Every AirTAC SCD200 configuration on one page: 42 stock order codes with strokes from 25 to 1000 mm, magnet versions, from $350.11. Pick a stroke and version to see the exact order code and price.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
The AirTAC SCD200 is a double-rod, double-acting tie-rod cylinder with a 200 mm bore and a 40 mm piston rod. The rod runs through both end covers, so push and pull are equal: 15080 N at 0.5 MPa and 21112 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SCD200 versions share 3/4" air ports, an M36×2 rod thread and 33 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 42 stock order codes with strokes from 25 to 1000 mm; catalog standard strokes run up to 1000 mm.
| Bore size | Ø200 mm |
|---|---|
| Stock strokes | 25 – 1000 mm |
| Catalog standard stroke | up to 1000 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 3/4" (PT standard) |
| Piston rod / rod thread | Ø40 mm / M36×2 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
Source: AirTAC Products Catalog 2026A, SC series (SCD double-rod version, same body as SC).
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 15080 N | 15080 N |
| 0.7 MPa | 21112 N | 21112 N |
Both directions act on the bore area minus the Ø40 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
| SCD200 | Series and bore (200 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| - | Mounting: basic only |
| H / N | Seal: H = FKM, N = NBR (blank = standard seal) |
| G | Port thread: G = G (BSPP), blank = PT |
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SCD200X25 | 25 mm | Basic (no mounting) | - · std seal · PT | $350.11 | |
| SCD200X25S | 25 mm | Basic (no mounting) | S · std seal · PT | $357.09 | |
| SCD200X50 | 50 mm | Basic (no mounting) | - · std seal · PT | $362.21 | |
| SCD200X50S | 50 mm | Basic (no mounting) | S · std seal · PT | $369.18 | |
| SCD200X75 | 75 mm | Basic (no mounting) | - · std seal · PT | $374.30 | |
| SCD200X75S | 75 mm | Basic (no mounting) | S · std seal · PT | $381.28 | |
| SCD200X80 | 80 mm | Basic (no mounting) | - · std seal · PT | $389.40 | |
| SCD200X80S | 80 mm | Basic (no mounting) | S · std seal · PT | $396.38 | |
| SCD200X100 | 100 mm | Basic (no mounting) | - · std seal · PT | $389.40 | |
| SCD200X100S | 100 mm | Basic (no mounting) | S · std seal · PT | $396.38 | |
| SCD200X125 | 125 mm | Basic (no mounting) | - · std seal · PT | $404.54 | |
| SCD200X125S | 125 mm | Basic (no mounting) | S · std seal · PT | $411.53 | |
| SCD200X150 | 150 mm | Basic (no mounting) | - · std seal · PT | $419.64 | |
| SCD200X150S | 150 mm | Basic (no mounting) | S · std seal · PT | $426.62 | |
| SCD200X160 | 160 mm | Basic (no mounting) | - · std seal · PT | $434.79 | |
| SCD200X160S | 160 mm | Basic (no mounting) | S · std seal · PT | $441.77 | |
| SCD200X175 | 175 mm | Basic (no mounting) | - · std seal · PT | $434.79 | |
| SCD200X175S | 175 mm | Basic (no mounting) | S · std seal · PT | $441.77 | |
| SCD200X200 | 200 mm | Basic (no mounting) | - · std seal · PT | $449.88 | |
| SCD200X200S | 200 mm | Basic (no mounting) | S · std seal · PT | $456.86 | |
| SCD200X250 | 250 mm | Basic (no mounting) | - · std seal · PT | $480.13 | |
| SCD200X250S | 250 mm | Basic (no mounting) | S · std seal · PT | $487.10 | |
| SCD200X300 | 300 mm | Basic (no mounting) | - · std seal · PT | $495.28 | |
| SCD200X300S | 300 mm | Basic (no mounting) | S · std seal · PT | $502.25 | |
| SCD200X350 | 350 mm | Basic (no mounting) | - · std seal · PT | $525.52 | |
| SCD200X350S | 350 mm | Basic (no mounting) | S · std seal · PT | $532.50 | |
| SCD200X400 | 400 mm | Basic (no mounting) | - · std seal · PT | $555.76 | |
| SCD200X400S | 400 mm | Basic (no mounting) | S · std seal · PT | $562.74 | |
| SCD200X450 | 450 mm | Basic (no mounting) | - · std seal · PT | $586.00 | |
| SCD200X450S | 450 mm | Basic (no mounting) | S · std seal · PT | $592.98 | |
| SCD200X500 | 500 mm | Basic (no mounting) | - · std seal · PT | $616.25 | |
| SCD200X500S | 500 mm | Basic (no mounting) | S · std seal · PT | $623.22 | |
| SCD200X600 | 600 mm | Basic (no mounting) | - · std seal · PT | $678.34 | |
| SCD200X600S | 600 mm | Basic (no mounting) | S · std seal · PT | $685.32 | |
| SCD200X700 | 700 mm | Basic (no mounting) | - · std seal · PT | $740.22 | |
| SCD200X700S | 700 mm | Basic (no mounting) | S · std seal · PT | $747.20 | |
| SCD200X800 | 800 mm | Basic (no mounting) | - · std seal · PT | $803.75 | |
| SCD200X800S | 800 mm | Basic (no mounting) | S · std seal · PT | $810.73 | |
| SCD200X900 | 900 mm | Basic (no mounting) | - · std seal · PT | $867.24 | |
| SCD200X900S | 900 mm | Basic (no mounting) | S · std seal · PT | $874.22 | |
| SCD200X1000 | 1000 mm | Basic (no mounting) | - · std seal · PT | $930.77 | |
| SCD200X1000S | 1000 mm | Basic (no mounting) | S · std seal · PT | $937.76 |
Need a combination that is not listed? Request a quote.
Over 15.1 kN at 0.5 MPa for presses, lifting tables and dampers.
Opens chutes, gates and dampers on bulk-handling equipment.
Clevis and trunnion versions swing large doors and platforms.
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Every code on this page is the basic version without a mounting code: the cylinder is fixed through its own mounting holes.
Finally pick the version: S adds a magnet for position sensors; the standard seal suits general automation.
No. Every SCD200 gives about 15080 N in both directions at 0.5 MPa, whatever the stroke.
3/4" ports, PT thread as standard.
Every code on this page is the basic version without a mounting code; the cylinder is fixed through its own mounting holes.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SCD200. Orders are processed and handed to the carrier within 3-5 business days.
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.