
Every AirTAC SE125 configuration on one page: 210 order codes with strokes from 5 to 1800 mm, 5 mounting styles and magnet, seal and thread versions, from $198.89. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a listed order code. Request a quote and we will confirm availability and price.
The AirTAC SE125 is a double-acting ISO 15552 tie-rod-free standard cylinder with a 125 mm bore and a 32 mm piston rod. At 0.5 MPa it pushes 6136 N and pulls 5734 N; at 0.7 MPa that rises to 8590 N push and 8027 N pull. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SE125 versions share 1/2" air ports, an M27×2 rod thread and 40 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 500 mm/s. This page lists 210 order codes with strokes from 5 to 1800 mm; catalog standard strokes run up to 1500 mm, and the longer codes are non-standard strokes that we confirm with the quote.
The standard piston rod is medium carbon steel. Codes with A after the bore (SE125A...) use a SUS420J2 stainless rod and codes with B use SUS304, for wet, washdown or mildly corrosive environments.
| Bore size | Ø125 mm |
|---|---|
| Listed strokes | 5 – 1800 mm |
| Catalog standard stroke | up to 1500 mm (longer on request) |
| Acting type | Double acting |
| Port size | 1/2" (PT standard) |
| Piston rod / rod thread | Ø32 mm / M27×2 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
Source: AirTAC Products Catalog 2026A, SE series (ISO 15552). With FKM (H) seals the temperature range is 0 to +150 °C.
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | 8027 N |
Push = pressure × bore area; pull subtracts the Ø32 mm rod area. Usable force is lower because of friction and back-pressure.
| SE125 | Series and bore (125 mm) |
|---|---|
| A / B | Piston rod material: A = SUS420J2, B = SUS304 stainless steel, blank = medium carbon steel |
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| FB / CA / CB / FTC | Mounting: FB rear flange, CA single clevis, CB double clevis, FTC front trunnion |
| H / N | Seal: H = FKM, N = NBR (blank = standard seal) |
| G | Port thread: G = G (BSPP), blank = PT |
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Rod material · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SE125X5 | 5 mm | Basic (no mounting) | - · std seal · PT | $198.89 | |
| SE125X5S | 5 mm | Basic (no mounting) | S · std seal · PT | $204.94 | |
| SE125X10 | 10 mm | Basic (no mounting) | - · std seal · PT | $198.89 | |
| SE125X10S | 10 mm | Basic (no mounting) | S · std seal · PT | $204.94 | |
| SE125X15 | 15 mm | Basic (no mounting) | - · std seal · PT | $198.89 | |
| SE125X15S | 15 mm | Basic (no mounting) | S · std seal · PT | $204.94 | |
| SE125BX15SFB | 15 mm | FB rear flange | S · SUS304 rod (B) · std seal · PT | $313.56 | |
| SE125X20 | 20 mm | Basic (no mounting) | - · std seal · PT | $198.89 | |
| SE125X20S | 20 mm | Basic (no mounting) | S · std seal · PT | $204.94 | |
| SE125X25 | 25 mm | Basic (no mounting) | - · std seal · PT | $198.89 | |
| SE125X25S | 25 mm | Basic (no mounting) | S · std seal · PT | $204.94 | |
| SE125X25SFTC | 25 mm | FTC front trunnion | S · std seal · PT | $270.08 | |
| SE125X30 | 30 mm | Basic (no mounting) | - · std seal · PT | $204.94 | |
| SE125X30S | 30 mm | Basic (no mounting) | S · std seal · PT | $210.99 | |
| SE125X35 | 35 mm | Basic (no mounting) | - · std seal · PT | $204.94 | |
