AirTAC LGC1B Crossed Roller Guide, Φ1.5 mm Rollers, Four-Rail Set
Every stocked AirTAC LGC1B set on one page: 15 order codes with rails from 20 to 80 mm, from $97.67. Pick the rail length and roller count to see the exact order code and price.
High (H)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC LGC1B
The AirTAC LGC1B is an LGC crossed roller guide with Φ1.5 mm rollers, supplied as a complete four-rail set (B): rails, roller cages and end screws. Each roller is rated C 125 N dynamic and C0 120 N static (39 N allowable load), at 2.5 mm roller pitch.
Crossed roller guides are non-recirculating: precision rollers set alternately at right angles run between V-grooved rails, so friction is very low while the rigid rails carry high loads. The rails are stainless steel and the rollers are JIS B 1506 G2 grade. Main and secondary rails are the same length. This page lists 20 – 80 mm rails with 6 – 19 rollers per cage.
LGC1B Technical Specifications
| Roller diameter | Φ1.5 mm |
|---|---|
| Set type | Four-rail (B) |
| Roller pitch | 2.5 mm |
| Stocked rail lengths | 20 – 80 mm |
| Rollers per cage | R6 – R19 |
| Material | Stainless steel rails |
| Dynamic load rating C | 125 N per roller |
|---|---|
| Static load rating C0 | 120 N per roller |
| Allowable load | 39 N per roller |
| Height H tolerance H / P | ±0.02 / ±0.01 mm |
| Width W tolerance H / P | ±0.02 / ±0.01 mm |
| Accuracy | high (H) |
Source: AirTAC linear guide catalog (PDF02-P0097 to P0101), LGC ordering codes and size tables.
How the LGC1B Order Code Is Built
| LGC | LGC crossed roller guide |
|---|---|
| 1 | Roller Φ1.5 mm |
| A / B | Three-rail / four-rail set |
| 20 | Rail length in mm |
| R6 | Rollers per cage |
| -H / P | High / precision accuracy |
All AirTAC LGC1B Order Codes (15)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Rail length | Rollers per cage | Accuracy | Price | Select |
|---|---|---|---|---|---|
| LGC1B20R6-H | 20 mm rails | R6 (6 rollers) | High (H) | $97.67 | |
| LGC1B20R7-H | 20 mm rails | R7 (7 rollers) | High (H) | $100.00 | |
| LGC1B30R8-H | 30 mm rails | R8 (8 rollers) | High (H) | $114.68 | |
| LGC1B30R9-H | 30 mm rails | R9 (9 rollers) | High (H) | $117.01 | |
| LGC1B30R10-H | 30 mm rails | R10 (10 rollers) | High (H) | $119.33 | |
| LGC1B30R11-H | 30 mm rails | R11 (11 rollers) | High (H) | $121.66 | |
| LGC1B40R11-H | 40 mm rails | R11 (11 rollers) | High (H) | $133.75 | |
| LGC1B40R13-H | 40 mm rails | R13 (13 rollers) | High (H) | $138.61 | |
| LGC1B50R13-H | 50 mm rails | R13 (13 rollers) | High (H) | $150.71 | |
| LGC1B50R16-H | 50 mm rails | R16 (16 rollers) | High (H) | $157.95 | |
| LGC1B50R19-H | 50 mm rails | R19 (19 rollers) | High (H) | $165.13 | |
| LGC1B60R16-H | 60 mm rails | R16 (16 rollers) | High (H) | $170.05 | |
| LGC1B60R19-H | 60 mm rails | R19 (19 rollers) | High (H) | $177.03 | |
| LGC1B70R19-H | 70 mm rails | R19 (19 rollers) | High (H) | $193.31 | |
| LGC1B80R19-H | 80 mm rails | R19 (19 rollers) | High (H) | $209.80 |
Need a combination that is not listed? Request a quote.
Where the LGC1B Is Used
Measuring and optical equipment
Optical test instruments, optical benches and X-ray equipment slides.
PCB and electronics machines
Slides of printed circuit board drilling machines and inspection stages.
Precision stages
Short-stroke XY and Z stages that need high rigidity and accuracy.
Choosing the Right LGC1B Configuration
Start with the rail length: it sets the size of the slide.
Then the number of rollers per cage. More rollers carry more load but leave less stroke on a given rail length; the catalog's maximum-stroke table lists the stroke of each combination.
Accuracy is H (high) or P (precision). For a size or combination not listed, request a quote.
AirTAC LGC1B FAQ
A is a three-rail set and B a four-rail set; both use the same rollers and rail lengths. LGC6 is made as a four-rail set only.
Yes. Order LGC1R plus the roller count, for example LGC1R6.
Usually yes. Request a quote with the full order code and we will confirm price and lead time.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the LGC1B from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the LGC1B
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.