Airtac JSI Series Standard Cylinder JSI32X200STC
The AirTAC Airtac JSI Series Standard Cylinder JSI32X200STC is a genuine double acting JIS-standard air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its no-tie-rod, hard-anodized profile barrel is more compact than an ISO 15552 cylinder of the same bore — a space-saver on tight machines.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 20 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac JSI Series Standard Cylinder JSI32X200STC
Designed to save valuable machine space, this JIS-standard profile cylinder is noticeably shorter than an equivalent ISO 15552 unit of the same 32 mm bore. The extruded, hard-anodized aluminum barrel features no external rods, relying instead on a two-way piston seal that retains grease for a long, low-friction service life in tight assemblies.
Operating double-acting on filtered air, it delivers 402 N of push force at 0.5 MPa through a G1/8 port. For real-world sizing, plan for about 241 N of actual work at that pressure, which translates to lifting roughly 20 kg vertically with a 2:1 safety margin. The built-in magnet (-S) allows CMSE or DMSE sensors to drop directly into the side grooves for position detection.
Airtac JSI Series Standard Cylinder JSI32X200STC Technical Specifications
| Model | Airtac JSI Series Standard Cylinder JSI32X200STC |
|---|---|
| Series | JSI JIS-standard profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 20 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC JSI (JIS standard) datasheet. Confirm against the product label before installation. Thread options: PT (blank) / G. Barrel: hard-anodized aluminum profile (no tie rods).
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac JSI Series Standard Cylinder JSI32X200STC
| JSI | JIS-standard profile cylinder (double-acting type). |
|---|---|
| 32 | Bore size in mm (32 / 40 / 50 / 63 / 80 / 100 / 125). |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensors. |
JSI-family variants: JSI (double acting), JSID (double rod), JSIJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / TCM1 / TCM2. Thread PT (blank) / G.
Where the Airtac JSI Series Standard Cylinder JSI32X200STC Is Used
Small Parts Ejection
Ideal for pushing lightweight plastic or aluminum components out of a machining fixture using its 402 N push force at 0.5 MPa over a 200 mm travel distance.
Compact Sorting Diverters
Fits into tight conveyor frameworks where a shorter JIS profile is required, using the built-in magnet to trigger DMSE sensors for rapid sorting cycles.
Light Clamping Mechanisms
Provides reliable clamping pressure for small electronic assembly stations, with the TC trunnion mount accommodating slight pivot requirements during actuation.
Is the Airtac JSI Series Standard Cylinder JSI32X200STC the Right Cylinder?
When sizing this 32 mm bore against the rest of the JSI family, it serves as the compact baseline; stepping up to the 40 mm bore increases the 0.5 MPa push force to 628 N if your load demands it. Because this is a 200 mm stroke, ensure your mechanism guides the load to prevent rod bending and premature seal wear from side-loading forces. The included TC trunnion mount helps absorb angular misalignment during long travel. Note that standard air cushions only decelerate the piston near the end caps; they do not function as a lock. If your application must hold a load vertically during air loss or valve centering, add an external rod lock or pilot-operated check valve to prevent drifting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac JSI Series Standard Cylinder JSI32X200STC FAQ
This 32 mm bore cylinder features a G1/8 port, a 12 mm rod, and M10x1.25 rod thread. It generates 402 N push and 345 N pull at 0.5 MPa, 563 N push and 483 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
It is a JIS-standard profile cylinder that is shorter and more compact than an ISO 15552 cylinder of the same 32 mm bore, offering space savings without sacrificing the 200 mm stroke length or adjustable air cushion performance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC JSI Cylinders
Request a Quote for Airtac JSI Series Standard Cylinder JSI32X200STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.