| SE125X35S | 35 mm | Basic (no mounting) | S · std seal · PT | $210.99 | |
| SE125X40 | 40 mm | Basic (no mounting) | - · std seal · PT | $204.94 | |
| SE125X40S | 40 mm | Basic (no mounting) | S · std seal · PT | $210.99 | |
| SE125X45 | 45 mm | Basic (no mounting) | - · std seal · PT | $204.94 | |
| SE125X45S | 45 mm | Basic (no mounting) | S · std seal · PT | $210.99 | |
| SE125X50 | 50 mm | Basic (no mounting) | - · std seal · PT | $204.94 | |
| SE125X50N | 50 mm | Basic (no mounting) | - · NBR · PT | $204.94 | |
| SE125X50S | 50 mm | Basic (no mounting) | S · std seal · PT | $210.99 | |
| SE125X50SH | 50 mm | Basic (no mounting) | S · FKM · PT | $257.52 | |
| SE125X55 | 55 mm | Basic (no mounting) | - · std seal · PT | $211.20 | |
| SE125X55S | 55 mm | Basic (no mounting) | S · std seal · PT | $217.24 | |
| SE125X60 | 60 mm | Basic (no mounting) | - · std seal · PT | $211.20 | |
| SE125X60S | 60 mm | Basic (no mounting) | S · std seal · PT | $217.24 | |
| SE125X65 | 65 mm | Basic (no mounting) | - · std seal · PT | $211.20 | |
| SE125X65S | 65 mm | Basic (no mounting) | S · std seal · PT | $217.24 | |
| SE125X70 | 70 mm | Basic (no mounting) | - · std seal · PT | $211.20 | |
| SE125X70S | 70 mm | Basic (no mounting) | S · std seal · PT | $217.24 | |
| SE125X75 | 75 mm | Basic (no mounting) | - · std seal · PT | $211.20 | |
| SE125X75S | 75 mm | Basic (no mounting) | S · std seal · PT | $217.24 | |
| SE125X75SN | 75 mm | Basic (no mounting) | S · NBR · PT | $217.24 | |
| SE125BX75 | 75 mm | Basic (no mounting) | - · SUS304 rod (B) · std seal · PT | $284.24 | |
| SE125BX75CA | 75 mm | CA single clevis | - · SUS304 rod (B) · std seal · PT | $331.96 | |
| SE125X80 | 80 mm | Basic (no mounting) | - · std seal · PT | $217.24 | |
| SE125X80S | 80 mm | Basic (no mounting) | S · std seal · PT | $223.30 | |
| SE125X80SCB | 80 mm | CB double clevis | S · std seal · PT | $276.80 | |
| SE125X82S | 82 mm | Basic (no mounting) | S · std seal · PT | $223.30 | |
| SE125X85 | 85 mm | Basic (no mounting) | - · std seal · PT | $217.24 | |
| SE125X85S | 85 mm | Basic (no mounting) | S · std seal · PT | $223.30 | |
| SE125X90 | 90 mm | Basic (no mounting) | - · std seal · PT | $217.24 | |
| SE125X90S | 90 mm | Basic (no mounting) | S · std seal · PT | $223.30 | |
| SE125X95 | 95 mm | Basic (no mounting) | - · std seal · PT | $217.24 | |
| SE125X95S | 95 mm | Basic (no mounting) | S · std seal · PT | $223.30 | |
| SE125X100 | 100 mm | Basic (no mounting) | - · std seal · PT | $217.24 | |
| SE125X100S | 100 mm | Basic (no mounting) | S · std seal · PT | $223.30 | |
| SE125BX100 | 100 mm | Basic (no mounting) | - · SUS304 rod (B) · std seal · PT | $295.88 | |
| SE125BX100S | 100 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $301.93 | |
| SE125X105 | 105 mm | Basic (no mounting) | - · std seal · PT | $226.55 | |
| SE125X105S | 105 mm | Basic (no mounting) | S · std seal · PT | $232.60 | |
| SE125X110 | 110 mm | Basic (no mounting) | - · std seal · PT | $226.55 | |
| SE125X110S | 110 mm | Basic (no mounting) | S · std seal · PT | $232.60 | |
| SE125X115 | 115 mm | Basic (no mounting) | - · std seal · PT | $226.55 | |
| SE125X115S | 115 mm | Basic (no mounting) | S · std seal · PT | $232.60 | |
| SE125X120 | 120 mm | Basic (no mounting) | - · std seal · PT | $226.55 | |
| SE125X120S | 120 mm | Basic (no mounting) | S · std seal · PT | $232.60 | |
