AirTAC SUD100 Double-Rod Standard Cylinder, 100 mm Bore
Every AirTAC SUD100 configuration on one page: 34 stock order codes with strokes from 10 to 650 mm, magnet versions, from $127.45. Pick a stroke and version to see the exact order code and price. Discontinued series: orders ship as the SAUD with the same code.
Basic (no mounting)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC SUD100
Discontinued: AirTAC has replaced the SUD series with the SAUD series. Every SUD code on this page is supplied as the current SAUD with the same code after the prefix, for example SUD100X10 ships as SAUD100X10. The specifications on this page are those of the SAUD you receive.
The AirTAC SUD100 is a double-rod, double-acting standard air cylinder with a 100 mm bore and a 25 mm piston rod. The rod runs through both end covers, so push and pull are equal: 3682 N at 0.5 MPa and 5154 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SUD100 versions share 1/2" air ports, an M20×1.5 rod thread and 29 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 34 stock order codes with strokes from 10 to 650 mm; catalog standard strokes run up to 1000 mm.
SUD100 Technical Specifications
| Bore size | Ø100 mm |
|---|---|
| Stock strokes | 10 – 650 mm |
| Catalog standard stroke | up to 1000 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 1/2" (PT standard) |
| Piston rod / rod thread | Ø25 mm / M20×1.5 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
Source: official AirTAC SAU series (SAUD double-rod version) datasheet. The SUD series is discontinued; these are the SAUD specifications.
Theoretical output force (Ø100 mm)
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 3682 N | 3682 N |
| 0.7 MPa | 5154 N | 5154 N |
Both directions act on the bore area minus the Ø25 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
How the SUD100 Order Code Is Built
| SUD100 | Series and bore (100 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| - | Mounting: basic only |
| H / N | Seal: H = FKM, N = NBR (blank = standard seal) |
| G | Port thread: G = G (BSPP), blank = PT |
All AirTAC SUD100 Order Codes (34)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SUD100X10 | 10 mm | Basic (no mounting) | - · std seal · PT | $127.45 | |
| SUD100X15 | 15 mm | Basic (no mounting) | - · std seal · PT | $127.45 | |
| SUD100X25 | 25 mm | Basic (no mounting) | - · std seal · PT | $127.45 | |
| SUD100X25S | 25 mm | Basic (no mounting) | S · std seal · PT | $133.03 | |
| SUD100X40S | 40 mm | Basic (no mounting) | S · std seal · PT | $136.08 | |
| SUD100X50 | 50 mm | Basic (no mounting) | - · std seal · PT | $130.50 | |
| SUD100X50S | 50 mm | Basic (no mounting) | S · std seal · PT | $136.08 | |
| SUD100X75 | 75 mm | Basic (no mounting) | - · std seal · PT | $137.01 | |
| SUD100X75S | 75 mm | Basic (no mounting) | S · std seal · PT | $142.59 | |
| SUD100X80 | 80 mm | Basic (no mounting) | - · std seal · PT | $143.27 | |
| SUD100X80S | 80 mm | Basic (no mounting) | S · std seal · PT | $148.85 | |
| SUD100X100 | 100 mm | Basic (no mounting) | - · std seal · PT | $143.27 | |
| SUD100X100S | 100 mm | Basic (no mounting) | S · std seal · PT | $148.85 | |
| SUD100X125 | 125 mm | Basic (no mounting) | - · std seal · PT | $149.78 | |
| SUD100X125S | 125 mm | Basic (no mounting) | S · std seal · PT | $155.36 | |
| SUD100X150 | 150 mm | Basic (no mounting) | - · std seal · PT | $156.30 | |
| SUD100X150S | 150 mm | Basic (no mounting) | S · std seal · PT | $161.88 | |
| SUD100X160 | 160 mm | Basic (no mounting) | - · std seal · PT | $162.60 | |
| SUD100X160S | 160 mm | Basic (no mounting) | S · std seal · PT | $168.19 | |
| SUD100X175 | 175 mm | Basic (no mounting) | - · std seal · PT | $162.60 | |
| SUD100X175S | 175 mm | Basic (no mounting) | S · std seal · PT | $168.19 | |
| SUD100X200 | 200 mm | Basic (no mounting) | - · std seal · PT | $168.86 | |
| SUD100X200S | 200 mm | Basic (no mounting) | S · std seal · PT | $174.44 | |
| SUD100X225S | 225 mm | Basic (no mounting) | S · std seal · PT | $180.95 | |
| SUD100X250 | 250 mm | Basic (no mounting) | - · std seal · PT | $181.68 | |
| SUD100X250S | 250 mm | Basic (no mounting) | S · std seal · PT | $187.26 | |
| SUD100X300 | 300 mm | Basic (no mounting) | - · std seal · PT | $194.45 | |
| SUD100X300S | 300 mm | Basic (no mounting) | S · std seal · PT | $200.03 | |
| SUD100X330 | 330 mm | Basic (no mounting) | - · std seal · PT | $207.27 | |
| SUD100X350S | 350 mm | Basic (no mounting) | S · std seal · PT | $212.85 | |
| SUD100X400S | 400 mm | Basic (no mounting) | S · std seal · PT | $225.62 | |
| SUD100X450 | 450 mm | Basic (no mounting) | - · std seal · PT | $232.86 | |
| SUD100X620S | 620 mm | Basic (no mounting) | S · std seal · PT | $306.37 | |
| SUD100X650S | 650 mm | Basic (no mounting) | S · std seal · PT | $306.37 |
Need a combination that is not listed? Request a quote.
Where the SUD100 Is Used
Heavy pushing and lifting
About 3682 N at 0.5 MPa moves heavy slides, lifts gates and ejects parts.
Clamping and pressing
Rigid mountings for press-fit, riveting and heavy clamping.
Pivoting mechanisms
Clevis and trunnion versions drive levers, dampers and tilting tables.
Choosing the Right SUD100 Configuration
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Every code on this page is the basic version without a mounting code: the cylinder is fixed through its own mounting holes.
Finally pick the version: S adds a magnet for position sensors; the standard seal suits general automation.
AirTAC SUD100 FAQ
Discontinued: AirTAC has replaced the SUD series with the SAUD series. Every SUD code on this page is supplied as the current SAUD with the same code after the prefix, for example SUD100X10 ships as SAUD100X10. The specifications on this page are those of the SAUD you receive.
No. Every SUD100 gives about 3682 N in both directions at 0.5 MPa, whatever the stroke.
1/2" ports, PT thread as standard.
Every code on this page is the basic version without a mounting code; the cylinder is fixed through its own mounting holes.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SUD100. Orders are processed and handed to the carrier within 3-5 business days.
Buying the SUD100 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-11.
Request a Quote for the SUD100
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.