Every AirTAC SCD63 configuration on one page: 89 stock order codes with strokes from 15 to 825 mm, 3 mounting styles and magnet and seal versions, from $70.01. Pick a stroke, mounting and version to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
The AirTAC SCD63 is a double-rod, double-acting tie-rod cylinder with a 63 mm bore and a 20 mm piston rod. The rod runs through both end covers, so push and pull are equal: 1402 N at 0.5 MPa and 1962 N at 0.7 MPa. Force depends on bore and pressure only, so every stroke on this page gives the same output.
All SCD63 versions share 1/4" air ports, an M16×1.5 rod thread and 28 mm adjustable air cushions. The cylinder runs on filtered air between 0.15 and 1.0 MPa (proof 1.5 MPa), from -20 to +70 °C, at 30 to 800 mm/s. This page lists 89 stock order codes with strokes from 15 to 825 mm; catalog standard strokes run up to 1000 mm.
| Bore size | Ø63 mm |
|---|---|
| Stock strokes | 15 – 825 mm |
| Catalog standard stroke | up to 1000 mm (longer on request) |
| Acting type | Double acting, double rod |
| Port size | 1/4" (PT standard) |
| Piston rod / rod thread | Ø20 mm / M16×1.5 |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 28 mm |
Source: AirTAC Products Catalog 2026A, SC series (SCD double-rod version, same body as SC).
| Pressure | Push | Pull |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
Both directions act on the bore area minus the Ø20 mm rod area, because the rod passes through both end covers. Usable force is lower because of friction and back-pressure.
| SCD63 | Series and bore (63 mm) |
|---|---|
| X100 | Stroke in mm |
| S | Built-in magnet for position sensors (blank = none) |
| LB / FA / TC | Mounting: LB foot, FA front flange, TC center trunnion |
| H / N | Seal: H = FKM, N = NBR (blank = standard seal) |
| G | Port thread: G = G (BSPP), blank = PT |
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke (mm) | Mounting | Magnet · Seal · Thread | Price | Select |
|---|---|---|---|---|---|
| SCD63X15 | 15 mm | Basic (no mounting) | - · std seal · PT | $70.01 | |
| SCD63X25 | 25 mm | Basic (no mounting) | - · std seal · PT | $70.01 | |
| SCD63X25S | 25 mm | Basic (no mounting) | S · std seal · PT | $74.66 | |
| SCD63X30 | 30 mm | Basic (no mounting) | - · std seal · PT | $71.61 | |
| SCD63X30S | 30 mm | Basic (no mounting) | S · std seal · PT | $76.27 | |
| SCD63X35 | 35 mm | Basic (no mounting) | - · std seal · PT | $71.61 | |
| SCD63X40 | 40 mm | Basic (no mounting) | - · std seal · PT | $71.61 | |
| SCD63X40S | 40 mm | Basic (no mounting) | S · std seal · PT | $76.27 | |
| SCD63X40TC | 40 mm | TC center trunnion | - · std seal · PT | $92.09 | |
| SCD63X45 | 45 mm | Basic (no mounting) | - · std seal · PT | $71.61 | |
| SCD63X45S | 45 mm | Basic (no mounting) | S · std seal · PT | $76.27 | |
| SCD63X50 | 50 mm | Basic (no mounting) | - · std seal · PT | $71.61 | |
| SCD63X50H | 50 mm | Basic (no mounting) | - · FKM · PT | $85.11 | |
| SCD63X50S | 50 mm | Basic (no mounting) | S · std seal · PT | $76.27 | |
| SCD63X50TC | 50 mm | TC center trunnion | - · std seal · PT | $92.09 | |
| SCD63X55 | 55 mm | Basic (no mounting) | - · std seal · PT | $73.94 | |
| SCD63X56S | 56 mm | Basic (no mounting) | S · std seal · PT | $78.59 | |
| SCD63X60 | 60 mm | Basic (no mounting) | - · std seal · PT | $73.94 | |
| SCD63X60S | 60 mm | Basic (no mounting) | S · std seal · PT | $78.59 | |
| SCD63X65S | 65 mm | Basic (no mounting) | S · std seal · PT | $78.59 | |
