Every AirTAC SC200 configuration on one page: 201 stock order codes with strokes from 15 to 1850 mm, 6 mounting styles and 4 magnet, seal and thread versions, from $269.82. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
The AirTAC SC200 is a double-acting tie-rod cylinder with a 200 mm bore and a 40 mm piston rod. At 0.5 MPa it pushes 15708 N and pulls 15080 N; at 0.7 MPa that rises to 21991 N push and 21112 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SC200 versions share PT3/4 air ports, an M36×2 rod thread and 33 mm adjustable air cushions at both ends. The cylinder runs on filtered air between 0.15 and 1.0 MPa, from -20 to +70 °C, at 30 to 500 mm/s. As a big-bore SC it belongs to the ISO 6430 class, and its standard seals are NBR. This page lists 201 stock order codes with strokes from 15 to 1850 mm; catalog standard strokes run up to 1500 mm, and the longer codes are non-standard strokes we already supply.
| Bore size | Ø200 mm |
|---|---|
| Stock strokes | 15 – 1850 mm |
| Catalog standard stroke | up to 1500 mm (longer on request) |
| Acting type | Double acting |
| Port size | PT3/4 (G on request) |
| Piston rod / rod thread | Ø40 mm / M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 33 mm |
Source: AirTAC Products Catalog 2026A, SC series pages. Standard seal is NBR; H = FKM, N = NBR (N not offered above Ø100). Thread: blank = PT, G = G thread.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | 21111 N |
Push = pressure × bore area; pull subtracts the Ø40 mm rod area. Force does not depend on stroke. Usable force is lower because of friction and back-pressure.
| SC200 | Series and bore (mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| LB / FA / FB / CA / CB / TC | Foot, front flange, rear flange, single clevis, double clevis, center trunnion (blank = basic) |
| H / N | FKM or NBR seals (blank = NBR) |
| G | G port thread (blank = PT) |
Example: SC200X100SCA = Ø200 mm bore, 100 mm stroke, magnet, single clevis mounting.
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SC200X15 | 15 | - | - · NBR · PT | $269.82 | |
| SC200X20S | 20 | - | S · NBR · PT | $276.80 | |
| SC200X20 | 20 | - | - · NBR · PT | $269.82 | |
| SC200X25S | 25 | - | S · NBR · PT | $276.80 | |
| SC200X25 | 25 | - | - · NBR · PT | $269.82 | |
| SC200X25TC | 25 | TC | - · NBR · PT | $423.37 | |
| SC200X30S | 30 | - | S · NBR · PT | $286.11 | |
| SC200X30 | 30 | - | - · NBR · PT | $279.13 | |
| SC200X30STC | 30 | TC | S · NBR · PT | $439.65 | |
| SC200X35 | 35 | - | - · NBR · PT | $279.13 | |
| SC200X40S | 40 | - | S · NBR · PT | $286.11 | |
| SC200X40 | 40 | - | - · NBR · PT | $279.13 | |
| SC200X50S | 50 | - | S · NBR · PT | $286.11 | |
| SC200X50 | 50 | - | - · NBR · PT | $279.13 | |
| SC200X50FA | 50 | FA | - · NBR · PT | $383.82 | |
| SC200X50STC | 50 | TC | S · NBR · PT | $439.65 | |
| SC200X50TC | 50 | TC | - · NBR · PT | $432.67 | |
| SC200X55 | 55 | - | - · NBR · PT | $288.44 | |
