AirTAC TTQ25 Stopper Cylinder, Single Acting, Ø25 Bore
Every stocked AirTAC TTQ25 stopper cylinder on one page: 18 order codes from $41.84. Pick the stroke, stopper type and magnet to see the exact order code and price.
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC TTQ25
The AirTAC TTQ25 is a fixed-height stopper cylinder with a Ø25 mm bore and 10-20 mm stroke, mounted by through holes or the tapped holes at both ends, used to stop pallets, boxes and workpieces on conveyors. It is single acting, pull-in type: air retracts the rod, and when the air is cut the spring pushes it back up, so the stopper rises if the supply fails. The thicker piston rod resists impact better.
The rod end comes as a round rod, flat rod or roller. It follows JIS standards and needs no lubrication; the body has sensor grooves on two sides.
TTQ25 Technical Specifications
| Model | TTQ25 |
|---|---|
| Action | Single acting, spring extend |
| Mounting | Through holes, tapped both ends |
| Bore | Ø25 mm |
| Strokes | 10, 15, 20 mm (+1.0/0) |
| Port | M5×0.8 |
| Stopper types | Round rod, Flat rod, Roller |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0760..P0761), TTQ series specifications and ordering code.
How the TTQ25 Order Code Is Built
| TWQ / TTQ | Double acting / single acting pull-in |
|---|---|
| 25 | Bore (mm) |
| ×10 / 15 / 20 | Stroke (mm) |
| S | Magnet (blank = none) |
| C / B / R | Stopper: round rod, flat rod, roller |
All AirTAC TTQ25 Order Codes (18)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Stroke | Stopper | Magnet | Price | Select |
|---|---|---|---|---|---|
| TTQ25X10C | 10 mm | Round rod | No magnet | $41.84 | |
| TTQ25X10SC | 10 mm | Round rod | Magnet | $44.89 | |
| TTQ25X10B | 10 mm | Flat rod | No magnet | $46.75 | |
| TTQ25X10SB | 10 mm | Flat rod | Magnet | $49.74 | |
| TTQ25X10R | 10 mm | Roller | No magnet | $53.73 | |
| TTQ25X10SR | 10 mm | Roller | Magnet | $56.73 | |
| TTQ25X15C | 15 mm | Round rod | No magnet | $43.23 | |
| TTQ25X15SC | 15 mm | Round rod | Magnet | $46.28 | |
| TTQ25X15B | 15 mm | Flat rod | No magnet | $48.14 | |
| TTQ25X15SB | 15 mm | Flat rod | Magnet | $51.14 | |
| TTQ25X15R | 15 mm | Roller | No magnet | $55.12 | |
| TTQ25X15SR | 15 mm | Roller | Magnet | $58.12 | |
| TTQ25X20C | 20 mm | Round rod | No magnet | $44.89 | |
| TTQ25X20SC | 20 mm | Round rod | Magnet | $47.89 | |
| TTQ25X20B | 20 mm | Flat rod | No magnet | $49.74 | |
| TTQ25X20SB | 20 mm | Flat rod | Magnet | $52.80 | |
| TTQ25X20R | 20 mm | Roller | No magnet | $56.73 | |
| TTQ25X20SR | 20 mm | Roller | Magnet | $59.78 |
Need a combination that is not listed? Request a quote.
Where the TTQ25 Is Used
Conveyor stops
Stops pallets and cartons at a work station or buffer.
Pallet indexing
Holds loads in a queue and releases them one by one.
Assembly lines
Positions workpiece carriers for an operation.
Choosing the Right TTQ25 Configuration
Choose the stroke: 10, 15, 20 mm on Ø25, tolerance +1.0/0 mm. Size the bore with the impact load and speed charts in the catalog.
Then the stopper: C round rod; B flat rod; R roller.
S adds a magnet for position sensors.
AirTAC TTQ25 FAQ
On this bore the round rod, flat rod and roller share one impact load chart in the catalog; check your load and conveyor speed against it. The lever roller with oil shock absorber comes on Ø32 and up.
TWQ is double acting; TTQ is single acting, pull-in type: the spring raises the stopper when air is cut.
0.25-1.0 MPa on Ø20, 0.2-1.0 MPa on other bores, proof pressure 1.5 MPa, -20 to +70 °C, on air filtered to 40 µm. No lubrication.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the TTQ25 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the TTQ25
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.