0 rod thread and 60 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 149 stock order codes with strokes from 25 to 1000 mm; the catalog maximum stroke is 1000 mm.
SGJ250 Technical Specifications
| Bore size | Ø250 mm |
|---|---|
| Stock strokes | 25 – 1000 mm |
| Catalog maximum stroke | 1000 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 1" (PT standard) |
| Piston rod / rod thread | Ø50 mm / M42×2.0 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable air cushion, 60 mm |
| Barrel | Steel tube (no sensor magnet) |
| Seal | NBR standard; H = FKM |
Source: AirTAC Products Catalog 2026A (PDF01-P0407/P0408), SG/SGC series (SGJ) ordering code and specifications. With FKM (H) seals the range is 0 to +150 °C.
Theoretical output force (Ø250 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
Both directions act on the bore area minus the Ø50 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the SGJ250 Order Code Is Built
| SGJ250 | Series and bore (250 mm) |
|---|---|
| X100 | Stroke in mm |
| -10 | Stroke adjustment in mm (10, 20, 30, 40, 50, 75, 100) |
| LB / FA / TC / FTC | Mounting: LB foot; FA front flange; TC center trunnion; FTC front trunnion (blank = none) |
| H | Seal: H = FKM (blank = NBR) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC SGJ250 Order Codes (149)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Adjust (mm) | Mounting · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SGJ250X25-10 | 25 mm | 10 mm | Basic (no mounting) · NBR · PT | $813.73 | |
| SGJ250X25-20 | 25 mm | 20 mm | Basic (no mounting) · NBR · PT | $813.73 | |
| SGJ250X25-30 | 25 mm | 30 mm | Basic (no mounting) · NBR · PT | $813.73 | |
| SGJ250X30-30 | 30 mm | 30 mm | Basic (no mounting) · NBR · PT | $839.79 | |
| SGJ250X50-10 | 50 mm | 10 mm | Basic (no mounting) · NBR · PT | $839.79 | |
| SGJ250X50-20 | 50 mm | 20 mm | Basic (no mounting) · NBR · PT | $839.79 | |
| SGJ250X50-30 | 50 mm | 30 mm | Basic (no mounting) · NBR · PT | $839.79 | |
| SGJ250X50-40 | 50 mm | 40 mm | Basic (no mounting) · NBR · PT | $839.79 | |
| SGJ250X50-50 | 50 mm | 50 mm | Basic (no mounting) · NBR · PT | $839.79 | |
| SGJ250X60-50 | 60 mm | 50 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X75-10 | 75 mm | 10 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X75-20 | 75 mm | 20 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X75-30 | 75 mm | 30 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X75-40 | 75 mm | 40 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X75-50 | 75 mm | 50 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X75-75 | 75 mm | 75 mm | Basic (no mounting) · NBR · PT | $866.10 | |
| SGJ250X80-10 | 80 mm | 10 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X80-20 | 80 mm | 20 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X80-30 | 80 mm | 30 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X80-40 | 80 mm | 40 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X80-50 | 80 mm | 50 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X80-75 | 80 mm | 75 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X80-100 | 80 mm | 100 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-10 | 100 mm | 10 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-20 | 100 mm | 20 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-30 | 100 mm | 30 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-40 | 100 mm | 40 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-50 | 100 mm | 50 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-75 | 100 mm | 75 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X100-100 | 100 mm | 100 mm | Basic (no mounting) · NBR · PT | $892.16 | |
| SGJ250X125-10 | 125 mm | 10 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X125-20 | 125 mm | 20 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X125-30 | 125 mm | 30 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X125-40 | 125 mm | 40 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X125-50 | 125 mm | 50 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X125-75 | 125 mm | 75 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X125-100 | 125 mm | 100 mm | Basic (no mounting) · NBR · PT | $923.54 | |
| SGJ250X150-10 | 150 mm | 10 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X150-20 | 150 mm | 20 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X150-30 | 150 mm | 30 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X150-40 | 150 mm | 40 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X150-50 | 150 mm | 50 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X150-75 | 150 mm | 75 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X150-100 | 150 mm | 100 mm | Basic (no mounting) · NBR · PT | $952.38 | |
| SGJ250X160-10 | 160 mm | 10 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X160-20 | 160 mm | 20 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X160-30 | 160 mm | 30 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X160-40 | 160 mm | 40 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X160-50 | 160 mm | 50 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X160-75 | 160 mm | 75 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X160-100 | 160 mm | 100 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-10 | 175 mm | 10 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-20 | 175 mm | 20 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-30 | 175 mm | 30 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-40 | 175 mm | 40 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-50 | 175 mm | 50 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-75 | 175 mm | 75 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X175-100 | 175 mm | 100 mm | Basic (no mounting) · NBR · PT | $981.23 | |
| SGJ250X200-10 | 200 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X200-20 | 200 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X200-30 | 200 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X200-40 | 200 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X200-50 | 200 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X200-75 | 200 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X200-100 | 200 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,009.87 | |
| SGJ250X225-10 | 225 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X225-20 | 225 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X225-30 | 225 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X225-40 | 225 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X225-50 | 225 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X225-75 | 225 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X225-100 | 225 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,041.25 | |