| SC200X60S | 60 | - | S · NBR · PT | $295.41 | |
| SC200X60 | 60 | - | - · NBR · PT | $288.44 | |
| SC200X70H | 70 | - | - · FKM · PT | $381.49 | |
| SC200X70 | 70 | - | - · NBR · PT | $288.44 | |
| SC200X75S | 75 | - | S · NBR · PT | $295.41 | |
| SC200X75H | 75 | - | - · FKM · PT | $381.49 | |
| SC200X75 | 75 | - | - · NBR · PT | $288.44 | |
| SC200X75FA | 75 | FA | - · NBR · PT | $393.12 | |
| SC200X75TC | 75 | TC | - · NBR · PT | $441.98 | |
| SC200X80S | 80 | - | S · NBR · PT | $307.05 | |
| SC200X80 | 80 | - | - · NBR · PT | $300.07 | |
| SC200X80TC | 80 | TC | - · NBR · PT | $453.61 | |
| SC200X90S | 90 | - | S · NBR · PT | $307.05 | |
| SC200X90 | 90 | - | - · NBR · PT | $300.07 | |
| SC200X100S | 100 | - | S · NBR · PT | $307.05 | |
| SC200X100H | 100 | - | - · FKM · PT | $393.12 | |
| SC200X100 | 100 | - | - · NBR · PT | $300.07 | |
| SC200X100FA | 100 | FA | - · NBR · PT | $404.75 | |
| SC200X100STC | 100 | TC | S · NBR · PT | $460.59 | |
| SC200X100TC | 100 | TC | - · NBR · PT | $453.61 | |
| SC200X110S | 110 | - | S · NBR · PT | $318.68 | |
| SC200X110 | 110 | - | - · NBR · PT | $311.70 | |
| SC200X115STC | 115 | TC | S · NBR · PT | $472.22 | |
| SC200X120S | 120 | - | S · NBR · PT | $318.68 | |
| SC200X120 | 120 | - | - · NBR · PT | $311.70 | |
| SC200X125SH | 125 | - | S · FKM · PT | $411.73 | |
| SC200X125S | 125 | - | S · NBR · PT | $318.68 | |
| SC200X125 | 125 | - | - · NBR · PT | $311.70 | |
| SC200X125STC | 125 | TC | S · NBR · PT | $472.22 | |
| SC200X125TC | 125 | TC | - · NBR · PT | $465.24 | |
| SC200X135S | 135 | - | S · NBR · PT | $330.31 | |
| SC200X135 | 135 | - | - · NBR · PT | $323.33 | |
| SC200X140S | 140 | - | S · NBR · PT | $330.31 | |
| SC200X150S | 150 | - | S · NBR · PT | $330.31 | |
| SC200X150 | 150 | - | - · NBR · PT | $323.33 | |
| SC200X150SFA | 150 | FA | S · NBR · PT | $435.00 | |
| SC200X150TC | 150 | TC | - · NBR · PT | $476.87 | |
| SC200X160S | 160 | - | S · NBR · PT | $341.94 | |
| SC200X160 | 160 | - | - · NBR · PT | $334.96 | |
| SC200X160TC | 160 | TC | - · NBR · PT | $488.50 | |
| SC200X165S | 165 | - | S · NBR · PT | $341.94 | |
| SC200X170S | 170 | - | S · NBR · PT | $341.94 | |
| SC200X170 | 170 | - | - · NBR · PT | $334.96 | |
| SC200X170TC | 170 | TC | - · NBR · PT | $488.50 | |
| SC200X175S | 175 | - | S · NBR · PT | $341.94 | |
| SC200X175 | 175 | - | - · NBR · PT | $334.96 | |
| SC200X175STC | 175 | TC | S · NBR · PT | $495.48 | |
| SC200X175TC | 175 | TC | - · NBR · PT | $488.50 | |
| SC200X180 | 180 | - | - · NBR · PT | $346.59 | |
| SC200X190S | 190 | - | S · NBR · PT | $353.57 | |
| SC200X200SH | 200 | - | S · FKM · PT | $446.63 | |
| SC200X200S | 200 | - | S · NBR · PT | $353.57 | |
| SC200X200H | 200 | - | - · FKM · PT | $439.65 | |
| SC200X200 | 200 | - | - · NBR · PT | $346.59 | |
| SC200X200FA | 200 | FA | - · NBR · PT | $451.28 | |
| SC200X200SFB | 200 | FB | S · NBR · PT | $458.26 | |
