AirTAC MAC50 Cushioned Mini Cylinder, 50 mm Bore
Every AirTAC MAC50 configuration on one page: 123 stock order codes with strokes from 5 to 750 mm and 4 cover/mounting combinations, from $68.36. Pick a stroke, cover and mounting and version to see the exact order code and price.
S · PT
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC MAC50
The AirTAC MAC50 is a double-acting stainless-steel mini cylinder with adjustable cushions with a 50 mm bore and a 16 mm piston rod. At 0.5 MPa it pushes 982 N and pulls 881 N; at 0.7 MPa that rises to 1374 N push and 1234 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All MAC50 versions share 1/4" air ports, an M14×1.5 rod thread and adjustable air cushions at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 123 stock order codes with strokes from 5 to 750 mm; the catalog maximum stroke is 500 mm, and the longer codes are non-standard strokes we already supply.
MAC50 Technical Specifications
| Bore size | Ø50 mm |
|---|---|
| Stock strokes | 5 – 750 mm |
| Catalog maximum stroke | 500 mm (longer on request) |
| Acting type | Double acting |
| Port size | 1/4" (PT standard) |
| Piston rod / rod thread | Ø16 mm / M14×1.5 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion |
Source: AirTAC Products Catalog 2026A (PDF01-P0455), MA (MAC cushioned) series ordering code and specifications.
Theoretical output force (Ø50 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
Push = pressure × bore area; pull subtracts the Ø16 mm rod area. Usable force is lower because of friction and back-pressure.
How the MAC50 Order Code Is Built
| MAC50 | Series and bore (50 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| CA / CM / U | Back cover: CA clevis-end cover; CM round-end cover; U flat-end cover |
| FA / LB / SDB | Mounting: FA front flange; LB foot bracket; SDB rear pivot bracket (blank = none) |
| G / T | Port thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC MAC50 Order Codes (123)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Back cover · Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| MAC50X5SCA | 5 mm | CA clevis-end cover | S · PT | $68.36 | |
| MAC50X10SCA | 10 mm | CA clevis-end cover | S · PT | $68.36 | |
| MAC50X10SU | 10 mm | U flat-end cover | S · PT | $68.36 | |
| MAC50X15SCA | 15 mm | CA clevis-end cover | S · PT | $68.36 | |
| MAC50X15SCM | 15 mm | CM round-end cover | S · PT | $68.36 | |
| MAC50X15SU | 15 mm | U flat-end cover | S · PT | $68.36 | |
| MAC50X20SCA | 20 mm | CA clevis-end cover | S · PT | $68.36 | |
| MAC50X20SCM | 20 mm | CM round-end cover | S · PT | $68.36 | |
| MAC50X20SU | 20 mm | U flat-end cover | S · PT | $68.36 | |
| MAC50X25SCA | 25 mm | CA clevis-end cover | S · PT | $68.36 | |
| MAC50X25SCM | 25 mm | CM round-end cover | S · PT | $68.36 | |
| MAC50X25SU | 25 mm | U flat-end cover | S · PT | $68.36 | |
| MAC50X30SCA | 30 mm | CA clevis-end cover | S · PT | $70.68 | |
| MAC50X30SCM | 30 mm | CM round-end cover | S · PT | $70.68 | |
| MAC50X30SU | 30 mm | U flat-end cover | S · PT | $70.68 | |
| MAC50X35SCA | 35 mm | CA clevis-end cover | S · PT | $70.68 | |
| MAC50X35SU | 35 mm | U flat-end cover | S · PT | $70.68 | |
| MAC50X40SCA | 40 mm | CA clevis-end cover | S · PT | $70.68 | |
| MAC50X40SCM | 40 mm | CM round-end cover | S · PT | $70.68 | |
| MAC50X40SU | 40 mm | U flat-end cover | S · PT | $70.68 | |
| MAC50X45SCA | 45 mm | CA clevis-end cover | S · PT | $70.68 | |
| MAC50X50SCA | 50 mm | CA clevis-end cover | S · PT | $70.68 | |
| MAC50X50SCM | 50 mm | CM round-end cover | S · PT | $70.68 | |
| MAC50X50SU | 50 mm | U flat-end cover | S · PT | $70.68 | |
| MAC50X55SCA | 55 mm | CA clevis-end cover | S · PT | $74.66 | |
| MAC50X55SU | 55 mm | U flat-end cover | S · PT | $74.66 | |
| MAC50X60SCA | 60 mm | CA clevis-end cover | S · PT | $74.66 | |
