AirTAC JSI32 Standard Air Cylinder, 32 mm Bore
Every AirTAC JSI32 configuration on one page: 127 stock order codes with strokes from 5 to 1000 mm and 6 mountings, from $43.23. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC JSI32
The AirTAC JSI32 is a double-acting standard air cylinder with a 32 mm bore and a 12 mm piston rod. At 0.5 MPa it pushes 402 N and pulls 346 N; at 0.7 MPa that rises to 563 N push and 484 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All JSI32 versions share 1/8" air ports, an M10×1.25 rod thread and 20 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 127 stock order codes with strokes from 5 to 1000 mm; the catalog maximum stroke is 1000 mm.
JSI32 Technical Specifications
| Bore size | Ø32 mm |
|---|---|
| Stock strokes | 5 – 1000 mm |
| Catalog maximum stroke | 1000 mm (longer on request) |
| Acting type | Double acting |
| Port size | 1/8" (PT standard) |
| Piston rod / rod thread | Ø12 mm / M10×1.25 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable air cushion, 20 mm |
Source: AirTAC Products Catalog 2026A (PDF01-P0420), JSI series ordering code and specifications.
Theoretical output force (Ø32 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
Push = pressure × bore area; pull subtracts the Ø12 mm rod area. Usable force is lower because of friction and back-pressure.
How the JSI32 Order Code Is Built
| JSI32 | Series and bore (32 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| LB / FA / FB / CA / CB / CR / TC | Mounting: LB foot; FA front flange; FB rear flange; CA single clevis; CB double clevis; CR rear pin clevis; TC center trunnion (blank = none) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC JSI32 Order Codes (127)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Thread | Price | Select |
|---|---|---|---|---|---|
| JSI32X5 | 5 mm | Basic (no mounting) | - · PT | $43.23 | |
| JSI32X5S | 5 mm | Basic (no mounting) | S · PT | $46.02 | |
| JSI32X10 | 10 mm | Basic (no mounting) | - · PT | $43.23 | |
| JSI32X15 | 15 mm | Basic (no mounting) | - · PT | $43.23 | |
| JSI32X16 | 16 mm | Basic (no mounting) | - · PT | $43.23 | |
| JSI32X16S | 16 mm | Basic (no mounting) | S · PT | $46.02 | |
| JSI32X20 | 20 mm | Basic (no mounting) | - · PT | $43.23 | |
| JSI32X20S | 20 mm | Basic (no mounting) | S · PT | $46.02 | |
| JSI32X25 | 25 mm | Basic (no mounting) | - · PT | $43.23 | |
| JSI32X25S | 25 mm | Basic (no mounting) | S · PT | $46.02 | |
| JSI32X25FA | 25 mm | FA front flange | - · PT | $49.28 | |
| JSI32X25TC | 25 mm | TC center trunnion | - · PT | $66.50 | |
| JSI32X30 | 30 mm | Basic (no mounting) | - · PT | $44.16 | |
| JSI32X30S | 30 mm | Basic (no mounting) | S · PT | $46.95 | |
| JSI32X30STC | 30 mm | TC center trunnion | S · PT | $70.22 | |
| JSI32X35S | 35 mm | Basic (no mounting) | S · PT | $46.95 | |
| JSI32X36S | 36 mm | Basic (no mounting) | S · PT | $46.95 | |
| JSI32X40 | 40 mm | Basic (no mounting) | - · PT | $44.16 | |
| JSI32X40S | 40 mm | Basic (no mounting) | S · PT | $46.95 | |
| JSI32X45S | 45 mm | Basic (no mounting) | S · PT | $46.95 | |
| JSI32X50 | 50 mm | Basic (no mounting) | - · PT | $44.16 | |
| JSI32X50S | 50 mm | Basic (no mounting) | S · PT | $46.95 | |
| JSI32X50FA | 50 mm | FA front flange | - · PT | $50.21 | |
| JSI32X50FB | 50 mm | FB rear flange | - · PT | $50.21 | |
| JSI32X50TC | 50 mm | TC center trunnion | - · PT | $67.43 | |
| JSI32X50STC | 50 mm | TC center trunnion | S · PT | $70.22 | |
| JSI32X60 | 60 mm | Basic (no mounting) | - · PT | $45.82 | |
| JSI32X60S | 60 mm | Basic (no mounting) | S · PT | $48.61 | |
| JSI32X70 | 70 mm | Basic (no mounting) | - · PT | $45.82 | |
| JSI32X70S | 70 mm | Basic (no mounting) | S · PT | $48.61 | |