| SE125X125 | 125 mm | Basic (no mounting) | - · std seal · PT | $226.55 | |
| SE125X125S | 125 mm | Basic (no mounting) | S · std seal · PT | $232.60 | |
| SE125X125SN | 125 mm | Basic (no mounting) | S · NBR · PT | $232.60 | |
| SE125BX125S | 125 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $317.07 | |
| SE125X130 | 130 mm | Basic (no mounting) | - · std seal · PT | $235.65 | |
| SE125X130S | 130 mm | Basic (no mounting) | S · std seal · PT | $241.70 | |
| SE125X135 | 135 mm | Basic (no mounting) | - · std seal · PT | $235.65 | |
| SE125X135S | 135 mm | Basic (no mounting) | S · std seal · PT | $241.70 | |
| SE125X140 | 140 mm | Basic (no mounting) | - · std seal · PT | $235.65 | |
| SE125X140S | 140 mm | Basic (no mounting) | S · std seal · PT | $241.70 | |
| SE125X145 | 145 mm | Basic (no mounting) | - · std seal · PT | $235.65 | |
| SE125X145S | 145 mm | Basic (no mounting) | S · std seal · PT | $241.70 | |
| SE125X150 | 150 mm | Basic (no mounting) | - · std seal · PT | $235.65 | |
| SE125X150S | 150 mm | Basic (no mounting) | S · std seal · PT | $241.70 | |
| SE125X150SN | 150 mm | Basic (no mounting) | S · NBR · PT | $241.70 | |
| SE125BX150 | 150 mm | Basic (no mounting) | - · SUS304 rod (B) · std seal · PT | $325.45 | |
| SE125BX150S | 150 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $331.50 | |
| SE125X155 | 155 mm | Basic (no mounting) | - · std seal · PT | $244.95 | |
| SE125X155S | 155 mm | Basic (no mounting) | S · std seal · PT | $251.00 | |
| SE125X160 | 160 mm | Basic (no mounting) | - · std seal · PT | $244.95 | |
| SE125X160N | 160 mm | Basic (no mounting) | - · NBR · PT | $244.95 | |
| SE125X160S | 160 mm | Basic (no mounting) | S · std seal · PT | $251.00 | |
| SE125BX160 | 160 mm | Basic (no mounting) | - · SUS304 rod (B) · std seal · PT | $340.34 | |
| SE125X160SCA | 160 mm | CA single clevis | S · std seal · PT | $298.67 | |
| SE125X160SCB | 160 mm | CB double clevis | S · std seal · PT | $304.51 | |
| SE125X165 | 165 mm | Basic (no mounting) | - · std seal · PT | $244.95 | |
| SE125X165S | 165 mm | Basic (no mounting) | S · std seal · PT | $251.00 | |
| SE125X170 | 170 mm | Basic (no mounting) | - · std seal · PT | $244.95 | |
| SE125X170S | 170 mm | Basic (no mounting) | S · std seal · PT | $251.00 | |
| SE125X175 | 175 mm | Basic (no mounting) | - · std seal · PT | $244.95 | |
| SE125X175S | 175 mm | Basic (no mounting) | S · std seal · PT | $251.00 | |
| SE125BX175 | 175 mm | Basic (no mounting) | - · SUS304 rod (B) · std seal · PT | $340.34 | |
| SE125BX175S | 175 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $346.39 | |
| SE125X180 | 180 mm | Basic (no mounting) | - · std seal · PT | $254.00 | |
| SE125X180S | 180 mm | Basic (no mounting) | S · std seal · PT | $260.05 | |
| SE125X180SN | 180 mm | Basic (no mounting) | S · NBR · PT | $260.05 | |
| SE125X185 | 185 mm | Basic (no mounting) | - · std seal · PT | $254.00 | |
| SE125X185S | 185 mm | Basic (no mounting) | S · std seal · PT | $260.05 | |
| SE125X190 | 190 mm | Basic (no mounting) | - · std seal · PT | $254.00 | |
| SE125X190S | 190 mm | Basic (no mounting) | S · std seal · PT | $260.05 | |
| SE125X195 | 195 mm | Basic (no mounting) | - · std seal · PT | $254.00 | |
| SE125X195S | 195 mm | Basic (no mounting) | S · std seal · PT | $260.05 | |
| SE125X200 | 200 mm | Basic (no mounting) | - · std seal · PT | $254.00 | |
