AirTAC LGC2B Crossed Roller Guide, Φ2 mm Rollers, Four-Rail Set
Every stocked AirTAC LGC2B set on one page: 26 order codes with rails from 30 to 180 mm, from $95.81. Pick the rail length and roller count to see the exact order code and price.
High (H)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC LGC2B
The AirTAC LGC2B is an LGC crossed roller guide with Φ2 mm rollers, supplied as a complete four-rail set (B): rails, roller cages and end screws. Each roller is rated C 292 N dynamic and C0 290 N static (97 N allowable load), at 4 mm roller pitch.
Crossed roller guides are non-recirculating: precision rollers set alternately at right angles run between V-grooved rails, so friction is very low while the rigid rails carry high loads. The rails are stainless steel and the rollers are JIS B 1506 G2 grade. Main and secondary rails are the same length. This page lists 30 – 180 mm rails with 6 – 36 rollers per cage.
LGC2B Technical Specifications
| Roller diameter | Φ2 mm |
|---|---|
| Set type | Four-rail (B) |
| Roller pitch | 4 mm |
| Stocked rail lengths | 30 – 180 mm |
| Rollers per cage | R6 – R36 |
| Material | Stainless steel rails |
| Dynamic load rating C | 292 N per roller |
|---|---|
| Static load rating C0 | 290 N per roller |
| Allowable load | 97 N per roller |
| Height H tolerance H / P | ±0.02 / ±0.01 mm |
| Width W tolerance H / P | ±0.02 / ±0.01 mm |
| Accuracy | high (H) |
Source: AirTAC linear guide catalog (PDF02-P0097 to P0101), LGC ordering codes and size tables.
How the LGC2B Order Code Is Built
| LGC | LGC crossed roller guide |
|---|---|
| 2 | Roller Φ2 mm |
| A / B | Three-rail / four-rail set |
| 30 | Rail length in mm |
| R6 | Rollers per cage |
| -H / P | High / precision accuracy |
All AirTAC LGC2B Order Codes (26)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Rail length | Rollers per cage | Accuracy | Price | Select |
|---|---|---|---|---|---|
| LGC2B30R6-H | 30 mm rails | R6 (6 rollers) | High (H) | $95.81 | |
| LGC2B30R7-H | 30 mm rails | R7 (7 rollers) | High (H) | $98.13 | |
| LGC2B45R8-H | 45 mm rails | R8 (8 rollers) | High (H) | $111.63 | |
| LGC2B45R9-H | 45 mm rails | R9 (9 rollers) | High (H) | $113.95 | |
| LGC2B45R10-H | 45 mm rails | R10 (10 rollers) | High (H) | $116.28 | |
| LGC2B60R11-H | 60 mm rails | R11 (11 rollers) | High (H) | $130.03 | |
| LGC2B60R13-H | 60 mm rails | R13 (13 rollers) | High (H) | $134.43 | |
| LGC2B75R13-H | 75 mm rails | R13 (13 rollers) | High (H) | $145.85 | |
| LGC2B75R16-H | 75 mm rails | R16 (16 rollers) | High (H) | $152.57 | |
| LGC2B90R16-H | 90 mm rails | R16 (16 rollers) | High (H) | $167.72 | |
| LGC2B105R19-H | 105 mm rails | R19 (19 rollers) | High (H) | $193.05 | |
| LGC2B105R22-H | 105 mm rails | R22 (22 rollers) | High (H) | $203.08 | |
| LGC2B120R22-H | 120 mm rails | R22 (22 rollers) | High (H) | $218.64 | |
| LGC2B120R25-H | 120 mm rails | R25 (25 rollers) | High (H) | $228.67 | |
| LGC2B135R22-H | 135 mm rails | R22 (22 rollers) | High (H) | $233.79 | |
| LGC2B135R25-H | 135 mm rails | R25 (25 rollers) | High (H) | $243.77 | |
| LGC2B135R28-H | 135 mm rails | R28 (28 rollers) | High (H) | $254.00 | |
| LGC2B150R25-H | 150 mm rails | R25 (25 rollers) | High (H) | $266.82 | |
| LGC2B150R28-H | 150 mm rails | R28 (28 rollers) | High (H) | $276.80 | |
| LGC2B150R32-H | 150 mm rails | R32 (32 rollers) | High (H) | $290.29 | |
| LGC2B165R28-H | 165 mm rails | R28 (28 rollers) | High (H) | $299.60 | |
| LGC2B165R32-H | 165 mm rails | R32 (32 rollers) | High (H) | $313.09 | |
| LGC2B165R36-H | 165 mm rails | R36 (36 rollers) | High (H) | $326.59 | |
| LGC2B180R28-H | 180 mm rails | R28 (28 rollers) | High (H) | $322.66 | |
| LGC2B180R32-H | 180 mm rails | R32 (32 rollers) | High (H) | $335.89 | |
| LGC2B180R36-H | 180 mm rails | R36 (36 rollers) | High (H) | $349.38 |
Need a combination that is not listed? Request a quote.
Where the LGC2B Is Used
Measuring and optical equipment
Optical test instruments, optical benches and X-ray equipment slides.
PCB and electronics machines
Slides of printed circuit board drilling machines and inspection stages.
Precision stages
Short-stroke XY and Z stages that need high rigidity and accuracy.
Choosing the Right LGC2B Configuration
Start with the rail length: it sets the size of the slide.
Then the number of rollers per cage. More rollers carry more load but leave less stroke on a given rail length; the catalog's maximum-stroke table lists the stroke of each combination.
Accuracy is H (high) or P (precision). For a size or combination not listed, request a quote.
AirTAC LGC2B FAQ
A is a three-rail set and B a four-rail set; both use the same rollers and rail lengths. LGC6 is made as a four-rail set only.
Yes. Order LGC2R plus the roller count, for example LGC2R6.
Usually yes. Request a quote with the full order code and we will confirm price and lead time.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the LGC2B from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the LGC2B
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.