AirTAC CPV10 Micro Solenoid Valve, 3/2-Way Direct-Acting, 10 mm Wide
Every stocked AirTAC CPV10 micro valve on one page: 8 order codes from $15.11. Pick the voltage and lead wire to see the exact order code and price.
With manual override (P)
This combination is not a stock order code. Request a quote and we will confirm availability and price.
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the AirTAC CPV10
The AirTAC CPV10 is a 10 mm wide, direct-acting 3/2-way micro solenoid valve with a Ø0.55 mm orifice and a plug-in terminal. It weighs 15 g, draws DC 0.7 W · AC 1.5 VA, and switches in under 7 ms on / off. A surge suppressor protects the coil, DC versions accept either polarity, and AC versions use a full-wave bridge rectifier to reduce hum. A manual override with a LOCK position helps setup.
It works from 0 to 0.8 MPa on air filtered to 40 µm, at -20 to +70 °C. The valve mounts alone with the two screws supplied, or on a CPV10M manifold base.
CPV10 Technical Specifications
| Model | CPV10 |
|---|---|
| Function | 3/2-way, direct-acting |
| Body width | 10 mm |
| Orifice | Ø0.55 mm |
| Effective area P→A | 0.25 mm² (Cv 0.014) |
| Effective area A→R | 0.35 mm² (Cv 0.02) |
| Weight | 15 g |
| Fluid | Air (filtered by 40 µm element) |
|---|---|
| Operating pressure | 0 – 0.8 MPa (0 – 114 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to +70 °C |
| Coil power | DC 0.7 W · AC 1.5 VA |
| Voltage tolerance | DC ±10%, AC +15% / -10% |
| Insulation / protection | Class F / dust-proof |
| Response time | under 7 ms on / off |
Source: AirTAC Products Catalog 2026A (PDF01-P0022), CPV10 specifications and ordering code.
How the CPV10 Order Code Is Built
| CPV | Micro solenoid valve |
|---|---|
| 10 | Body width 10 mm |
| B / F / A / C | Voltage: DC24V (B), DC12V (F), AC220V (A), AC110V (C) |
| P | Manual override |
| -050 / -200 | Lead wire 0.5 m / 2.0 m |
All AirTAC CPV10 Order Codes (8)
Each order code links to its own datasheet page. Use Select to load it into the configurator above.
| Order code | Voltage | Lead | Override | Price | Select |
|---|---|---|---|---|---|
| CPV10BP-050 | DC24V (B) | 0.5 m (-050) | With manual override (P) | $15.11 | |
| CPV10BP-200 | DC24V (B) | 2.0 m (-200) | With manual override (P) | $16.25 | |
| CPV10FP-050 | DC12V (F) | 0.5 m (-050) | With manual override (P) | $15.11 | |
| CPV10FP-200 | DC12V (F) | 2.0 m (-200) | With manual override (P) | $16.25 | |
| CPV10AP-050 | AC220V (A) | 0.5 m (-050) | With manual override (P) | $15.11 | |
| CPV10AP-200 | AC220V (A) | 2.0 m (-200) | With manual override (P) | $16.25 | |
| CPV10CP-050 | AC110V (C) | 0.5 m (-050) | With manual override (P) | $15.11 | |
| CPV10CP-200 | AC110V (C) | 2.0 m (-200) | With manual override (P) | $16.25 |
Need a combination that is not listed? Request a quote.
Where the CPV10 Is Used
Small cylinders and grippers
3/2-way micro valves drive small single-acting cylinders and grippers.
Air blow and vacuum ejectors
Fast, low-power switching of small air flows.
Compact control panels
Manifolds share one supply, one exhaust and one electrical connection.
Choosing the Right CPV10 Configuration
Choose the coil voltage: DC24V (B), DC12V (F), AC220V (A), AC110V (C). Tolerance is DC ±10%, AC +15% / -10%.
Then the lead wire length: -050 is 0.5 m, -200 is 2.0 m. The terminal plugs in vertically or horizontally.
AirTAC CPV10 FAQ
A direct-acting 3/2-way solenoid valve, 10 mm wide, with a Ø0.55 mm orifice (P→A 0.25 mm² (Cv 0.014), A→R 0.35 mm² (Cv 0.02)).
DC24V (B), DC12V (F), AC220V (A), AC110V (C).
Yes: on a CPV10M manifold base (2 to 20 stations), with blank plates for unused stations.
No. You can order a single piece. Orders are processed and handed to the carrier within 3-5 business days.
Buying the CPV10 from AirtacDistr
Genuine AirTAC parts
Every order code on this page is the AirTAC factory part number. Specifications follow the AirTAC Products Catalog 2026A. About us
Ready in 3-5 business days
That is our time to process the order and hand it to the carrier. No minimum order: a single piece can be ordered.
14-day returns, 1-year warranty
Return within 14 days of delivery; the buyer pays return shipping. The warranty covers defects not caused by misuse. Return policy
Engineering help
Send your application details and we will confirm the right order code, usually within 7-8 hours. Ask us
Page data checked against the live catalog on 2026-11-03.
Request a Quote for the CPV10
Send the order code, quantity and destination. We confirm price, stock and lead time, usually within 7-8 hours.