AirTAC MPE Threaded Cylinder, Single Acting, Ø6 to Ø16
Every stocked AirTAC MPE on one page: 30 order codes in 5 bore sizes, from $15.78. Pick the bore, stroke and rod end to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MPE
The AirTAC MPE is a single-acting, push-type cylinder with a fully threaded body in Ø6 to Ø16 mm bores and 5, 10 or 15 mm strokes: air pushes the rod out and a spring returns it. It is the standard type: the threaded body passes through a panel and is clamped by its nuts, so it needs no mounting accessory.
It is small and light, and several can be fitted close together as a module to save space. The body is nickel-plated brass and the rod stainless steel.
MPE Technical Specifications
| Model | MPE |
|---|---|
| Action | Single acting, push type |
| Mounting | Standard (panel, with nuts) |
| Strokes | 5, 10, 15 mm |
| Ø6 | rod Ø3 mm · push 10.3 N · spring return 1.6 N |
| Ø8 | rod Ø4 mm · push 19.9 N · spring return 2.7 N |
| Ø10 | rod Ø5 mm · push 33 N · spring return 2.8 N |
| Ø12 | rod Ø6 mm · push 47.2 N · spring return 3.45 N |
| Ø16 | rod Ø6 mm · push 89.7 N · spring return 4.8 N |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.2-0.7 MPa (Ø6), 0.15-0.7 MPa (Ø8 and up) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Piston speed | 50-500 mm/s |
| Cushion | None |
| Port | M5×0.8 |
| Body / rod | Brass, nickel-plated / stainless steel |
Source: AirTAC Products Catalog 2026A (PDF01-P0512..P0513), MPE series theoretical force, specifications, strokes and ordering code.
How the MPE Order Code Is Built
| MPE | Threaded cylinder, single acting push type |
|---|---|
| 6 / 8 / 10 / 12 / 16 | Bore (mm) |
| ×5 / 10 / 15 | Stroke (mm) |
| N | Plain rod (blank = male thread) |
All AirTAC MPE Order Codes (30)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Bore | Stroke | Rod end | Price | Select |
|---|---|---|---|---|---|
| MPE6X5 | Ø6 mm | 5 mm | Male thread | $15.78 | |
| MPE6X5N | Ø6 mm | 5 mm | Plain rod (N) | $15.78 | |
| MPE6X10 | Ø6 mm | 10 mm | Male thread | $16.51 | |
| MPE6X10N | Ø6 mm | 10 mm | Plain rod (N) | $16.51 | |
| MPE6X15 | Ø6 mm | 15 mm | Male thread | $17.17 | |
| MPE6X15N | Ø6 mm | 15 mm | Plain rod (N) | $17.17 | |
| MPE8X5 | Ø8 mm | 5 mm | Male thread | $17.17 | |
| MPE8X5N | Ø8 mm | 5 mm | Plain rod (N) | $17.17 | |
| MPE8X10 | Ø8 mm | 10 mm | Male thread | $18.11 | |
| MPE8X10N | Ø8 mm | 10 mm | Plain rod (N) | $18.11 | |
| MPE8X15 | Ø8 mm | 15 mm | Male thread | $19.04 | |
| MPE8X15N | Ø8 mm | 15 mm | Plain rod (N) | $19.04 | |
| MPE10X5 | Ø10 mm | 5 mm | Male thread | $19.04 | |
| MPE10X5N | Ø10 mm | 5 mm | Plain rod (N) | $19.04 | |
| MPE10X10 | Ø10 mm | 10 mm | Male thread | $20.23 | |
| MPE10X10N | Ø10 mm | 10 mm | Plain rod (N) | $20.23 | |
| MPE10X15 | Ø10 mm | 15 mm | Male thread | $21.37 | |
| MPE10X15N | Ø10 mm | 15 mm | Plain rod (N) | $21.37 | |
| MPE12X5 | Ø12 mm | 5 mm | Male thread | $20.43 | |
| MPE12X5N | Ø12 mm | 5 mm | Plain rod (N) | $20.43 | |
| MPE12X10 | Ø12 mm | 10 mm | Male thread | $21.62 | |
| MPE12X10N | Ø12 mm | 10 mm | Plain rod (N) | $21.62 | |
| MPE12X15 | Ø12 mm | 15 mm | Male thread | $22.76 | |
| MPE12X15N | Ø12 mm | 15 mm | Plain rod (N) | $22.76 | |
| MPE16X5 | Ø16 mm | 5 mm | Male thread | $22.29 | |
| MPE16X5N | Ø16 mm | 5 mm | Plain rod (N) | $22.29 | |
| MPE16X10 | Ø16 mm | 10 mm | Male thread | $23.69 | |
| MPE16X10N | Ø16 mm | 10 mm | Plain rod (N) | $23.69 | |
| MPE16X15 | Ø16 mm | 15 mm | Male thread | $25.08 | |
| MPE16X15N | Ø16 mm | 15 mm | Plain rod (N) | $25.08 |
Need a combination that is not listed? Request a quote.
Where the MPE Is Used
Ejectors and pushers
Pushes small parts off a fixture or out of a die.
Multi-point modules
Several units fit close together in a plate.
Small clamps
A short push that holds a light part in place.
Choosing the Right MPE Configuration
Choose the bore by the push force you need at 0.5 MPa: Ø6 10.3 N, Ø8 19.9 N, Ø10 33 N, Ø12 47.2 N, Ø16 89.7 N.
Then the stroke: 5, 10 or 15 mm (maximum 15 mm, tolerance +1.0/0 mm).
Rod end: blank is a male thread, N a plain rod.
AirTAC MPE FAQ
Push force at 0.5 MPa: Ø6 10.3 N, Ø8 19.9 N, Ø10 33 N, Ø12 47.2 N, Ø16 89.7 N. The spring return force is Ø6 1.6 N, Ø8 2.7 N, Ø10 2.8 N, Ø12 3.45 N, Ø16 4.8 N.
MPE is the standard type, mounted through a panel with its nuts. MPEF is the embedded type, fitted into a hole in the fixture block. Both are single acting, push type.
No. The MPE has no magnet option and no cushion.
0.2-0.7 MPa on Ø6, 0.15-0.7 MPa on Ø8 and up, proof pressure 1.2 MPa, -20 to +70 °C, piston speed 50-500 mm/s. Port M5×0.8.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MPE from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the MPE
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.