| JSI32X75 | 75 mm | Basic (no mounting) | - · PT | $45.82 | |
| JSI32X75S | 75 mm | Basic (no mounting) | S · PT | $48.61 | |
| JSI32X75TC | 75 mm | TC center trunnion | - · PT | $69.08 | |
| JSI32X80 | 80 mm | Basic (no mounting) | - · PT | $47.42 | |
| JSI32X80S | 80 mm | Basic (no mounting) | S · PT | $50.21 | |
| JSI32X80SLB | 80 mm | LB foot | S · PT | $53.47 | |
| JSI32X80SCA | 80 mm | CA single clevis | S · PT | $57.65 | |
| JSI32X80STC | 80 mm | TC center trunnion | S · PT | $73.47 | |
| JSI32X85S | 85 mm | Basic (no mounting) | S · PT | $50.21 | |
| JSI32X90 | 90 mm | Basic (no mounting) | - · PT | $47.42 | |
| JSI32X90S | 90 mm | Basic (no mounting) | S · PT | $50.21 | |
| JSI32X90STC | 90 mm | TC center trunnion | S · PT | $73.47 | |
| JSI32X100 | 100 mm | Basic (no mounting) | - · PT | $47.42 | |
| JSI32X100S | 100 mm | Basic (no mounting) | S · PT | $50.21 | |
| JSI32X100SLB | 100 mm | LB foot | S · PT | $53.47 | |
| JSI32X100FA | 100 mm | FA front flange | - · PT | $53.47 | |
| JSI32X100STC | 100 mm | TC center trunnion | S · PT | $73.47 | |
| JSI32X120 | 120 mm | Basic (no mounting) | - · PT | $49.08 | |
| JSI32X120S | 120 mm | Basic (no mounting) | S · PT | $51.87 | |
| JSI32X125 | 125 mm | Basic (no mounting) | - · PT | $49.08 | |
| JSI32X125S | 125 mm | Basic (no mounting) | S · PT | $51.87 | |
| JSI32X130S | 130 mm | Basic (no mounting) | S · PT | $53.26 | |
| JSI32X135 | 135 mm | Basic (no mounting) | - · PT | $50.47 | |
| JSI32X140S | 140 mm | Basic (no mounting) | S · PT | $53.26 | |
| JSI32X150 | 150 mm | Basic (no mounting) | - · PT | $50.47 | |
| JSI32X150S | 150 mm | Basic (no mounting) | S · PT | $53.26 | |
| JSI32X150TC | 150 mm | TC center trunnion | - · PT | $73.74 | |
| JSI32X160 | 160 mm | Basic (no mounting) | - · PT | $52.07 | |
| JSI32X160S | 160 mm | Basic (no mounting) | S · PT | $54.86 | |
| JSI32X160FA | 160 mm | FA front flange | - · PT | $58.12 | |
| JSI32X160FB | 160 mm | FB rear flange | - · PT | $58.12 | |
| JSI32X170 | 170 mm | Basic (no mounting) | - · PT | $52.07 | |
| JSI32X175 | 175 mm | Basic (no mounting) | - · PT | $52.07 | |
| JSI32X175S | 175 mm | Basic (no mounting) | S · PT | $54.86 | |
| JSI32X180 | 180 mm | Basic (no mounting) | - · PT | $53.47 | |
| JSI32X180S | 180 mm | Basic (no mounting) | S · PT | $56.26 | |
| JSI32X185S | 185 mm | Basic (no mounting) | S · PT | $56.26 | |
| JSI32X200 | 200 mm | Basic (no mounting) | - · PT | $53.47 | |
| JSI32X200S | 200 mm | Basic (no mounting) | S · PT | $56.26 | |
| JSI32X200STC | 200 mm | TC center trunnion | S · PT | $79.52 | |
| JSI32X210S | 210 mm | Basic (no mounting) | S · PT | $57.91 | |
| JSI32X220S | 220 mm | Basic (no mounting) | S · PT | $57.91 | |
| JSI32X225 | 225 mm | Basic (no mounting) | - · PT | $55.12 | |
| JSI32X225S | 225 mm | Basic (no mounting) | S · PT | $57.91 | |
| JSI32X230 | 230 mm | Basic (no mounting) | - · PT | $56.52 | |
| JSI32X230S | 230 mm | Basic (no mounting) | S · PT | $59.31 | |
| JSI32X240S | 240 mm | Basic (no mounting) | S · PT | $59.31 | |
| JSI32X250 | 250 mm | Basic (no mounting) | - · PT | $56.52 | |
| JSI32X250S | 250 mm | Basic (no mounting) | S · PT | $59.31 | |
| JSI32X250SFA | 250 mm | FA front flange | S · PT | $65.36 | |
| JSI32X250TC | 250 mm | TC center trunnion | - · PT | $79.78 | |
| JSI32X250STC | 250 mm | TC center trunnion | S · PT | $82.57 | |
| JSI32X270S | 270 mm | Basic (no mounting) | S · PT | $62.31 | |
| JSI32X270TC | 270 mm | TC center trunnion | - · PT | $82.78 | |
| JSI32X275S | 275 mm | Basic (no mounting) | S · PT | $62.31 | |
| JSI32X280 | 280 mm | Basic (no mounting) | - · PT | $59.52 | |
| JSI32X280S | 280 mm | Basic (no mounting) | S · PT | $62.31 | |
| JSI32X300 | 300 mm | Basic (no mounting) | - · PT | $59.52 | |
