AirTAC 4V130E-06 5/3-way Solenoid Valve, Exhaust Center, 1/8" Port
Every stock AirTAC 4V130E-06 configuration on one page: 10 order codes covering 5 coil voltages, terminal box or grommet lead, and PT, G or NPT threads, from $51.14. Pick voltage, entry and thread to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 4V130E-06
The AirTAC 4V130E-06 is a 5/3-way pilot-operated spool valve on the 4V100 body with 1/8" working ports. It is a 5/3 exhaust-center valve: with both coils off, both cylinder ports exhaust, so the cylinder can be moved freely by hand.
The 4V130E-06 has an effective area of 8.6 mm² (Cv 0.51), a maximum frequency of 3 cycles per second and weighs about 200 g. It works from 0.15 to 0.8 MPa on air filtered to 40 µm, needs no lubrication, responds in 0.05 s or less, and its coil is rated IP65 with class B insulation. A manual override is fitted, and valves can be mounted on a manifold base.
4V130E-06 Technical Specifications
| Model | 4V130E-06 |
|---|---|
| Function | 5/3-way, exhaust center |
| Working port | 1/8" |
| Exhaust port | 1/8" |
| Effective area (Cv) | 8.6 mm² (Cv 0.51) |
| Max frequency | 3 cycles/s |
| Weight | 200 g |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Temperature | -20 to +70 °C |
| Response time | 0.05 s or less |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 / class B |
Source: official AirTAC 4V100–4V400 datasheet. Lubrication is not required; a manual override is fitted.
How the 4V130E-06 Order Code Is Built
| 4V | Series |
|---|---|
| 1 | Body size: 1 = 4V100 |
| 30E | Function: 10 single 5/2, 20 double 5/2, 30C/30E/30P 5/3 closed/exhaust/pressure center |
| 06 | Port: 06 = 1/8" |
| A / B / C / E / F | Voltage: A AC220V, B DC24V, C AC110V, E AC24V, F DC12V |
| I | Grommet lead wire (blank = terminal box) |
| G / T | Thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC 4V130E-06 Order Codes (10)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Voltage | Entry | Thread | Price | Select |
|---|---|---|---|---|---|
| 4V130E06B | DC24V (B) | Terminal box | PT | $51.14 | |
| 4V130E06BI | DC24V (B) | Grommet lead wire (I) | PT | $51.14 | |
| 4V130E-06-A | AC220V (A) | Terminal box | PT | $51.40 | |
| 4V130E06AI | AC220V (A) | Grommet lead wire (I) | PT | $51.14 | |
| 4V130E06C | AC110V (C) | Terminal box | PT | $51.14 | |
| 4V130E06CI | AC110V (C) | Grommet lead wire (I) | PT | $51.14 | |
| 4V130E06E | AC24V (E) | Terminal box | PT | $51.14 | |
| 4V130E06F | DC12V (F) | Terminal box | PT | $51.14 | |
| 4V130E06FT | DC12V (F) | Terminal box | NPT (T) | $68.66 | |
| 4V130E06FI | DC12V (F) | Grommet lead wire (I) | PT | $51.14 |
Need a combination that is not listed? Request a quote.
Where the 4V130E-06 Is Used
Cylinder control
Drives double-acting cylinders: the 5/3-way layout switches supply between the two cylinder ports.
Free cylinder at center
Exhaust center vents the cylinder so it can be moved by hand for setup.
Manifold installations
4V100 valves share a manifold base footprint, so several valves can run from one supply.
Choosing the Right 4V130E-06 Configuration
Choose the coil voltage to match your control circuit: DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F).
Then the electrical entry. The standard terminal box takes your own cable through a gland. The I version has a grommet with a 0.5 m lead wire already attached.
Finally the port thread: PT is standard, and NPT for North American fittings is marked T.
AirTAC 4V130E-06 FAQ
It is a 5/3 exhaust-center valve: with both coils off, both cylinder ports exhaust, so the cylinder can be moved freely by hand.
Effective area 8.6 mm², Cv 0.51. Maximum frequency is 3 cycles per second.
DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). The letter after the port size gives the voltage.
0.15 to 0.8 MPa operating pressure (proof pressure 1.2 MPa), with air filtered to 40 µm. No lubrication is required.
Yes, the T version has NPT ports.
No. You can order a single 4V130E-06. Orders are processed and handed to the carrier within 3-5 business days.
Buying the 4V130E-06 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-09-27.
Request a Quote for the 4V130E-06
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.