| SE125X200S | 200 mm | Basic (no mounting) | S · std seal · PT | $260.05 | |
| SE125BX200S | 200 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $361.02 | |
| SE125BX200CA | 200 mm | CA single clevis | - · SUS304 rod (B) · std seal · PT | $402.69 | |
| SE125X200SCB | 200 mm | CB double clevis | S · std seal · PT | $313.56 | |
| SE125X210 | 210 mm | Basic (no mounting) | - · std seal · PT | $263.31 | |
| SE125X210S | 210 mm | Basic (no mounting) | S · std seal · PT | $269.36 | |
| SE125X220 | 220 mm | Basic (no mounting) | - · std seal · PT | $263.31 | |
| SE125X220S | 220 mm | Basic (no mounting) | S · std seal · PT | $269.36 | |
| SE125X222S | 222 mm | Basic (no mounting) | S · std seal · PT | $269.36 | |
| SE125X225 | 225 mm | Basic (no mounting) | - · std seal · PT | $263.31 | |
| SE125X225S | 225 mm | Basic (no mounting) | S · std seal · PT | $269.36 | |
| SE125X230 | 230 mm | Basic (no mounting) | - · std seal · PT | $272.62 | |
| SE125X230S | 230 mm | Basic (no mounting) | S · std seal · PT | $278.66 | |
| SE125X240 | 240 mm | Basic (no mounting) | - · std seal · PT | $272.62 | |
| SE125X240S | 240 mm | Basic (no mounting) | S · std seal · PT | $278.66 | |
| SE125X250 | 250 mm | Basic (no mounting) | - · std seal · PT | $272.62 | |
| SE125X250S | 250 mm | Basic (no mounting) | S · std seal · PT | $278.66 | |
| SE125X250SN | 250 mm | Basic (no mounting) | S · NBR · PT | $278.66 | |
| SE125BX250S | 250 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $390.59 | |
| SE125X250SFTC | 250 mm | FTC front trunnion | S · std seal · PT | $343.80 | |
| SE125X260 | 260 mm | Basic (no mounting) | - · std seal · PT | $291.02 | |
| SE125X260S | 260 mm | Basic (no mounting) | S · std seal · PT | $297.07 | |
| SE125X270 | 270 mm | Basic (no mounting) | - · std seal · PT | $291.02 | |
| SE125X270S | 270 mm | Basic (no mounting) | S · std seal · PT | $297.07 | |
| SE125X275 | 275 mm | Basic (no mounting) | - · std seal · PT | $291.02 | |
| SE125X275S | 275 mm | Basic (no mounting) | S · std seal · PT | $297.07 | |
| SE125X280 | 280 mm | Basic (no mounting) | - · std seal · PT | $291.02 | |
| SE125X280S | 280 mm | Basic (no mounting) | S · std seal · PT | $297.07 | |
| SE125X290 | 290 mm | Basic (no mounting) | - · std seal · PT | $291.02 | |
| SE125X290S | 290 mm | Basic (no mounting) | S · std seal · PT | $297.07 | |
| SE125X300 | 300 mm | Basic (no mounting) | - · std seal · PT | $291.02 | |
| SE125X300S | 300 mm | Basic (no mounting) | S · std seal · PT | $297.07 | |
| SE125X300SN | 300 mm | Basic (no mounting) | S · NBR · PT | $297.07 | |
| SE125X300CA | 300 mm | CA single clevis | - · std seal · PT | $338.68 | |
| SE125X303SN | 303 mm | Basic (no mounting) | S · NBR · PT | $315.42 | |
| SE125X305SN | 305 mm | Basic (no mounting) | S · NBR · PT | $315.42 | |
| SE125X312S | 312 mm | Basic (no mounting) | S · std seal · PT | $315.42 | |
| SE125X320 | 320 mm | Basic (no mounting) | - · std seal · PT | $309.37 | |
| SE125X320S | 320 mm | Basic (no mounting) | S · std seal · PT | $315.42 | |
| SE125X325 | 325 mm | Basic (no mounting) | - · std seal · PT | $309.37 | |
| SE125X325S | 325 mm | Basic (no mounting) | S · std seal · PT | $315.42 | |
| SE125X330S | 330 mm | Basic (no mounting) | S · std seal · PT | $315.42 | |
| SE125X350 | 350 mm | Basic (no mounting) | - · std seal · PT | $309.37 | |