| MAC50X60SCM | 60 mm | CM round-end cover | S · PT | $74.66 | |
| MAC50X60SU | 60 mm | U flat-end cover | S · PT | $74.66 | |
| MAC50X65SCA | 65 mm | CA clevis-end cover | S · PT | $74.66 | |
| MAC50X65SU | 65 mm | U flat-end cover | S · PT | $74.66 | |
| MAC50X70SCA | 70 mm | CA clevis-end cover | S · PT | $74.66 | |
| MAC50X70SU | 70 mm | U flat-end cover | S · PT | $74.66 | |
| MAC50X75SCA | 75 mm | CA clevis-end cover | S · PT | $74.66 | |
| MAC50X75SCM | 75 mm | CM round-end cover | S · PT | $74.66 | |
| MAC50X75SU | 75 mm | U flat-end cover | S · PT | $74.66 | |
| MAC50X80SCA | 80 mm | CA clevis-end cover | S · PT | $78.59 | |
| MAC50X80SCM | 80 mm | CM round-end cover | S · PT | $78.59 | |
| MAC50X80SU | 80 mm | U flat-end cover | S · PT | $78.59 | |
| MAC50X90SCA | 90 mm | CA clevis-end cover | S · PT | $78.59 | |
| MAC50X90SU | 90 mm | U flat-end cover | S · PT | $78.59 | |
| MAC50X100SCA | 100 mm | CA clevis-end cover | S · PT | $78.59 | |
| MAC50X100SCASDB | 100 mm | CA clevis-end cover + SDB rear pivot bracket | S · PT | $82.78 | |
| MAC50X100SCM | 100 mm | CM round-end cover | S · PT | $78.59 | |
| MAC50X100SU | 100 mm | U flat-end cover | S · PT | $78.59 | |
| MAC50X105SCA | 105 mm | CA clevis-end cover | S · PT | $82.11 | |
| MAC50X110SCA | 110 mm | CA clevis-end cover | S · PT | $82.11 | |
| MAC50X110SU | 110 mm | U flat-end cover | S · PT | $82.11 | |
| MAC50X115SCA | 115 mm | CA clevis-end cover | S · PT | $82.11 | |
| MAC50X120SCA | 120 mm | CA clevis-end cover | S · PT | $82.11 | |
| MAC50X125SCA | 125 mm | CA clevis-end cover | S · PT | $82.11 | |
| MAC50X125SCM | 125 mm | CM round-end cover | S · PT | $82.11 | |
| MAC50X125SU | 125 mm | U flat-end cover | S · PT | $82.11 | |
| MAC50X130SCA | 130 mm | CA clevis-end cover | S · PT | $86.04 | |
| MAC50X135SCA | 135 mm | CA clevis-end cover | S · PT | $86.04 | |
| MAC50X140SCA | 140 mm | CA clevis-end cover | S · PT | $86.04 | |
| MAC50X140SCM | 140 mm | CM round-end cover | S · PT | $86.04 | |
| MAC50X150SCA | 150 mm | CA clevis-end cover | S · PT | $86.04 | |
| MAC50X150SCM | 150 mm | CM round-end cover | S · PT | $86.04 | |
| MAC50X150SU | 150 mm | U flat-end cover | S · PT | $86.04 | |
| MAC50X160SCA | 160 mm | CA clevis-end cover | S · PT | $89.76 | |
| MAC50X160SCM | 160 mm | CM round-end cover | S · PT | $89.76 | |
| MAC50X160SU | 160 mm | U flat-end cover | S · PT | $89.76 | |
| MAC50X165SCM | 165 mm | CM round-end cover | S · PT | $89.76 | |
| MAC50X175SCA | 175 mm | CA clevis-end cover | S · PT | $89.76 | |
| MAC50X175SCM | 175 mm | CM round-end cover | S · PT | $89.76 | |
| MAC50X175SU | 175 mm | U flat-end cover | S · PT | $89.76 | |
| MAC50X180SCA | 180 mm | CA clevis-end cover | S · PT | $93.74 | |
| MAC50X185SU | 185 mm | U flat-end cover | S · PT | $93.74 | |
| MAC50X190SCA | 190 mm | CA clevis-end cover | S · PT | $93.74 | |
| MAC50X195SCA | 195 mm | CA clevis-end cover | S · PT | $93.74 | |
| MAC50X200SCA | 200 mm | CA clevis-end cover | S · PT | $93.74 | |
| MAC50X200SCASDB | 200 mm | CA clevis-end cover + SDB rear pivot bracket | S · PT | $97.93 | |
| MAC50X200SCM | 200 mm | CM round-end cover | S · PT | $93.74 | |
| MAC50X200SU | 200 mm | U flat-end cover | S · PT | $93.74 | |
| MAC50X220SCA | 220 mm | CA clevis-end cover | S · PT | $97.67 | |
| MAC50X225SCA | 225 mm | CA clevis-end cover | S · PT | $97.67 | |
| MAC50X225SCM | 225 mm | CM round-end cover | S · PT | $97.67 | |
| MAC50X225SU | 225 mm | U flat-end cover | S · PT | $97.67 | |
| MAC50X230SU | 230 mm | U flat-end cover | S · PT | $101.19 | |
| MAC50X240SCA | 240 mm | CA clevis-end cover | S · PT | $101.19 | |
| MAC50X250SCA | 250 mm | CA clevis-end cover | S · PT | $101.19 | |
| MAC50X250SCM | 250 mm | CM round-end cover | S · PT | $101.19 | |
| MAC50X250SU | 250 mm | U flat-end cover | S · PT | $101.19 | |
