AirTAC TACQ100 Guided Compact Cylinder, 100 mm Bore
Every AirTAC TACQ100 configuration on one page: 22 stock order codes with strokes from 10 to 100 mm, magnet versions, from $156.09. Pick a stroke and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC TACQ100
The AirTAC TACQ100 is a double-acting compact (ultra-thin) cylinder with a 100 mm bore and a 32 mm piston rod. At 0.5 MPa it pushes 3927 N and pulls 3525 N; at 0.7 MPa that rises to 5498 N push and 4935 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output. Two guide rods hold the end plate against rotation: AirTAC rates the non-rotation accuracy at ±0.15°, the angle the plate can turn with the cylinder fully retracted. The double guide rods resist bending and torsion, so the cylinder takes larger moving and side loads; they are hard-chrome-plated S45C steel running in brass bushings.
All TACQ100 versions share 3/8" air ports and rubber bumpers at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 22 stock order codes with strokes from 10 to 100 mm; catalog standard strokes run up to 100 mm.
TACQ100 Technical Specifications
| Bore size | Ø100 mm |
|---|---|
| Stock strokes | 10 – 100 mm |
| Catalog standard stroke | up to 100 mm (longer on request) |
| Acting type | Double acting, with guide rods |
| Port size | 3/8" (PT standard) |
| Piston rod | Ø32 mm |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Rubber bumper at both ends |
Source: AirTAC Products Catalog 2026A (PDF01-P0485), ACQ (TACQ) series ordering code and specifications.
Theoretical output force (Ø100 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | 4935 N |
Push = pressure × bore area; pull subtracts the Ø32 mm rod area. Usable force is lower because of friction and back-pressure.
How the TACQ100 Order Code Is Built
| TACQ100 | Series and bore (100 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| - | Mounting: basic only |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC TACQ100 Order Codes (22)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| TACQ100X10 | 10 mm | Basic (no mounting) | - · PT | $156.09 | |
| TACQ100X10S | 10 mm | Basic (no mounting) | S · PT | $171.18 | |
| TACQ100X15 | 15 mm | Basic (no mounting) | - · PT | $158.16 | |
| TACQ100X15S | 15 mm | Basic (no mounting) | S · PT | $173.30 | |
| TACQ100X20 | 20 mm | Basic (no mounting) | - · PT | $161.41 | |
| TACQ100X20S | 20 mm | Basic (no mounting) | S · PT | $176.56 | |
| TACQ100X25 | 25 mm | Basic (no mounting) | - · PT | $164.00 | |
| TACQ100X25S | 25 mm | Basic (no mounting) | S · PT | $179.09 | |
| TACQ100X30 | 30 mm | Basic (no mounting) | - · PT | $167.25 | |
| TACQ100X30S | 30 mm | Basic (no mounting) | S · PT | $182.35 | |
| TACQ100X35 | 35 mm | Basic (no mounting) | - · PT | $170.51 | |
| TACQ100X35S | 35 mm | Basic (no mounting) | S · PT | $185.61 | |
| TACQ100X40 | 40 mm | Basic (no mounting) | - · PT | $173.30 | |
| TACQ100X40S | 40 mm | Basic (no mounting) | S · PT | $188.40 | |
| TACQ100X45 | 45 mm | Basic (no mounting) | - · PT | $176.30 | |
| TACQ100X45S | 45 mm | Basic (no mounting) | S · PT | $191.45 | |
| TACQ100X50 | 50 mm | Basic (no mounting) | - · PT | $179.35 | |
| TACQ100X50S | 50 mm | Basic (no mounting) | S · PT | $194.45 | |
| TACQ100X75 | 75 mm | Basic (no mounting) | - · PT | $196.31 | |
| TACQ100X75S | 75 mm | Basic (no mounting) | S · PT | $211.46 | |
| TACQ100X100 | 100 mm | Basic (no mounting) | - · PT | $214.25 | |
| TACQ100X100S | 100 mm | Basic (no mounting) | S · PT | $229.34 |
Need a combination that is not listed? Request a quote.
Where the TACQ100 Is Used
Heavy pushing and lifting
About 3927 N at 0.5 MPa moves heavy slides, lifts gates and ejects parts.
Clamping and pressing
Rigid mountings for press-fit, riveting and heavy clamping.
Pivoting mechanisms
Clevis and trunnion versions drive levers, dampers and tilting tables.
Choosing the Right TACQ100 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Every code on this page is the basic version without a mounting code: the cylinder is fixed through its own mounting holes.
Finally pick the version: S adds a magnet for position sensors.
AirTAC TACQ100 FAQ
No. Every TACQ100 gives about 3927 N push and 3525 N pull at 0.5 MPa, whatever the stroke.
±0.15°, measured as the angle the end plate can turn with the cylinder fully retracted (AirTAC catalog). The two guide rods also carry side loads that would bend a plain piston rod.
3/8" ports, PT thread as standard.
Every code on this page is the basic version without a mounting code; the cylinder is fixed through its own mounting holes.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single TACQ100. Orders are processed and handed to the carrier within 3-5 business days.
Buying the TACQ100 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the TACQ100
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.