| SC200X200CA | 200 | CA | - · NBR · PT | $451.28 | |
| SC200X200SCB | 200 | CB | S · NBR · PT | $472.22 | |
| SC200X200STC | 200 | TC | S · NBR · PT | $507.12 | |
| SC200X200TC | 200 | TC | - · NBR · PT | $500.13 | |
| SC200X210SH | 210 | - | S · FKM · PT | $458.26 | |
| SC200X210 | 210 | - | - · NBR · PT | $358.23 | |
| SC200X220S | 220 | - | S · NBR · PT | $365.20 | |
| SC200X220 | 220 | - | - · NBR · PT | $358.23 | |
| SC200X220TC | 220 | TC | - · NBR · PT | $511.77 | |
| SC200X225S | 225 | - | S · NBR · PT | $365.20 | |
| SC200X230S | 230 | - | S · NBR · PT | $376.84 | |
| SC200X230 | 230 | - | - · NBR · PT | $369.86 | |
| SC200X240S | 240 | - | S · NBR · PT | $376.84 | |
| SC200X240 | 240 | - | - · NBR · PT | $369.86 | |
| SC200X250SH | 250 | - | S · FKM · PT | $469.89 | |
| SC200X250S | 250 | - | S · NBR · PT | $376.84 | |
| SC200X250H | 250 | - | - · FKM · PT | $462.91 | |
| SC200X250 | 250 | - | - · NBR · PT | $369.86 | |
| SC200X250STC | 250 | TC | S · NBR · PT | $530.38 | |
| SC200X250TC | 250 | TC | - · NBR · PT | $523.40 | |
| SC200X260S | 260 | - | S · NBR · PT | $388.47 | |
| SC200X260 | 260 | - | - · NBR · PT | $381.49 | |
| SC200X260TC | 260 | TC | - · NBR · PT | $535.03 | |
| SC200X270 | 270 | - | - · NBR · PT | $381.49 | |
| SC200X275S | 275 | - | S · NBR · PT | $388.47 | |
| SC200X275 | 275 | - | - · NBR · PT | $381.49 | |
| SC200X280S | 280 | - | S · NBR · PT | $388.47 | |
| SC200X280 | 280 | - | - · NBR · PT | $381.49 | |
| SC200X280FA | 280 | FA | - · NBR · PT | $486.18 | |
| SC200X290 | 290 | - | - · NBR · PT | $381.49 | |
| SC200X300SH | 300 | - | S · FKM · PT | $481.52 | |
| SC200X300S | 300 | - | S · NBR · PT | $388.47 | |
| SC200X300H | 300 | - | - · FKM · PT | $474.55 | |
| SC200X300 | 300 | - | - · NBR · PT | $381.49 | |
| SC200X300FA | 300 | FA | - · NBR · PT | $486.18 | |
| SC200X300STC | 300 | TC | S · NBR · PT | $542.01 | |
| SC200X300TC | 300 | TC | - · NBR · PT | $535.03 | |
| SC200X310S | 310 | - | S · NBR · PT | $411.73 | |
| SC200X320 | 320 | - | - · NBR · PT | $404.75 | |
| SC200X345 | 345 | - | - · NBR · PT | $404.75 | |
| SC200X350SH | 350 | - | S · FKM · PT | $504.79 | |
| SC200X350S | 350 | - | S · NBR · PT | $411.73 | |
| SC200X350H | 350 | - | - · FKM · PT | $497.81 | |
| SC200X350 | 350 | - | - · NBR · PT | $404.75 | |
| SC200X350STC | 350 | TC | S · NBR · PT | $565.27 | |
| SC200X350TC | 350 | TC | - · NBR · PT | $558.30 | |
| SC200X375S | 375 | - | S · NBR · PT | $435.00 | |
| SC200X400SH | 400 | - | S · FKM · PT | $528.05 | |
| SC200X400S | 400 | - | S · NBR · PT | $435.00 | |
| SC200X400H | 400 | - | - · FKM · PT | $521.07 | |
| SC200X400 | 400 | - | - · NBR · PT | $428.02 | |
| SC200X400CA | 400 | CA | - · NBR · PT | $532.70 | |
| SC200X400STC | 400 | TC | S · NBR · PT | $588.54 | |
| SC200X400TC | 400 | TC | - · NBR · PT | $581.56 | |
| SC200X410S | 410 | - | S · NBR · PT | $458.26 | |
| SC200X420 | 420 | - | - · NBR · PT | $451.28 | |
| SC200X425S | 425 | - | S · NBR · PT | $458.26 | |