| SE125X350S | 350 mm | Basic (no mounting) | S · std seal · PT | $315.42 | |
| SE125X350SN | 350 mm | Basic (no mounting) | S · NBR · PT | $315.42 | |
| SE125BX350SN | 350 mm | Basic (no mounting) | S · SUS304 rod (B) · NBR · PT | $449.42 | |
| SE125X375 | 375 mm | Basic (no mounting) | - · std seal · PT | $327.78 | |
| SE125X375S | 375 mm | Basic (no mounting) | S · std seal · PT | $333.82 | |
| SE125X380S | 380 mm | Basic (no mounting) | S · std seal · PT | $333.82 | |
| SE125X385S | 385 mm | Basic (no mounting) | S · std seal · PT | $333.82 | |
| SE125X400 | 400 mm | Basic (no mounting) | - · std seal · PT | $327.78 | |
| SE125X400S | 400 mm | Basic (no mounting) | S · std seal · PT | $333.82 | |
| SE125AX400S | 400 mm | Basic (no mounting) | S · SUS420J2 rod (A) · std seal · PT | $478.73 | |
| SE125X420S | 420 mm | Basic (no mounting) | S · std seal · PT | $352.17 | |
| SE125X425 | 425 mm | Basic (no mounting) | - · std seal · PT | $346.13 | |
| SE125X425S | 425 mm | Basic (no mounting) | S · std seal · PT | $352.17 | |
| SE125X450 | 450 mm | Basic (no mounting) | - · std seal · PT | $346.13 | |
| SE125X450S | 450 mm | Basic (no mounting) | S · std seal · PT | $352.17 | |
| SE125X455SN | 455 mm | Basic (no mounting) | S · NBR · PT | $370.79 | |
| SE125X460S | 460 mm | Basic (no mounting) | S · std seal · PT | $370.79 | |
| SE125X475 | 475 mm | Basic (no mounting) | - · std seal · PT | $364.74 | |
| SE125X475S | 475 mm | Basic (no mounting) | S · std seal · PT | $370.79 | |
| SE125X480S | 480 mm | Basic (no mounting) | S · std seal · PT | $370.79 | |
| SE125X500 | 500 mm | Basic (no mounting) | - · std seal · PT | $364.74 | |
| SE125X500S | 500 mm | Basic (no mounting) | S · std seal · PT | $370.79 | |
| SE125X500FB | 500 mm | FB rear flange | - · std seal · PT | $411.27 | |
| SE125X500SFTC | 500 mm | FTC front trunnion | S · std seal · PT | $435.92 | |
| SE125X550 | 550 mm | Basic (no mounting) | - · std seal · PT | $403.62 | |
| SE125X550S | 550 mm | Basic (no mounting) | S · std seal · PT | $409.66 | |
| SE125X600 | 600 mm | Basic (no mounting) | - · std seal · PT | $403.62 | |
| SE125X600S | 600 mm | Basic (no mounting) | S · std seal · PT | $409.66 | |
| SE125BX600S | 600 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $598.77 | |
| SE125X600SFTC | 600 mm | FTC front trunnion | S · std seal · PT | $474.80 | |
| SE125X630 | 630 mm | Basic (no mounting) | - · std seal · PT | $442.44 | |
| SE125X650 | 650 mm | Basic (no mounting) | - · std seal · PT | $442.44 | |
| SE125X650S | 650 mm | Basic (no mounting) | S · std seal · PT | $448.49 | |
| SE125X700 | 700 mm | Basic (no mounting) | - · std seal · PT | $442.44 | |
| SE125X700S | 700 mm | Basic (no mounting) | S · std seal · PT | $448.49 | |
| SE125X750 | 750 mm | Basic (no mounting) | - · std seal · PT | $481.32 | |
| SE125X750S | 750 mm | Basic (no mounting) | S · std seal · PT | $487.37 | |
| SE125BX750S | 750 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $720.93 | |
| SE125X800 | 800 mm | Basic (no mounting) | - · std seal · PT | $481.32 | |
| SE125X800S | 800 mm | Basic (no mounting) | S · std seal · PT | $487.37 | |
| SE125X850 | 850 mm | Basic (no mounting) | - · std seal · PT | $520.14 | |
| SE125X850S | 850 mm | Basic (no mounting) | S · std seal · PT | $526.19 | |
| SE125X900 | 900 mm | Basic (no mounting) | - · std seal · PT | $520.14 | |