| MAC50X260SU | 260 mm | U flat-end cover | S · PT | $109.10 | |
| MAC50X270SCM | 270 mm | CM round-end cover | S · PT | $109.10 | |
| MAC50X275SCA | 275 mm | CA clevis-end cover | S · PT | $109.10 | |
| MAC50X280SCA | 280 mm | CA clevis-end cover | S · PT | $109.10 | |
| MAC50X290SCA | 290 mm | CA clevis-end cover | S · PT | $109.10 | |
| MAC50X290SCM | 290 mm | CM round-end cover | S · PT | $109.10 | |
| MAC50X300SCA | 300 mm | CA clevis-end cover | S · PT | $109.10 | |
| MAC50X300SCM | 300 mm | CM round-end cover | S · PT | $109.10 | |
| MAC50X300SU | 300 mm | U flat-end cover | S · PT | $109.10 | |
| MAC50X325SCA | 325 mm | CA clevis-end cover | S · PT | $117.01 | |
| MAC50X350SCA | 350 mm | CA clevis-end cover | S · PT | $117.01 | |
| MAC50X350SCM | 350 mm | CM round-end cover | S · PT | $117.01 | |
| MAC50X350SU | 350 mm | U flat-end cover | S · PT | $117.01 | |
| MAC50X365SCA | 365 mm | CA clevis-end cover | S · PT | $125.38 | |
| MAC50X400SCA | 400 mm | CA clevis-end cover | S · PT | $125.38 | |
| MAC50X400SCM | 400 mm | CM round-end cover | S · PT | $125.38 | |
| MAC50X400SU | 400 mm | U flat-end cover | S · PT | $125.38 | |
| MAC50X410SU | 410 mm | U flat-end cover | S · PT | $133.29 | |
| MAC50X420SU | 420 mm | U flat-end cover | S · PT | $133.29 | |
| MAC50X425SCA | 425 mm | CA clevis-end cover | S · PT | $133.29 | |
| MAC50X440SU | 440 mm | U flat-end cover | S · PT | $133.29 | |
| MAC50X450SCA | 450 mm | CA clevis-end cover | S · PT | $133.29 | |
| MAC50X450SCASDB | 450 mm | CA clevis-end cover + SDB rear pivot bracket | S · PT | $137.48 | |
| MAC50X450SCM | 450 mm | CM round-end cover | S · PT | $133.29 | |
| MAC50X450SU | 450 mm | U flat-end cover | S · PT | $133.29 | |
| MAC50X500SCA | 500 mm | CA clevis-end cover | S · PT | $141.20 | |
| MAC50X500SCM | 500 mm | CM round-end cover | S · PT | $141.20 | |
| MAC50X500SU | 500 mm | U flat-end cover | S · PT | $141.20 | |
| MAC50X550SCA | 550 mm | CA clevis-end cover | S · PT | $149.58 | |
| MAC50X550SCM | 550 mm | CM round-end cover | S · PT | $149.58 | |
| MAC50X550SU | 550 mm | U flat-end cover | S · PT | $149.58 | |
| MAC50X580SCA | 580 mm | CA clevis-end cover | S · PT | $157.95 | |
| MAC50X600SCA | 600 mm | CA clevis-end cover | S · PT | $157.95 | |
| MAC50X600SCM | 600 mm | CM round-end cover | S · PT | $157.95 | |
| MAC50X600SU | 600 mm | U flat-end cover | S · PT | $157.95 | |
| MAC50X650SCA | 650 mm | CA clevis-end cover | S · PT | $166.32 | |
| MAC50X700SCA | 700 mm | CA clevis-end cover | S · PT | $174.70 | |
| MAC50X700SU | 700 mm | U flat-end cover | S · PT | $174.70 | |
| MAC50X750SCA | 750 mm | CA clevis-end cover | S · PT | $183.07 |
Need a combination that is not listed? Request a quote.
Where the MAC50 Is Used
General automation
About 982 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right MAC50 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the back cover and mounting. The back cover sets how the rear of the cylinder is fixed or where its air enters (CA clevis-end cover, CM round-end cover, U flat-end cover). Mounting brackets on this page: SDB rear pivot bracket. A clevis-end cover with an SDB pivot bracket lets the cylinder swing; flat or round covers with an FA flange or LB foot hold it rigid.
Finally pick the version: S adds a magnet for position sensors.
AirTAC MAC50 FAQ
No. Every MAC50 gives about 982 N push and 881 N pull at 0.5 MPa, whatever the stroke.
1/4" ports, PT thread as standard.
Back covers: CA clevis-end cover, CM round-end cover, U flat-end cover. Brackets: SDB rear pivot bracket. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single MAC50. Orders are processed and handed to the carrier within 3-5 business days.
Buying the MAC50 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-28.
Request a Quote for the MAC50
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.