| SCD63X65FA | 65 mm | FA front flange | - · std seal · PT | $84.18 | |
| SCD63X65STC | 65 mm | TC center trunnion | S · std seal · PT | $99.07 | |
| SCD63X68S | 68 mm | Basic (no mounting) | S · std seal · PT | $78.59 | |
| SCD63X70 | 70 mm | Basic (no mounting) | - · std seal · PT | $73.94 | |
| SCD63X70S | 70 mm | Basic (no mounting) | S · std seal · PT | $78.59 | |
| SCD63X70STC | 70 mm | TC center trunnion | S · std seal · PT | $99.07 | |
| SCD63X75 | 75 mm | Basic (no mounting) | - · std seal · PT | $73.94 | |
| SCD63X75S | 75 mm | Basic (no mounting) | S · std seal · PT | $78.59 | |
| SCD63X75SLB | 75 mm | LB foot | S · std seal · PT | $84.18 | |
| SCD63X75TC | 75 mm | TC center trunnion | - · std seal · PT | $94.41 | |
| SCD63X80 | 80 mm | Basic (no mounting) | - · std seal · PT | $76.53 | |
| SCD63X80S | 80 mm | Basic (no mounting) | S · std seal · PT | $81.18 | |
| SCD63X80STC | 80 mm | TC center trunnion | S · std seal · PT | $101.65 | |
| SCD63X96 | 96 mm | Basic (no mounting) | - · std seal · PT | $76.53 | |
| SCD63X100 | 100 mm | Basic (no mounting) | - · std seal · PT | $76.53 | |
| SCD63X100H | 100 mm | Basic (no mounting) | - · FKM · PT | $90.02 | |
| SCD63X100S | 100 mm | Basic (no mounting) | S · std seal · PT | $81.18 | |
| SCD63X100STC | 100 mm | TC center trunnion | S · std seal · PT | $101.65 | |
| SCD63X120 | 120 mm | Basic (no mounting) | - · std seal · PT | $78.85 | |
| SCD63X120TC | 120 mm | TC center trunnion | - · std seal · PT | $99.32 | |
| SCD63X125 | 125 mm | Basic (no mounting) | - · std seal · PT | $78.85 | |
| SCD63X125H | 125 mm | Basic (no mounting) | - · FKM · PT | $92.35 | |
| SCD63X125S | 125 mm | Basic (no mounting) | S · std seal · PT | $83.50 | |
| SCD63X125STC | 125 mm | TC center trunnion | S · std seal · PT | $103.98 | |
| SCD63X150 | 150 mm | Basic (no mounting) | - · std seal · PT | $80.92 | |
| SCD63X150S | 150 mm | Basic (no mounting) | S · std seal · PT | $85.57 | |
| SCD63X150TC | 150 mm | TC center trunnion | - · std seal · PT | $101.39 | |
| SCD63X150STC | 150 mm | TC center trunnion | S · std seal · PT | $106.04 | |
| SCD63X160 | 160 mm | Basic (no mounting) | - · std seal · PT | $83.25 | |
| SCD63X160S | 160 mm | Basic (no mounting) | S · std seal · PT | $87.90 | |
| SCD63X160STC | 160 mm | TC center trunnion | S · std seal · PT | $108.37 | |
| SCD63X170 | 170 mm | Basic (no mounting) | - · std seal · PT | $83.25 | |
| SCD63X175 | 175 mm | Basic (no mounting) | - · std seal · PT | $83.25 | |
| SCD63X175S | 175 mm | Basic (no mounting) | S · std seal · PT | $87.90 | |
| SCD63X175STC | 175 mm | TC center trunnion | S · std seal · PT | $108.37 | |
| SCD63X180 | 180 mm | Basic (no mounting) | - · std seal · PT | $85.83 | |
| SCD63X180S | 180 mm | Basic (no mounting) | S · std seal · PT | $90.48 | |
| SCD63X192S | 192 mm | Basic (no mounting) | S · std seal · PT | $90.48 | |
| SCD63X200 | 200 mm | Basic (no mounting) | - · std seal · PT | $85.83 | |
| SCD63X200S | 200 mm | Basic (no mounting) | S · std seal · PT | $90.48 | |
| SCD63X200STC | 200 mm | TC center trunnion | S · std seal · PT | $110.96 | |
| SCD63X220S | 220 mm | Basic (no mounting) | S · std seal · PT | $92.81 | |
| SCD63X225TC | 225 mm | TC center trunnion | - · std seal · PT | $108.63 | |
| SCD63X240 | 240 mm | Basic (no mounting) | - · std seal · PT | $90.69 | |
| SCD63X250 | 250 mm | Basic (no mounting) | - · std seal · PT | $90.69 | |