| SGJ250X250-10 | 250 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X250-20 | 250 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X250-30 | 250 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X250-40 | 250 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X250-50 | 250 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X250-75 | 250 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X250-100 | 250 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,070.10 | |
| SGJ250X300-10 | 300 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X300-20 | 300 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X300-30 | 300 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X300-40 | 300 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X300-50 | 300 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X300-75 | 300 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X300-100 | 300 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,127.79 | |
| SGJ250X350-10 | 350 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X350-20 | 350 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X350-30 | 350 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X350-40 | 350 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X350-50 | 350 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X350-75 | 350 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X350-100 | 350 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,187.82 | |
| SGJ250X400-10 | 400 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X400-20 | 400 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X400-30 | 400 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X400-40 | 400 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X400-50 | 400 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X400-75 | 400 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X400-100 | 400 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,245.51 | |
| SGJ250X450-10 | 450 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X450-20 | 450 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X450-30 | 450 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X450-40 | 450 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X450-50 | 450 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X450-75 | 450 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X450-100 | 450 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,305.79 | |
| SGJ250X500-10 | 500 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X500-20 | 500 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X500-30 | 500 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X500-40 | 500 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X500-50 | 500 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X500-75 | 500 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X500-100 | 500 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,363.23 | |
| SGJ250X600-10 | 600 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X600-20 | 600 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X600-30 | 600 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X600-40 | 600 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X600-50 | 600 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X600-75 | 600 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X600-100 | 600 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,488.85 | |
| SGJ250X700-10 | 700 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X700-20 | 700 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X700-30 | 700 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X700-40 | 700 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X700-50 | 700 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X700-75 | 700 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X700-100 | 700 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,614.48 | |
| SGJ250X800-10 | 800 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X800-20 | 800 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X800-30 | 800 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X800-40 | 800 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X800-50 | 800 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X800-75 | 800 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X800-100 | 800 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,740.10 | |
| SGJ250X900-10 | 900 mm | 10 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X900-20 | 900 mm | 20 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X900-30 | 900 mm | 30 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X900-40 | 900 mm | 40 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X900-50 | 900 mm | 50 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X900-75 | 900 mm | 75 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X900-100 | 900 mm | 100 mm | Basic (no mounting) · NBR · PT | $1,871.10 | |
| SGJ250X1000-10 | 1000 mm | 10 mm | Basic (no mounting) · NBR · PT | $2,001.84 | |
| SGJ250X1000-20 | 1000 mm | 20 mm | Basic (no mounting) · NBR · PT | $2,001.84 | |
| SGJ250X1000-30 | 1000 mm | 30 mm | Basic (no mounting) · NBR · PT | $2,001.84 | |
| SGJ250X1000-40 | 1000 mm | 40 mm | Basic (no mounting) · NBR · PT | $2,001.84 | |
| SGJ250X1000-50 | 1000 mm | 50 mm | Basic (no mounting) · NBR · PT | $2,001.84 | |
| SGJ250X1000-75 | 1000 mm | 75 mm | Basic (no mounting) · NBR · PT | $2,001.84 | |
| SGJ250X1000-100 | 1000 mm | 100 mm | Basic (no mounting) · NBR · PT | $2,001.84 |
Need a combination that is not listed? Request a quote.
Where the SGJ250 Is Used
High-force actuation
Over 23.6 kN at 0.5 MPa for presses, lifting tables and dampers.
Process and material handling
Opens chutes, gates and dampers on bulk-handling equipment.
Pivoting heavy loads
Clevis and trunnion versions swing large doors and platforms.
Choosing the Right SGJ250 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then the stroke adjustment (10-100 mm): pick the amount by which you need to trim the stroke on the machine. The cylinder can be set anywhere between full stroke and full stroke minus that amount.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: the steel barrel takes no sensor magnet.
AirTAC SGJ250 FAQ
No. Every SGJ250 gives about 23562 N in both directions at 0.5 MPa, whatever the stroke.
The number after the dash is the adjustable range in mm. An SGJ250X100-50, for example, can be set to any stroke between 50 and 100 mm.
1" ports, PT thread as standard.
Basic mounting only. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SGJ250. Orders are processed and handed to the carrier within 3-5 business days.
Buying the SGJ250 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-09.
Request a Quote for the SGJ250
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.