AirTAC Pneumatics
AirTAC TMICM Series Mini Guided Cylinders - Bronze Bushing
AirTAC TMICM is a compact guided cylinder pairing a mini cylinder with a twin guide rod frame and bronze bushing, built to carry side load and torque in 16-25 mm bores.
inventory_247 models availableSeries Overview
The AirTAC TMICM series is a guided cylinder built as a guide frame combined with a mini cylinder. Twin guide rods carry the side load and torque so the small piston rod does not have to, giving high resistance to twisting and lateral load. Stocked bores are 16, 20 and 25 mm, with strokes from 25 mm to 200 mm on bore 16 and up to 250 mm on bores 20 and 25. Every model is double acting with an adjustable cushion.
Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s and temperature -20 to +70 C on air filtered to 40 micron or finer. Ports are M5x0.8 on bore 16 and PT1/8 on bores 20 and 25; all 47 live SKUs are PT or M5 form, and G-thread versions are available to order. Mounting suits multiple orientations. The M in the code means a bronze sliding bushing: the catalogue gives the M type greater torsional rigidity than the L linear-bearing type and recommends it for radial loads such as braking and stopping. AirTAC claims no ISO standard for the TMI/TMIC family, so it is not an ISO 6432 or ISO 15552 drop-in.
A magnet option (code S) is fitted on 24 of the 47 stocked SKUs for switch position detection; confirm the matching switch series from the datasheet. Prices run $85.83 to $155.62, roughly 15-20% below the TMICL linear-bearing equivalent. A standalone guide frame with no cylinder is ordered under the F-TMIC accessory code.
Browse Models
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X80S
SKU: TMICM25X80S
$135.15$142.65
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X75S
SKU: TMICM25X75S
$131.64$139.14
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X75
SKU: TMICM25X75
$129.77$137.27
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X50S
SKU: TMICM25X50S
$128.17$135.67
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X50
SKU: TMICM25X50
$126.31$133.81
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X25S
SKU: TMICM25X25S
$124.92$132.42
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X250S
SKU: TMICM25X250S
$155.62$163.12
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X250
SKU: TMICM25X250
$153.76$161.26
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X25
SKU: TMICM25X25
$123.05$130.55
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X200S
SKU: TMICM25X200S
$148.64$156.14
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X200
SKU: TMICM25X200
$146.78$154.28
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X150S
SKU: TMICM25X150S
$141.87$149.37
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X150
SKU: TMICM25X150
$140.01$147.51
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X125S
SKU: TMICM25X125S
$138.41$145.91
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X125
SKU: TMICM25X125
$136.55$144.05
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X100S
SKU: TMICM25X100S
$135.15$142.65
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM25X100
SKU: TMICM25X100
$133.29$140.79
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X75S
SKU: TMICM20X75S
$115.35$122.85
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X75
SKU: TMICM20X75
$113.49$120.99
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X50S
SKU: TMICM20X50S
$112.35$119.85
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X50
SKU: TMICM20X50
$110.49$117.99
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X25S
SKU: TMICM20X25S
$109.56$117.06
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X250S
SKU: TMICM20X250S
$136.29$143.79
schedule Confirm lead time
Airtac TMIC Guided Cylinder with Guide Unit TMICM20X250
SKU: TMICM20X250
$134.43$141.93
schedule Confirm lead time
Typical Applications
Fixture clamping with side load
Clamping stations on small assembly fixtures often push a part against an edge or stop, putting radial load on the actuator. The TMICM twin guide rods and bronze bushing take that side load and torque instead of the piston rod, and the adjustable cushion softens contact.
Product stopping on conveyor lines
Braking and stopping actions are the catalogue's own example for the M sliding-bearing type. A 20 or 25 mm bore TMICM can stop cartons on a light conveyor without the rod twisting under the side load, with strokes to 250 mm covering most lane widths.
Guided pushers in packaging machinery
Label-head pushers and case-positioning slides need straight, non-twisting strokes in tight space. The 16-25 mm bores and 25-250 mm stocked strokes fit compact packing machines, and the adjustable cushion eases end-of-stroke impact at speeds up to 500 mm/s.
Slide gates on small automation modules
Slide gates and index stops on rotary tables take lateral knocks during indexing. The frame-and-mini-cylinder design resists twisting, and the -S magnet option lets a PLC confirm gate position at each cycle.
How to Choose the Right Model
Start with the load direction. The bronze bushing (M) suits duty where the cylinder takes radial load - braking, stopping, clamping against a fixture - and offers greater torsional rigidity. If your motion is low-friction lifting or high-precision pushing, the TMICL linear-bearing version is the better match at about 15-20% higher price. Pick bore 16 for light guides and small clamps, bore 20 or 25 when torque or side load rises. Standard strokes step 25, 50, 75, 100, 125, 150 and 200 mm (250 mm on bores 20 and 25); the stroke is tied to the bore in the ordering rules, so a non-table stroke needs a custom enquiry. Add S to the code for a magnet.
Step outside the series when the frame runs out. Above 25 mm bore or 250 mm stroke, move to AirTAC TSAIM - the same guide-frame idea on a standard cylinder with bores 32-100 mm and strokes to 500 mm. If you prefer guide rods integrated in one body rather than a frame bolted to a cylinder, look at TCM or TCL, which also reach 6 and 10 mm bore. If your load has no side force at all, a plain MI or MIC mini cylinder removes the guide frame cost. Before ordering, confirm five points: bore, stroke (and the bore-stroke dependency), port thread (M5x0.8 or PT1/8, or G to order), mounting orientation, and whether you need the magnet -S option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and available mounting space
- ✓ Port / thread type (PT / NPT / G)
- ✓ Sensor / magnet option (-S)?
- ✓ Side load — consider a guided model
Frequently Asked Questions
Stocked bores are 16, 20 and 25 mm. Bore 16 takes strokes of 25 to 200 mm; bores 20 and 25 take 25 to 250 mm, in standard steps of 25, 50, 75, 100, 125, 150 and 200 mm (250 mm on the two larger bores). Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s. No push-force table is published for this series, so confirm output force from the datasheet for your bore and pressure.
Both share the same guide frame and mini cylinder. M means a bronze sliding bushing, recommended for radial loads such as braking and stopping and stated to have greater torsional rigidity. L means a linear bearing, recommended for lifting and pushing motion, high precision, high load capacity and low-friction duty. TMICM runs $85.83 to $155.62, roughly 15-20% less than TMICL, so the bronze bushing saves money whenever the extra precision is not needed.
The 12 mm bore appears in the wider catalogue but is not stocked under the TMIC code and does not appear in our live SKUs; bores 16, 20 and 25 are stocked across 47 SKUs. All stocked models are PT or M5 thread form. G-thread versions are available to order - ask us and we will quote lead time. Non-standard strokes are also a custom enquiry rather than a catalogue option.
AirTAC claims no standard for the TMI/TMIC family, so it is not an ISO 6432 or ISO 15552 interchangeable cylinder and should not be treated as a drop-in for one. Models carrying the S code include a magnet for switch position detection; the compatible switch series must be confirmed from the datasheet. AirtacDistr supplies genuine AirTAC parts only - stocked models ship quickly and non-standard variants are quoted by RFQ.
Authorized Export Seller
Genuine AirTAC parts produced by the AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote
Send us the model number, quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.