| JSI32X300S | 300 mm | Basic (no mounting) | S · PT | $62.31 | |
| JSI32X300TC | 300 mm | TC center trunnion | - · PT | $82.78 | |
| JSI32X320 | 320 mm | Basic (no mounting) | - · PT | $62.77 | |
| JSI32X320S | 320 mm | Basic (no mounting) | S · PT | $65.56 | |
| JSI32X325S | 325 mm | Basic (no mounting) | S · PT | $65.56 | |
| JSI32X350 | 350 mm | Basic (no mounting) | - · PT | $62.77 | |
| JSI32X350S | 350 mm | Basic (no mounting) | S · PT | $65.56 | |
| JSI32X350STC | 350 mm | TC center trunnion | S · PT | $88.83 | |
| JSI32X360S | 360 mm | Basic (no mounting) | S · PT | $68.62 | |
| JSI32X380S | 380 mm | Basic (no mounting) | S · PT | $68.62 | |
| JSI32X400 | 400 mm | Basic (no mounting) | - · PT | $65.83 | |
| JSI32X400S | 400 mm | Basic (no mounting) | S · PT | $68.62 | |
| JSI32X400STC | 400 mm | TC center trunnion | S · PT | $91.88 | |
| JSI32X450 | 450 mm | Basic (no mounting) | - · PT | $68.82 | |
| JSI32X450S | 450 mm | Basic (no mounting) | S · PT | $71.61 | |
| JSI32X450STC | 450 mm | TC center trunnion | S · PT | $94.88 | |
| JSI32X490S | 490 mm | Basic (no mounting) | S · PT | $74.66 | |
| JSI32X500 | 500 mm | Basic (no mounting) | - · PT | $71.87 | |
| JSI32X500S | 500 mm | Basic (no mounting) | S · PT | $74.66 | |
| JSI32X500STC | 500 mm | TC center trunnion | S · PT | $97.93 | |
| JSI32X530S | 530 mm | Basic (no mounting) | S · PT | $81.65 | |
| JSI32X550 | 550 mm | Basic (no mounting) | - · PT | $78.85 | |
| JSI32X550S | 550 mm | Basic (no mounting) | S · PT | $81.65 | |
| JSI32X560S | 560 mm | Basic (no mounting) | S · PT | $81.65 | |
| JSI32X570S | 570 mm | Basic (no mounting) | S · PT | $81.65 | |
| JSI32X600S | 600 mm | Basic (no mounting) | S · PT | $81.65 | |
| JSI32X600SFA | 600 mm | FA front flange | S · PT | $87.69 | |
| JSI32X600TC | 600 mm | TC center trunnion | - · PT | $102.11 | |
| JSI32X650S | 650 mm | Basic (no mounting) | S · PT | $88.62 | |
| JSI32X655TC | 655 mm | TC center trunnion | - · PT | $109.10 | |
| JSI32X700 | 700 mm | Basic (no mounting) | - · PT | $85.83 | |
| JSI32X700S | 700 mm | Basic (no mounting) | S · PT | $88.62 | |
| JSI32X700SLB | 700 mm | LB foot | S · PT | $91.88 | |
| JSI32X750S | 750 mm | Basic (no mounting) | S · PT | $95.60 | |
| JSI32X800S | 800 mm | Basic (no mounting) | S · PT | $95.60 | |
| JSI32X850S | 850 mm | Basic (no mounting) | S · PT | $102.58 | |
| JSI32X900 | 900 mm | Basic (no mounting) | - · PT | $99.79 | |
| JSI32X900S | 900 mm | Basic (no mounting) | S · PT | $102.58 | |
| JSI32X1000S | 1000 mm | Basic (no mounting) | S · PT | $109.56 |
Need a combination that is not listed? Request a quote.
Where the JSI32 Is Used
General automation
About 402 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Clamping fixtures
Rigid mountings hold the cylinder for clamps and presses.
Doors, gates and levers
Pivoting covers and brackets drive mechanisms that swing.
Choosing the Right JSI32 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with LB foot, FA front flange, FB rear flange, CA single clevis, TC center trunnion. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors.
AirTAC JSI32 FAQ
No. Every JSI32 gives about 402 N push and 346 N pull at 0.5 MPa, whatever the stroke.
1/8" ports, PT thread as standard.
Brackets: LB foot, FA front flange, FB rear flange, CA single clevis, TC center trunnion. Pick a pivoting cover or bracket when the load moves in an arc, a rigid one for straight-line loads.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single JSI32. Orders are processed and handed to the carrier within 3-5 business days.
Buying the JSI32 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-10-28.
Request a Quote for the JSI32
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.