AirTAC MGCD63 Double-Rod Cushioned Mini Cylinder, 63 mm Bore
Every AirTAC MGCD63 configuration on one page: 28 stock order codes with strokes from 25 to 500 mm and 1 mounting, from $102.04. Pick a stroke, mounting and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MGCD63
The AirTAC MGCD63 is a double-rod, double-acting stainless-steel mini cylinder with adjustable cushions with a 63 mm bore and a 20 mm piston rod. The rod runs through both end covers, so push and pull are equal: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All MGCD63 versions share 1/4" air ports, an M18×1.5 rod thread and adjustable air cushions at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 28 stock order codes with strokes from 25 to 500 mm; the catalog maximum stroke is 300 mm, and the longer codes are non-standard strokes we already supply.
MGCD63 Technical Specifications
| Bore size | Ø63 mm |
|---|---|
| Stock strokes | 25 – 500 mm |
| Catalog maximum stroke | 300 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 1/4" (PT standard) |
| Piston rod / rod thread | Ø20 mm / M18×1.5 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion |
Source: AirTAC Products Catalog 2026A (PDF01-P0449), MG (MGC cushioned) series (MGCD) ordering code and specifications.
Theoretical output force (Ø63 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
Both directions act on the bore area minus the Ø20 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the MGCD63 Order Code Is Built
| MGCD63 | Series and bore (63 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| CB / FA / LB / SDB | Mounting: CB double clevis; FA flange; LB foot bracket; SDB pivot bracket (blank = none) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC MGCD63 Order Codes (28)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| MGCD63X25 | 25 mm | Basic (no mounting) | - · PT | $102.04 | |
| MGCD63X25S | 25 mm | Basic (no mounting) | S · PT | $105.52 | |
| MGCD63X50 | 50 mm | Basic (no mounting) | - · PT | $105.96 | |
| MGCD63X50S | 50 mm | Basic (no mounting) | S · PT | $109.45 | |
| MGCD63X75 | 75 mm | Basic (no mounting) | - · PT | $110.32 | |
| MGCD63X75S | 75 mm | Basic (no mounting) | S · PT | $113.81 | |
| MGCD63X100 | 100 mm | Basic (no mounting) | - · PT | $114.24 | |
| MGCD63X100S | 100 mm | Basic (no mounting) | S · PT | $117.73 | |
| MGCD63X125 | 125 mm | Basic (no mounting) | - · PT | $118.41 | |
| MGCD63X125S | 125 mm | Basic (no mounting) | S · PT | $121.90 | |
| MGCD63X175 | 175 mm | Basic (no mounting) | - · PT | $127.32 | |
| MGCD63X175S | 175 mm | Basic (no mounting) | S · PT | $130.81 | |
| MGCD63X200 | 200 mm | Basic (no mounting) | - · PT | $131.24 | |
| MGCD63X200S | 200 mm | Basic (no mounting) | S · PT | $134.73 | |
| MGCD63X225 | 225 mm | Basic (no mounting) | - · PT | $135.40 | |
| MGCD63X225S | 225 mm | Basic (no mounting) | S · PT | $138.89 | |
| MGCD63X250 | 250 mm | Basic (no mounting) | - · PT | $139.52 | |
| MGCD63X250S | 250 mm | Basic (no mounting) | S · PT | $143.01 | |
| MGCD63X300 | 300 mm | Basic (no mounting) | - · PT | $147.61 | |
| MGCD63X300S | 300 mm | Basic (no mounting) | S · PT | $151.10 | |
| MGCD63X350 | 350 mm | Basic (no mounting) | - · PT | $155.65 | |
| MGCD63X350S | 350 mm | Basic (no mounting) | S · PT | $159.13 | |
| MGCD63X400 | 400 mm | Basic (no mounting) | - · PT | $163.49 | |
| MGCD63X400S | 400 mm | Basic (no mounting) | S · PT | $166.98 | |
| MGCD63X450 | 450 mm | Basic (no mounting) | - · PT | $171.58 | |
| MGCD63X450S | 450 mm | Basic (no mounting) | S · PT | $175.07 | |
| MGCD63X500 | 500 mm | Basic (no mounting) | - · PT | $179.43 | |
| MGCD63X500S | 500 mm | Basic (no mounting) | S · PT | $182.92 |
Need a combination that is not listed? Request a quote.
Where the MGCD63 Is Used
General automation
About 1402 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right MGCD63 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors.
AirTAC MGCD63 FAQ
No. Every MGCD63 gives about 1402 N in both directions at 0.5 MPa, whatever the stroke.
1/4" ports, PT thread as standard.
Basic mounting only. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single MGCD63. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MGCD63 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the MGCD63
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.