| SC200X425 | 425 | - | - · NBR · PT | $451.28 | |
| SC200X450SH | 450 | - | S · FKM · PT | $551.31 | |
| SC200X450S | 450 | - | S · NBR · PT | $458.26 | |
| SC200X450 | 450 | - | - · NBR · PT | $451.28 | |
| SC200X450SCB | 450 | CB | S · NBR · PT | $576.91 | |
| SC200X450TC | 450 | TC | - · NBR · PT | $604.82 | |
| SC200X470STC | 470 | TC | S · NBR · PT | $635.06 | |
| SC200X476S | 476 | - | S · NBR · PT | $481.52 | |
| SC200X480 | 480 | - | - · NBR · PT | $474.55 | |
| SC200X500SH | 500 | - | S · FKM · PT | $574.58 | |
| SC200X500S | 500 | - | S · NBR · PT | $481.52 | |
| SC200X500 | 500 | - | - · NBR · PT | $474.55 | |
| SC200X500STC | 500 | TC | S · NBR · PT | $635.06 | |
| SC200X500TC | 500 | TC | - · NBR · PT | $628.09 | |
| SC200X510 | 510 | - | - · NBR · PT | $522.26 | |
| SC200X525S | 525 | - | S · NBR · PT | $529.24 | |
| SC200X530 | 530 | - | - · NBR · PT | $522.26 | |
| SC200X550S | 550 | - | S · NBR · PT | $529.24 | |
| SC200X550 | 550 | - | - · NBR · PT | $522.26 | |
| SC200X560 | 560 | - | - · NBR · PT | $522.26 | |
| SC200X600SH | 600 | - | S · FKM · PT | $622.30 | |
| SC200X600S | 600 | - | S · NBR · PT | $529.24 | |
| SC200X600 | 600 | - | - · NBR · PT | $522.26 | |
| SC200X600STC | 600 | TC | S · NBR · PT | $682.78 | |
| SC200X600TC | 600 | TC | - · NBR · PT | $675.80 | |
| SC200X650S | 650 | - | S · NBR · PT | $576.91 | |
| SC200X650 | 650 | - | - · NBR · PT | $569.93 | |
| SC200X650TC | 650 | TC | - · NBR · PT | $723.47 | |
| SC200X700S | 700 | - | S · NBR · PT | $576.91 | |
| SC200X700 | 700 | - | - · NBR · PT | $569.93 | |
| SC200X700STC | 700 | TC | S · NBR · PT | $730.45 | |
| SC200X700TC | 700 | TC | - · NBR · PT | $723.47 | |
| SC200X730FA | 730 | FA | - · NBR · PT | $723.47 | |
| SC200X750S | 750 | - | S · NBR · PT | $625.76 | |
| SC200X750 | 750 | - | - · NBR · PT | $618.78 | |
| SC200X750FA | 750 | FA | - · NBR · PT | $723.47 | |
| SC200X800SH | 800 | - | S · FKM · PT | $718.81 | |
| SC200X800S | 800 | - | S · NBR · PT | $625.76 | |
| SC200X800 | 800 | - | - · NBR · PT | $618.78 | |
| SC200X800FA | 800 | FA | - · NBR · PT | $723.47 | |
| SC200X800STC | 800 | TC | S · NBR · PT | $779.30 | |
| SC200X800TC | 800 | TC | - · NBR · PT | $772.32 | |
| SC200X850S | 850 | - | S · NBR · PT | $674.62 | |
| SC200X850 | 850 | - | - · NBR · PT | $667.63 | |
| SC200X850CA | 850 | CA | - · NBR · PT | $772.32 | |
| SC200X900S | 900 | - | S · NBR · PT | $674.62 | |
| SC200X900 | 900 | - | - · NBR · PT | $667.63 | |
| SC200X900STC | 900 | TC | S · NBR · PT | $828.16 | |
| SC200X950S | 950 | - | S · NBR · PT | $723.47 | |
| SC200X950 | 950 | - | - · NBR · PT | $716.49 | |
| SC200X1000SH | 1000 | - | S · FKM · PT | $816.52 | |
| SC200X1000S | 1000 | - | S · NBR · PT | $723.47 | |
| SC200X1000 | 1000 | - | - · NBR · PT | $716.49 | |
| SC200X1000STC | 1000 | TC | S · NBR · PT | $877.01 | |
| SC200X1010S | 1010 | - | S · NBR · PT | $774.65 | |
