AirTAC 4M210-06 5/2-Way NAMUR Solenoid Valve, Single Solenoid, 1/8" Port
Every stocked AirTAC 4M210-06 configuration on one page: 4 order codes covering 2 coil voltages, from $25.55. Pick the voltage, electrical entry and thread to see the exact order code and price.
PT
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC 4M210-06
The AirTAC 4M210-06 is a 5/2-way, internally piloted spool valve with a NAMUR side-face interface, so it bolts straight onto an actuator without piping between them. It is a single-solenoid valve: energising the coil shifts the spool and a spring returns it when power is removed. On this model inlet and exhaust are both PT1/8.
The spool seals well and responds quickly; a specially finished bore keeps friction and starting pressure low for a long life. It works from 0.15 to 0.8 MPa on air filtered to 40 µm, needs no lubrication, switches up to 5 times per second and weighs about 220 g. The coil is rated IP65 with class B insulation, and a manual override helps setup.
4M210-06 Technical Specifications
| Model | 4M210-06 |
|---|---|
| Function | 5/2-way, single solenoid, spring return |
| Mounting | NAMUR side-face |
| Inlet / exhaust | PT1/8 / PT1/8 |
| Effective area | 17.0 mm² (Cv 1.0) is the catalog value for the 4M210-08/4M220-08 |
| Max frequency | 5 cycles/s |
| Weight | 220 g |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Pilot | Internal |
| Operating pressure | 0.15 – 0.8 MPa (21 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Coil power | AC220V / AC110V 4.5 VA · AC24V 5.0 VA · DC24V 3.0 W · DC12V 2.5 W |
| Voltage tolerance | AC ±15%, DC ±10% |
| Protection / insulation | IP65 (DIN40050) / class B |
| Response time | 0.05 s or less |
| Body | Aluminum alloy |
Source: AirTAC Products Catalog 2026A (PDF01-P0092), 4M series specifications and ordering code. Lubrication is not required.
How the 4M210-06 Order Code Is Built
| 4M | 5/2-way NAMUR solenoid valve |
|---|---|
| 2 | Body size: 200 series |
| 10 | 10 single solenoid, 20 double solenoid |
| 06 | Port: 1/8" |
| A / B / C / E / F | Voltage: A AC220V, B DC24V, C AC110V, E AC24V, F DC12V |
| I | Lead wire 0.5 m (blank = DIN connector) |
| G / T | Thread: G = G (BSPP), T = NPT, blank = PT |
All AirTAC 4M210-06 Order Codes (4)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Voltage | Entry | Thread | Price | Select |
|---|---|---|---|---|---|
| 4M21006B | DC24V (B) | DIN connector | PT | $25.55 | |
| 4M21006BI | DC24V (B) | Lead wire 0.5 m (I) | PT | $25.55 | |
| 4M210-06-A | AC220V (A) | DIN connector | PT | $25.55 | |
| 4M21006AI | AC220V (A) | Lead wire 0.5 m (I) | PT | $25.55 |
Need a combination that is not listed? Request a quote.
Where the 4M210-06 Is Used
Rotary valve actuators
The NAMUR face mounts directly on pneumatic rotary actuators for ball and butterfly valves.
Fail-safe return
Spring return sends the actuator back whenever the signal drops.
Cylinder control
As a 5/2-way valve it also switches supply between the two ports of a double-acting cylinder.
Choosing the Right 4M210-06 Configuration
Choose the coil voltage to match your control circuit: DC24V (B), AC220V (A). Supply tolerance is AC ±15% and DC ±10%.
For the electrical entry, the standard DIN connector takes your own cable; the I version has a 0.5 m lead wire already attached.
The port thread: PT is standard.
The 4M210 also comes with 1/4" ports; it has its own page.
AirTAC 4M210-06 FAQ
It is a single-solenoid valve: energising the coil shifts the spool and a spring returns it when power is removed.
A standard side-face interface: the valve bolts directly onto the actuator, with no tubing between valve and actuator.
DC24V (B), AC220V (A). The letter after the port size gives the voltage.
0.15 to 0.8 MPa (21-114 psi), proof pressure 1.2 MPa, -20 to +70 °C, on air filtered to 40 µm. No lubrication is needed; if you do lubricate, keep it up and use ISO VG32 oil.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the 4M210-06 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the 4M210-06
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.