| SE125X900S | 900 mm | Basic (no mounting) | S · std seal · PT | $526.19 | |
| SE125BX900SN | 900 mm | Basic (no mounting) | S · SUS304 rod (B) · NBR · PT | $781.89 | |
| SE125X918S | 918 mm | Basic (no mounting) | S · std seal · PT | $565.27 | |
| SE125X930S | 930 mm | Basic (no mounting) | S · std seal · PT | $565.27 | |
| SE125X950 | 950 mm | Basic (no mounting) | - · std seal · PT | $559.23 | |
| SE125X950S | 950 mm | Basic (no mounting) | S · std seal · PT | $565.27 | |
| SE125X1000 | 1000 mm | Basic (no mounting) | - · std seal · PT | $559.23 | |
| SE125X1000S | 1000 mm | Basic (no mounting) | S · std seal · PT | $565.27 | |
| SE125BX1000 | 1000 mm | Basic (no mounting) | - · SUS304 rod (B) · std seal · PT | $837.00 | |
| SE125BX1000S | 1000 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $843.04 | |
| SE125X1050S | 1050 mm | Basic (no mounting) | S · std seal · PT | $606.22 | |
| SE125BX1050S | 1050 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $931.91 | |
| SE125X1060 | 1060 mm | Basic (no mounting) | - · std seal · PT | $600.17 | |
| SE125X1100 | 1100 mm | Basic (no mounting) | - · std seal · PT | $600.17 | |
| SE125X1100S | 1100 mm | Basic (no mounting) | S · std seal · PT | $606.22 | |
| SE125X1200 | 1200 mm | Basic (no mounting) | - · std seal · PT | $641.11 | |
| SE125X1200S | 1200 mm | Basic (no mounting) | S · std seal · PT | $647.16 | |
| SE125X1300S | 1300 mm | Basic (no mounting) | S · std seal · PT | $688.11 | |
| SE125X1460S | 1460 mm | Basic (no mounting) | S · std seal · PT | $770.00 | |
| SE125X1500 | 1500 mm | Basic (no mounting) | - · std seal · PT | $763.95 | |
| SE125X1500S | 1500 mm | Basic (no mounting) | S · std seal · PT | $770.00 | |
| SE125BX1800S | 1800 mm | Basic (no mounting) | S · SUS304 rod (B) · std seal · PT | $1,553.99 |
Need a combination that is not listed? Request a quote.
Over 6.1 kN at 0.5 MPa for presses, lifting tables and dampers.
Opens chutes, gates and dampers on bulk-handling equipment.
Clevis and trunnion versions swing large doors and platforms.
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is listed with FB rear flange, CA single clevis, CB double clevis, FTC front trunnion. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: the rod is carbon steel unless the version names a stainless rod (A / B); S adds a magnet for position sensors; the standard seal suits general automation; H (FKM) is for higher temperatures or oil-contaminated air; N specifies NBR.
No. Every SE125 gives about 6136 N push and 5734 N pull at 0.5 MPa, whatever the stroke.
1/2" ports, PT thread as standard.
Basic plus FB rear flange, CA single clevis, CB double clevis, FTC front trunnion. Use foot or flange for straight-line loads, clevis or trunnion when the cylinder must pivot.
Yes. The standard rod is medium carbon steel. On this page A codes use a SUS420J2 stainless steel rod and B codes use a SUS304 stainless steel rod; pick them under the version option.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SE125. Orders are processed and handed to the carrier within 3-5 business days.
Every order code on this page is the AirTAC factory part number. Specifications follow the official AirTAC catalog. About us
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-16.
Send the order code, quantity and destination. We confirm price, availability and lead time, usually within 7-8 hours.