AirTAC 2V025-08 2/2-Way Fluid Control Solenoid Valve, Normally Closed, 1/4" Port
Every stocked AirTAC 2V025-08 configuration on one page: 10 order codes covering 5 coil voltages, from $27.88. Pick the voltage, electrical entry and thread to see the exact order code and price.
PT
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 2V025-08
The AirTAC 2V025-08 is a normally closed 2/2-way solenoid valve for air, water and oil, with PT1/4 ports and a Ø2.5 mm orifice (Cv 0.25). It is direct-acting, so it opens from zero pressure and switches quickly; the body is nickel-plated copper with FKM (VITON) seals, which suit a wide range of media.
It works at 0 – 1.0 MPa with media up to 20 cSt viscosity, proof pressure 1.5 MPa, and responds in 0.05 s or less. The coil draws 7.0 VA (AC) or 7.0 W (DC), class B insulation.
2V025-08 Technical Specifications
| Model | 2V025-08 |
|---|---|
| Function | 2/2-way, normally closed |
| Operation | Direct-acting |
| Port | PT1/4 |
| Orifice | Ø2.5 mm |
| Cv | 0.25 |
| Body / seal | Copper, nickel-plated / FKM (VITON) |
| Media | Air, water, oil |
|---|---|
| Viscosity | 20 cSt or less |
| Operating pressure | 0 – 1.0 MPa (0 – 145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Coil power | AC 7.0 VA (50/60 Hz) · DC 7.0 W |
| Voltage tolerance | AC ±15%, DC ±10% |
| Insulation | Class B |
| Response time | 0.05 s or less |
Source: AirTAC Products Catalog 2026A (PDF01-P0195), 2V series specifications and ordering code.
How the 2V025-08 Order Code Is Built
| 2V | 2/2-way fluid control valve |
|---|---|
| 025 | Orifice Ø2.5 mm |
| 08 | Port 1/4" |
| A / B / C / E / F | Voltage: A AC220V, B DC24V, C AC110V, E AC24V, F DC12V |
| I | Lead wire 0.5 m (blank = DIN connector) |
| G / T | Thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC 2V025-08 Order Codes (10)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Voltage | Entry | Thread | Price | Select |
|---|---|---|---|---|---|
| 2V02508B | DC24V (B) | DIN connector | PT | $27.88 | |
| 2V02508BI | DC24V (B) | Lead wire 0.5 m (I) | PT | $27.88 | |
| 2V025-08-A | AC220V (A) | DIN connector | PT | $28.14 | |
| 2V02508AI | AC220V (A) | Lead wire 0.5 m (I) | PT | $27.88 | |
| 2V02508C | AC110V (C) | DIN connector | PT | $27.88 | |
| 2V02508CI | AC110V (C) | Lead wire 0.5 m (I) | PT | $27.88 | |
| 2V02508E | AC24V (E) | DIN connector | PT | $27.88 | |
| 2V02508EI | AC24V (E) | Lead wire 0.5 m (I) | PT | $27.88 | |
| 2V02508F | DC12V (F) | DIN connector | PT | $27.88 | |
| 2V02508FI | DC12V (F) | Lead wire 0.5 m (I) | PT | $27.88 |
Need a combination that is not listed? Request a quote.
Where the 2V025-08 Is Used
Water lines
Switches water supplies for cooling, washing and rinsing.
Air and gas shut-off
Opens and closes compressed air or inert gas lines.
Light oil
Handles oils up to 20 cSt, such as ISO VG32 hydraulic oil.
Choosing the Right 2V025-08 Configuration
Choose the coil voltage to match your control circuit: DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). Supply tolerance is AC ±15% and DC ±10%.
For the electrical entry, the standard DIN connector takes your own cable; the I version has a 0.5 m lead wire already attached.
The port thread: PT is standard.
The 2V is normally closed: the valve opens only while the coil is energised.
AirTAC 2V025-08 FAQ
Normally closed: the valve opens only while the coil is energised.
Air, water and oil up to 20 cSt. Flammable media such as ethylene glycol need an explosion-proof coil, and acetone is not suitable for NBR seals; for media not in the catalog fluid table, check with us first.
0 – 1.0 MPa (0 – 145 psi), proof pressure 1.5 MPa.
DC24V (B), AC220V (A), AC110V (C), AC24V (E), DC12V (F). The letter after the port size gives the voltage.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the 2V025-08 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the 2V025-08
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.