| SCD63X250S | 250 mm | Basic (no mounting) | S · std seal · PT | $95.34 | |
| SCD63X250STC | 250 mm | TC center trunnion | S · std seal · PT | $115.82 | |
| SCD63X285S | 285 mm | Basic (no mounting) | S · std seal · PT | $100.00 | |
| SCD63X300 | 300 mm | Basic (no mounting) | - · std seal · PT | $95.34 | |
| SCD63X300S | 300 mm | Basic (no mounting) | S · std seal · PT | $100.00 | |
| SCD63X300STC | 300 mm | TC center trunnion | S · std seal · PT | $120.47 | |
| SCD63X312S | 312 mm | Basic (no mounting) | S · std seal · PT | $104.91 | |
| SCD63X350 | 350 mm | Basic (no mounting) | - · std seal · PT | $100.26 | |
| SCD63X350S | 350 mm | Basic (no mounting) | S · std seal · PT | $104.91 | |
| SCD63X400 | 400 mm | Basic (no mounting) | - · std seal · PT | $105.12 | |
| SCD63X400S | 400 mm | Basic (no mounting) | S · std seal · PT | $109.77 | |
| SCD63X434S | 434 mm | Basic (no mounting) | S · std seal · PT | $114.68 | |
| SCD63X450 | 450 mm | Basic (no mounting) | - · std seal · PT | $110.02 | |
| SCD63X450S | 450 mm | Basic (no mounting) | S · std seal · PT | $114.68 | |
| SCD63X500 | 500 mm | Basic (no mounting) | - · std seal · PT | $114.42 | |
| SCD63X500S | 500 mm | Basic (no mounting) | S · std seal · PT | $119.07 | |
| SCD63X502S | 502 mm | Basic (no mounting) | S · std seal · PT | $130.03 | |
| SCD63X550 | 550 mm | Basic (no mounting) | - · std seal · PT | $125.38 | |
| SCD63X550S | 550 mm | Basic (no mounting) | S · std seal · PT | $130.03 | |
| SCD63X560TC | 560 mm | TC center trunnion | - · std seal · PT | $145.85 | |
| SCD63X670S | 670 mm | Basic (no mounting) | S · std seal · PT | $140.73 | |
| SCD63X700STC | 700 mm | TC center trunnion | S · std seal · PT | $161.20 | |
| SCD63X800S | 800 mm | Basic (no mounting) | S · std seal · PT | $151.18 | |
| SCD63X825 | 825 mm | Basic (no mounting) | - · std seal · PT | $166.53 |
Need a combination that is not listed? Request a quote.
About 1402 N at 0.5 MPa covers most pushing, lifting and indexing tasks.
Foot or flange mounting holds the cylinder rigid for clamps.
Clevis and trunnion versions drive mechanisms that swing.
Start with the stroke. Pick the exact travel your machine needs; a longer stroke adds length, weight and air consumption without adding force. If your length is not listed, request a quote and we will confirm whether it can be built.
Then choose the mounting. Basic (no code) uses the cylinder's own mounting holes. This bore is stocked with LB foot, FA front flange, TC center trunnion. Foot and flange mountings hold the cylinder rigid for straight-line loads; clevis and trunnion mountings let it pivot when the load moves in an arc.
Finally pick the version: S adds a magnet for position sensors; the standard seal suits general automation; H (FKM) is for higher temperatures or oil-contaminated air.
No. Every SCD63 gives about 1402 N in both directions at 0.5 MPa, whatever the stroke.
1/4" ports, PT thread as standard.
Basic plus LB foot, FA front flange, TC center trunnion. Use foot or flange for straight-line loads, clevis or trunnion when the cylinder must pivot.
Usually yes. Request a quote with the stroke, mounting and version and we will confirm whether it can be built, plus price and lead time.
0.15 to 1.0 MPa operating pressure (proof 1.5 MPa) and -20 to +70 °C on filtered air.
No. You can order a single SCD63. Orders are processed and handed to the carrier within 3-5 business days.
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.