| SC200X1050 | 1050 | - | - · NBR · PT | $767.67 | |
| SC200X1100S | 1100 | - | S · NBR · PT | $774.65 | |
| SC200X1100 | 1100 | - | - · NBR · PT | $767.67 | |
| SC200X1150 | 1150 | - | - · NBR · PT | $818.85 | |
| SC200X1200S | 1200 | - | S · NBR · PT | $825.83 | |
| SC200X1200 | 1200 | - | - · NBR · PT | $818.85 | |
| SC200X1200STC | 1200 | TC | S · NBR · PT | $979.37 | |
| SC200X1260S | 1260 | - | S · NBR · PT | $877.01 | |
| SC200X1300S | 1300 | - | S · NBR · PT | $877.01 | |
| SC200X1400S | 1400 | - | S · NBR · PT | $928.19 | |
| SC200X1400STC | 1400 | TC | S · NBR · PT | $1,081.73 | |
| SC200X1500 | 1500 | - | - · NBR · PT | $972.39 | |
| SC200X1550S | 1550 | - | S · NBR · PT | $1,030.55 | |
| SC200X1800 | 1800 | - | - · NBR · PT | $1,125.93 | |
| SC200X1850 | 1850 | - | - · NBR · PT | $1,177.12 |
Mounting: - = basic, LB = foot, FA = front flange, FB = rear flange, CA = single clevis, CB = double clevis, TC = center trunnion. Magnet: S = with magnet, - = without. Need a stroke or combination that is not listed? Request a quote.
Over 15.7 kN at 0.5 MPa for presses, lifting tables, dampers and valve actuation in heavy industry.
Big-bore tie-rod cylinders open chutes, gates and dampers on bulk material and process equipment.
Clevis and trunnion versions swing large doors, flaps and tilting platforms under high load.
Start with the stroke. Pick the exact travel your machine needs; a longer stroke than necessary adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) has threaded end-cover holes for your own bracket. This bore is stocked with FA front flange, FB rear flange, CA single clevis, CB double clevis, TC center trunnion. Foot and flange mountings fix the cylinder rigidly for straight-line motion; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version. Add the magnet (S) if you will fit position sensors on the tie rods. The standard NBR seal suits general automation; choose H (FKM) for higher temperatures or oil-contaminated air.
No. Output force depends on bore and air pressure. Every SC200 gives about 15708 N push and 15080 N pull at 0.5 MPa, whatever the stroke.
PT3/4 as standard.
Basic plus FA front flange, FB rear flange, CA single clevis, CB double clevis, TC center trunnion. Use foot or flange for straight-line loads, clevis or trunnion when the cylinder must pivot.
Blank means the standard NBR seal. H is FKM, for higher temperatures or oil in the air.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
No. You can order a single SC200. Orders are processed and handed to the carrier within 3-5 business days.
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
That is our time to process the order and hand it to the carrier. No minimum order: a single cylinder can be ordered.
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Send your load, stroke and mounting and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-09-27.
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.